Abstract:Purpose: To objectively quantify glare of intraocular lenses (IOLs) utilizing a diffractive principle to extend visual range. To identify models with increased susceptibility to inducing glare. Setting: David J Apple Laboratory, Heidelberg, Germany. Design: Laboratory investigation. Methods: Glare was assessed by means of straylight parameter with a standard C-Quant (Oculus GmbH) intended for 7°. In addition, two C-Quant modifications were used to test lower angles (i.e., 2.5° and 3.5°). The following IOL models were assessed: PanOptix (Alcon Inc.) and AT Lisa Tri (Zeiss Meditec), Synergy (J&J Vision), and Triumf (BVI Medical), the latter two with chromatic-aberration correction at distance. Straylight from trifocals was compared against a monofocal W-60R lens (Santen). The C-Quant test was performed through the studied IOLs via additional optical components attached to its ocular. Results: Straylight (deg 2 sr -1 ) of the control was <1 at all tested angles, with the trifocal models showing comparable straylight at 7°. At 3.5°, Triumf’s straylight increased to 15.5 ±0.6, followed by Synergy (6.2 ±1.1), PanOptix (4.1 ±0.3), and AT Lisa Tri (2.0 ±0.8). The chromatic-aberration correcting models demonstrated correspondingly high straylight (Synergy: 18.8 ±1.3; Triumf: 17.3 ±0.5) at 2.5° compared to PanOptix (4.3 ±0.4), AT Lisa Tri (2.1 ±0.1) and monofocal IOLs yielding minimal or no increase. Conclusions: Trifocal IOLs induced increased straylight, but it was limited to lower angles, which may cause difficulties detecting these effects using a standard clinical approach. The latest IOL designs featuring chromatic aberration correction at far-focus appear more susceptible than the established trifocals to inducing glare phenomena.

Distortion in ophthalmic optics: A review of the principal concepts and models

DISTORTION OF THE IMAGE BY OPHTHALMIC PRISMS

An objective measurement approach to quantify the perceived distortions of spectacle lenses

Unified Optical Distortion Correction Method for Imaging Systems Using A Concise Geometrical Transformation Model

Distortion Correction in Surface Defects Evaluating System of Large Fine Optics

Linear fitting interpolation based on FOV division for correcting wide angle fish-eye lens distortion

Distortion correction for imaging on non-planar surface using freeform lens

67.2: Distortion Correction Using a Freeform Lens for Projection onto a Non‐planar Surface

The Optical Design of the Human Eye: a Critical Review

Wide-field optical eye models for emmetropic and myopic eyes

Linear optics of the eye and optical systems: a review of methods and applications

Method to Design Two Aspheric Surfaces for a Wide Field of View Imaging System with Low Distortion

Optimal correction of distortion for High Angular Resolution images. Application to GeMS data

Modeling and analysis of optical test of digital camera based on orthoperspective theory

Prism distortion and accommodative change

Critical Impact of Working Distance on OCT Imaging: Correction of Optical Distortion and Its Effects on Measuring Retinal Curvature

A Modeling Approach for Investigating Opto-Mechanical Relationships in the Human Eye Lens

Characterizing glare effects associated with diffractive optics in presbyopia-correcting intraocular lenses

A New Calibration Model of Camera Lens Distortion

In-situ Pre- and Postoperative Optical Resolution of the Lens and Pseudo-Phacos: a Preliminary Report

Higher order aberrations, refractive error development and myopia control: a review