Abstract:Inspections on microstructural design suggest that a high-strength Mg alloy can be achieved via the generation of co-precipitation of prismatic and basal precipitates with high number density and large aspect ratios. Currently, there is a lack of feasible approaches to generating such a microstructure. This work investigated the specific role of various Yb contents on the precipitation behavior, solute segregation and mechanical performance of cast Mg-9Gd-xYb-0.5Zn-0.2Zr alloys (x = 0, 0.5, 1 wt%). It was found that, the age hardening response of Mg-9Gd-0.5Zn-0.2Zr alloy could be significantly improved as the Yb addition increased, primarily ascribed to introduction of dense distribution of both prismatic and basal matrix precipitates involving gamma '', beta' and beta(1). Solute segregation of Yb had been examined utilizing high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), revealing the evidence of strong Yb segregation in both prismatic beta', beta(1) and basal gamma '' precipitates. Quantitative TEM analysis indicated that the increasing Yb addition was found to improve the number density of gamma '', beta' and beta(1) during isothermal ageing at 225 degrees C. The substantial improvement on yield strength (similar to 84 MPa) in peak-aged alloy was thereby achieved due to the co-precipitation of dense prismatic and basal strengthening phases associated with Yb addition (1 wt%). However, in addition to the promoted precipitation of these strengthening phases, Zn-Zr particles were confirmed to act as favorable nucleation sites for prismatic beta(1) phases in the under-aged condition. During prolonged ageing time, the addition of 1 wt% Yb was found to greatly accelerate the growth of these preferentially formed beta(1) phases and part of beta(1) transformed in situ into beta phases, accompanied by the gradual developments of matrix precipitate-free zones (PFZs). The greatly improved uneven distribution of these coarse beta-type phases concomitant with widened PFZs primarily led to the significant reduction in ductility as the Yb content increased up to 1%.

Achieving advanced elevated-temperature strength by tailoring precipitates in Mg-Sn-Y alloys

Tailoring precipitates in Mg–12Gd-3Y alloys by Sn addition to obtain superior elevated temperature mechanical properties

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Microstructure and Strengthening Mechanism of a Thermomechanically Treated Mg–10Gd–3Y–1Sn–0.5Zr Alloy

Large hardening response mediated by room-temperature dynamic solute clustering behavior in a dilute Mg-Zn-Ca-Sn-Mn alloy

Elevated temperature mechanical behavior of Mg-Y-Zn alloys

Effects of Mg2Sn precipitation on the age-hardening and deformation behaviour of a Mg-Sn-Al-Zn alloy

Nanoscale Precipitates with Quasicrystal Domains Enhanced Strength-Ductility Synergy in a Mg–6Zn–4Al–1Sn–0.5Mn Alloy

Precipitation Behavior and Mechanical Properties of a Mg–Zn–Y–Zr Alloy Processed by Thermo-Mechanical Treatment

Microstructural Evolution and Mechanical Performance of Cast Mg-3Nd-0.2Zn-0.5Zr Alloy with Y Additions

The Role of Yb Content on the Microstructural Evolution and Mechanical Characteristics of Cast Mg-9Gd-0.5Zn-0.2Zr Alloy

Microstructure Evolution and Mechanical Properties of High Performance Mg–10Gd–2Y–0·5Zn–0·3Zr Alloy During Heat Treatments

Enhancement of Hardening and Thermal Resistance of Mg–Sn-based Alloys by Addition of Cu and Al

Strengthening of Mg Alloy with Multiple RE Elements with Ag and Zn Doping via Heat Treatment

Strengthening Effect of Extruded Mg-8Sn-2Zn-2Al Alloy: Influence of Micro and Nano-Size Mg2Sn Precipitates

Microstructure and mechanical properties synergistically enhanced via heat treatment modification of the as-extruded Mg-1.5Al-0.5Zn-0.2Y-0.2Ca alloy

Enhanced Strength by Precipitate Modification in Wrought Mg–Al–Ca Alloy with Trace Mn Addition

Enhancing the Mechanical Properties of Mg–Al Alloy by Introducing Al2Y Nanoparticles Via Rapid-Cooling Solidification and Optimized Heat Treatments

Enhanced Mechanical Properties and Isotropy of Mg-2Al-0.8Sn Alloy through Ca Addition

Microstructure and Mechanical Properties of Mg-12Gd-2Y-Sm-0.5Zr Alloy

Microstructure and Strengthening Mechanism of High Strength Mg–10Gd–2Y–0.5Zr Alloy