Abstract:A new configuration of aluminum electrodes has been performed in an electrocoagulation reactor (ECR) to remove toxic metals from synthetic wastewater. The ECR contains four concentric-cubic electrodes that were connected to the DC power supply with a bipolar mode. The ability of this reactor to eliminate 200 ppm Pb, 200 ppm Cd and 200 ppm Cu from wastewater was investigated under the effect of pH (4-10), applied current (0.2-2.6 A), and the reaction time of (4-60 min). Two grams of NaCl were added to each experiment to enhance the electrical conductivity and minimize the passivation of cathode surfaces. The experiments, analysis, and optimization were conducted using response surface methodology type Box-Behnken design (RSM-BBD) and the Minitab-statistical software program. The highest elimination of heavy metals was: Pb-99.73%, Cd-98.54%, and Cu-98.92% at pH 10, 1.4 A of the applied current, and 60 min of the reaction time. The total real consumption of anodes under these conditions was 0.55 g, and the energy consumption was 12.71 kWh/m3. All reactions of metal removal that occurred in the present EC reactor obey the kinetic of a first-order reaction. Thermodynamics parameters of present electrocoagulation removal of heavy metals indicate an endothermic, spontaneous nature, and random irregularity at the liquid-solid interaction. The highest values of removal efficiencies and the considerably lowest values of energy and electrode consumption proved that the electrocoagulation technology applies in wastewater treatment containing toxic metals. • The anode electrodes were perforated to decrease the amount of electrode consumption, while the cathode electrodes were not perforated. • The new EC reactor eliminated Pb-99.73%, Cd-98.54%, and Cu-98.92% of 200 mg/l of each metal at pH 10, applied current of 1.4 A, and reaction time of 60 min. Moreover, the consumption of energy and electrodes was significantly low. • The performance indicator (R 2 ) of the studied responses was higher than 0.95.

Production of an electro-biological particle electrode (EBPE) from lithium slag and its removal performance to salicylic acid in a three-dimensional electrocatalytic biological coupling reactor (3D-EBCR)

A Novel Microbial Electrolysis Cell (MEC) Reactor for Biological Sulfate-Rich Wastewater Treatment Using Intermittent Supply of Electric Field

Using Electrode Electrolytes to Enhance Electrokinetic Removal of Heavy Metals from Electroplating Sludge

Advanced degradation of refractory organic compounds in electroplating wastewater by an in-situ electro-catalytic biological coupling reactor: Removal performance, microbial community and possible mechanism

Preparation of Catalytic Particle Electrodes from Steel Slag and Its Performance in a Three-Dimensional Electrochemical Oxidation System

Development of a novel 2D Ni-MOF derived NiO@C nanosheet arrays modified Ti/TiO2NTs/PbO2 electrode for efficient electrochemical degradation of salicylic acid wastewater

Accelerated Rhodamine B removal by enlarged anode electric biological (EAEB) with electro-biological particle electrode (EPE) made from steel converter slag (SCS).

Co-doping polymethyl methacrylate and copper tailings to improve the performances of sludge-derived particle electrode.

Preparation of Sn/Mn loaded steel slag zeolite particle electrode and its removal effect on rhodamine B(RhB)

Fabrication and electrocatalytic performance of a novel particle electrode

Particle electrode materials dependent tetrabromobisphenol A degradation in three-dimensional biofilm electrode reactors

A green process for exfoliating electrode materials and simultaneously extracting electrolyte from spent lithium-ion batteries

Applications of Spent Lithium Battery Electrode Materials in Catalytic Decontamination: A Review

Preparation of Pb/biochar Composite As Particle Electrode for Three-Dimensional Electrochemical Oxidation of Chemical Oxygen Demand from Chemical Wastewater

A closed-loop electrokinetic system for recovery of PbO2@Fe composite derived from lead-containing sludge

Preparation of blast furnace dust particle electrodes and their application in synergistic electrochemical degradation of saline polyvinyl alcohol wastewater

Enhanced chromium recovery and simultaneous sludge degradation in a novel bioelectrochemical system assembled with bio/abio-cathodes

Organic Pollutants Removal Performance and Enhanced Mechanism Investigation of Surface‐modified Steel Slag Particle Electrode

Pretreatment of hypersaline and high-organic wastewater with a three-dimensional electrocatalytic system: a pilot-scale study

Electrocoagulation removal of Pb, Cd, and Cu ions from wastewater using a new configuration of electrodes

Photoelectrocatalytic Degradation of Sulfosalicylic Acid and Its Electrochemical Impedance Spectroscopy Investigation