Numerical study of ignition and early flame propagation characteristics of methane–hydrogen blends assisted by glow plug in high-pressure direct-injection engines

Kang Pan,Xinlu Han,Zheng Xu,Longfei Chen,James S. Wallace

DOI: https://doi.org/10.1016/j.applthermaleng.2024.125114

IF: 6.4

2024-12-12

Applied Thermal Engineering

Abstract:The ignition of natural gas (primarily methane) using a hot surface like a glow plug (GP) is a promising strategy for clean combustion engine applications. However, achieving reliable and fast ignition with pure natural gas requires a high GP operating temperature, which can reduce the GP's lifespan. To overcome this limitation, blending natural gas with hydrogen (H 2 ), a highly reactive zero-carbon fuel, has emerged as an effective solution due to its potential to enhance ignition and combustion characteristics. Despite these potential benefits, the ignition and combustion behaviors of natural gas–hydrogen mixtures using a GP have not been thoroughly explored. In this study, the ignition and early flame propagation characteristics of methane (CH 4 ) and hydrogen mixtures using a glow plug in high-pressure direct-injection (DI) engines were numerically investigated using the KIVA-CANATERA model. The simulations comprehensively evaluated the impact of varying H 2 content, GP temperatures, and fuel injection pressures on three key ignition parameters: IDT (ignition delay by temperature), IDP (ignition delay by pressure), and IDD (ignition delay difference). Compared to pure CH 4 , the use of H 2 generates more OH radicals that significantly enhance chemical reactions, and then induce faster ignition (as evaluated by IDT) and a detectable rise in in-cylinder pressure (as evaluated by IDP). Adding 10% ∼ 30% H 2 to the fuel mixture can reduce IDT and IDP values by up to 9% and 27%. In addition, the use of H 2 maintains fuel ignition performance at low GP temperatures, extending the GP's lifespan in practical applications. For an 80%CH 4 -20%H 2 mixture, fuel ignition remains uncompromised when the GP operating temperature is reduced by 100 K from its normal value of 1500 K. The study also compared the impact of fuel injection pressure. The simulations indicated that higher injection pressures of 18 MPa and 24 MPa enhance turbulence, promoting ignition (evaluated by IDT) and early flame propagation (evaluated by IDP) for the 80%CH 4 -20%H 2 mixture by up to 14.7% and 5%, compared to the typical injection pressure of 12 MPa. All of these findings offer valuable insights for advancing the GP-assisted ignition technologies in low-carbon fuel applications.

energy & fuels,engineering, mechanical,thermodynamics,mechanics