Abstract:Owing to the significant advantages of linear transformer driver (LTD) technology, it becomes a new pulsed power technology for the construct of high-voltage, high-current pulsed-power accelerators. However, the LTD technology requires that the closure of the switches in the cavities are synchronized with the arrival of the electromagnetic pulse propagating downstream and the trigger technology is hard to achieve the stringent demands on the cavity-triggering sequences at present. In this paper, one kind of self-trigger LTD technology which is based on the principle of electromagnetic induction is proposed. In order to explore the feasibility of self-trigger LTD, a circuit model of a self-trigger LTD module composed of 60 1-MA cavities is established in PSPICE. Through simulation of the model, in which the closure of the gas switches in the cavities are depended on the threshold voltages of gas switches, the output pulse shaping capability of a self-trigger LTD module is analyzed. The results demonstrate that the 10%-90% rise time and the peak of output current of the self-trigger LTD module is acceptable compared with the output current of a LTD module, in which the firing sequence of each LTD cavity is synchronized with the speed the electromagnetic pulse propagates along the output line. The self-trigger LTD module can generate synchronous trigger pulses with the 10%-90% rise time of 53ns and the peak voltage of 100kv. The self-trigger LTD modules with different cavity-triggering sequences are simulated and their cavity-triggering sequences have been detected. The peak current at the output of self-trigger LTD module is in the range of 0.91MA to 0.95 MA with the 10%-90% rise time alters in the range of 53ns to 70n.

High-voltage pulse generator based on LTD concept for CuBr + Ne + HBr laser media excitation

Kinetic analysis of the factors limiting the output power of the Ne–CuBr UV laser

Pulsed Barium Vapor Laser with Hydrogen Additive and Interactive Circuit

Spectral Structure of CuBr Laser under Lower Pressures

Strontium Bromide Vapor Laser Excited By A Nanosecond Pulsed Longitudinal Discharge

Kinetic process of UV Cu+ laser in Ne-CuBr longitudinal pulsed discharge

20-W Sealed-Off Cubr Vapour Laser Excited with Modified Blumlein Circuit

High-Voltage Repetition-Frequency Charging Power Supply for Pulsed Laser

Module for three-pulsed power system

Dynamic model for CuBr UV laser

Model Analysis and Simulation of a Self-Trigger LTD Module

Investigation on Magnetic Pulse Compressor Used for Copper Halide Laser

High-End State-of-Art Copper Bromide Vapor Lasers: Optical, Electric and Thermal Properties

Self-triggering Topology for High-Power Nanosecond Pulse Generators Based on Avalanche Transistors Marx Bank Circuits and Linear Transformer Driver

A High Voltage Pulse Generator Based on Silicon-Controlled Rectifier for Field-Reversed Configuration Experiment

Two-side electron-beam pumping system for KrF excimer laser of hundred-Joule level

High-Power Single-Cycle Terahertz Cherenkov Radiation Using a High-Charge Bunch to Drive Dielectric Prisms

Kinetics of the CuBr vapor active medium under non-typical excitation conditions

Repetitive High-Voltage All-solid-state Marx Generator for Excimer DBD UV Sources

High Power Conductively Cooled Laser Diode Array Operating under Hard Pulse Condition

Development of Coaxial Discharge Multi-Output Pusle Trigger with Fast Rise Time Based on High Voltage Silicon Reactor Rectifier Energy Storage