Abstract:Li metal is considered as the “Holy Grail” of energy storage systems due to its extremely high theoretical specific capacity (3860 mAh g−1), low gravimetric density (0.59 g cm−3), and lowest negative redox potential (−3.040 V vs. standard hydrogen electrode). The bright prospects give rise to worldwide interests in the metallic Li for the next generation energy storage systems, including highly considered rechargeable metallic Li batteries such as Li-O2 and Li-sulfur (Li–S) batteries. However, the formation of Li dendrites induced by inhomogeneous distribution of current density on the Li metal anode and the concentration gradient of Li ions at the electrolyte/electrode interface is a crucial issue that hinders the practical demonstration of high-energy-density metallic Li batteries. A unique nanostructured anode with Li metal distributed in fibrous Li7B6 matrix is proposed as a promising anode to prevent the dendrite growth. The nanostructured anode is with a large specific area, thus rendering a low current density on the Li metal anode. The dendrite growth is effectively inhibited via decreasing the growth velocity of Li deposits and then limiting the final size of deposited Li on the nanostructured matrix, thus leading to the dendrite-free morphology at macroscale. The concentration gradient of Li ions near the anode surface are sharply reduced, because the 3D Li7B6 fibrous structure provides quantities of free space to accommodate electrolyte. To improve the Coulombic efficiency of Li depositing/dissolution, a dual-phase Li metal anode containing polysulfide-induced SEI and nanostructured graphene framework was investigated for Li-S batteries. Free-standing graphene foam provides several promising features as underneath layer for Li anode, including (1) relative larger surface area than 2D substrates to lower the real specific surface current density and the possibility of dendrite growth, (2) interconnected framework to support and recycle dead Li, and (3) good flexibility to sustain the volume fluctuation during repeated incorporation/extraction of Li. The synergy between the LiNO3 and polysulfides provides the feasibility to the formation of robust SEI in an ether-based electrolyte. The efficient in-situ formed SEI-coated graphene structure allows stable Li metal anode with the cycling Coulombic efficiency of ∼97 % with high safety and efficiency performance, which is with a low resistance of 19.65 Ω (29.10 Ω for Cu foil based Li metal anode) and high ion conductivity of 5.42×10-2 mS cm-1 (2.33×10-2 mS cm-1 for Cu foil based Li metal anode). These results indicated that interfacial engineering of nanostructured electrode were a promising strategy to handle the intrinsic problems of Li metal anodes, thus shed a new light toward LMBs, such as Li-S and Li-O2 batteries with high energy density. Reference [1] X. B. Cheng, H. J. Peng, J. Q. Huang, F. Wei, Q. Zhang, Small 2014, 10, 4257 [2] X. B. Cheng, H. J. Peng, J. Q. Huang, R. Zhang, C. Z. Zhao, Q. Zhang, ACS Nano 2015, 9, 6373

Lamellar-structured anodes based on lithiophilic gradient enable dendrite-free lithium metal batteries with high capacity loading and fast-charging capability

Realizing Holistic Charging–Discharging for Dendrite-Free Lithium Metal Anodes Via Constructing Three-Dimensional Li+ Conductive Networks

An Interconnected Silver Coated Carbon Cloth Framework As a Host to Reduce Lithium Nucleation Over-Potential for Dendrite-Free Lithium Metal Anodes

An Ultrastable Lithium Metal Anode Enabled by Designed Metal Fluoride Spansules

Dendrite-free Li Metal Anodes with Confined Volume Change Towards Long Lifetime

Uniform lithium deposition enabled by a carbon nanotubes framework modified with nanosized ZIF-8 particles for dendrite-free lithium metal anode

Self-Organized Core-Shell Composite Electrodes for Copper-Free and Dendrite-Free Lithium Metal Batteries with Ultrahigh Energy Density

Constructing Sn-Cu2O Lithiophilicity Nanowires As Stable and High-Performance Lithium Metal Anodes

High-Coulombic-Efficiency Lithium Metal Anodes Enabled by Three-Dimensional Lithiophilic Nanostructures with Multiscale Porosity

Mesoporous Graphene Hosts for Dendrite-Free Lithium Metal Anode in Working Rechargeable Batteries

A Highly-Lithiophilic Mn 3 O 4 /ZnO-Modified Carbon Nanotube Film for Dendrite-Free Lithium Metal Anodes

Inverted Anode Structure for Long‐Life Lithium Metal Batteries

Dynamic charge modulate lithium uniform plating functional composite anode for dendrite-free lithium metal batteries

A lithiophilic and conductive interlayer for dendrite-free lithium metal anodes

3D Porous and Li-rich Sn–Li Alloy Scaffold with Mixed Ionic-Electronic Conductivity for Dendrite-Free Lithium Metal Anodes

Dendrites‐Free Lithium Metal Anode Enabled by Synergistic Surface Structural Engineering

Nanostructured Li Metal Anode to Inhibit Dendrite Growth in Safe Li-Metal Batteries

Long-Life Dendrite-Free Lithium Metal Electrode Achieved by Constructing a Single Metal Atom Anchored in a Diffusion Modulator Layer

A 3D Lithiophilic Host for Dendrite‐Free Lithium Metal Anode via One‐Step Carbonization of an Energetic Metal‐Organic Framework

Nano-Cu-embedded carbon for dendrite-free lithium metal anodes

Regulating lithium nucleation and deposition on carbon cloth decorated with vertically aligned Ag-doped MnO 2 nanosheet arrays for dendrite-free lithium metal anode