Abstract:Phosphogypsum is an industrial waste generated in the production of fertilizers causing environmental problems. Calcined phosphogypsum (CPG) is obtained by low-temperature calcination and dehydration of phosphogypsum. CPG is mainly used to produce building materials. However, mechanical strength properties and water resistance of CPG materials is extremely poor, which leads to its relatively low utilization rate in construction industry. To address this issue, various amount of Ordinary Portland cement (OPC), fly ash (FA), rice husk (RH) and modified admixtures (AD) were mixed with the CPG to obtain CPG-based composite cementitious materials, which enhanced the water resistance and mechanical strength of the corresponding hardened materials. The influence of different contents of cement on the setting time, hydration heat, hydration products, mechanical properties, water absorption, heavy metal leaching and deterioration coefficient of the composite cementitious material is investigated. The results showed that the optimal mixing ratio of CPG: OPC: FA: RH was 57: 20: 10: 13 considering the water resistance and mechanical strength properties of CPG-based composite cementitious materials. On these conditions, the compressive strength, the flexural strength, water absorption and deterioration coefficient of the specimens at 28 days are 6.1 MPa, 4.6 MPa, 29.4% and 0.66 respectively, which were in line with the national standard of phosphorus building gypsum wallboard. It was demonstrated that two skeleton types are present in the samples prepared using CPG-based composite cementitious materials, which had a synergistic support effect on the structure. The first skeleton was formed by gypsum dihydrate crystals (CaSO 4 ·2H 2 O) and provided strength to the specimens at an early stage, while the second skeleton was formed by ettringite (AFt) and C–S–H gels, which provided strength at a later stage. The skeletons make the hardened materials denser and more waterproof. Moreover, the composite materials exhibited a positive solidification effect on heavy metals present in CPG.

Hydration mechanism and thermodynamic simulation of ecological ternary cements containing phosphogypsum

Improvement of the Hydration Kinetics of High Ferrite Cement: Synergic Effect of Gypsum and C 3 S–C 4 AF Systems

Hydration Products and Microstructural Properties Analysis of Magnesium Phosphate Cement Comprising with Industrial Residues

Calorimetric Study of Ternary Binder of Calcium Aluminate Cement, Portland-limestone Cement and FGD Gypsum

Hydration characteristics of tetracalcium aluminoferrite phase in mixes containing β-hemihydate and phosphogypsum

Hydration behavior and strength development of supersulfated cement prepared by calcined phosphogypsum and slaked lime

Hydration characteristics of tricalcium aluminate phase in mixes containing β-hemihydate and phosphogypsum

Study on the Mechanical Properties, Microstructure and Hydration Mechanism of Phosphogypsum-Based Geopolymer Cement with Added Micron-Sized Silica Particles

Early Hydration Properties and Reaction Kinetics of Multi-Composite Cement Pastes with Supplementary Cementitious Materials (Scms)

Effect of amorphous aluminum hydroxide on the phosphogypsum-based cementitious materials in prefabricated building field

Development and optimization of phosphogypsum-based geopolymer cement

Influence of cement on properties of calcined phosphogypsum based composite cementitious materials

A Sustainable Composite Cementitious Material Manufactured by Phosphogypsum Waste

Effects of phosphogypsum on hydration properties and strength of calcium aluminate cement

Research on formulation optimization and hydration mechanism of phosphogypsum-based filling cementitious materials

The application of thermal analysis to study the hydration behavior of tricalcium aluminate-gypsum in the presence of polycarboxylate-based superplasticizers

Hydration Mechanism and Phase Assemblage of Ternary Blended Cements Based on Sewage Sludge Ash and Limestone: Modified by Na2SO4

Low-Energy Consumption Preparation of Fine Waterproof Cementitious Material with High-Volume Phosphogypsum

Utilization of tricalcium aluminate as modifier on phosphogypsum-based full solid-waste cementitious material

Effect of modified phosphogypsum on the hydration properties of the phosphogypsum-based supersulfated cement