Abstract:This paper reports a novel MEMS accelerometer whose effective stiffness can be adjusted flexibly and even tuned to almost zero by using the electrostatic softening effect of two parallel plate capacitors: the comb-finger capacitor and the triangular capacitor. When applied to a biased voltage, the comb-finger capacitor provides a relatively large and nonlinear negative stiffness in the gap-varying direction, while the triangular capacitor produces a small yet linear negative stiffness in the area-varying direction. The proposed accelerometer is fabricated by using a standard silicon-on-glass manufacturing process and controlled by a customized digital circuit. An analytical model based on the pull-in dynamics as a result of the stiffness tuning is developed and simulated to investigate the dynamic behavior of the nonlinear accelerometer system. The proportion integral differential controller is utilized to improve the performance of the accelerometer while maintaining the stability of the closed-loop system operating with extremely low effective stiffness. The experimental results indicate that a two-fold increase of the sensitivity, a 30% reduction of Allan deviation bias instability, and a 20% reduction of Allan velocity random walk are achieved for the open-loop accelerometer system. A 75% decrease of the standard deviation bias instability and nearly two orders of magnitude improvement of the noise floor at 1 Hz for the closed-loop accelerometer system are realized when the effective stiffness is reduced to almost zero.

Design and modeling of curved beam based differential capacitive MEMS accelerometer

Analysis of the Frequency-Dependent Vibration Rectification Error in Area-Variation-Based Capacitive MEMS Accelerometers.

A New Type of MEMS Accelerometer with Up-Tuning Structure

A Stiffness-Tunable MEMS Accelerometer

Design of Force-Balance Capacitive Accelerometer

Design, Modelling, and Simulation analysis of a Single Axis MEMS-based Capacitive Accelerometer

Design And Fabrication Of A Slanted-Beam Mems Accelerometer

Design and Simulation of a Silicon Beam Resonant Accelerometer

Design analysis, modeling and simulation of novel rectangular cantilever beam for MEMS sensors and energy harvesting applications

Structural Design and Testing of a Micromechanical Resonant Accelerometer

Design and Fabrication of a Micro-Electromechanical System Sandwich Capacitive Accelerometer

Modeling and Structural Analysis of MEMS Shallow Arch Assuming Multimodal Initial Curvature Profiles

Design of a Capacitive MEMS Accelerometer with Softened Beams

Versatile and Effective Design Platform for Surface Acoustic Wave Accelerometers

Flexible Tactile Sensor Array Mounted on the Curved Surface: Analytical Modeling and Experimental Validation

Finite Element Analysis of Four-Leg Capacitive Accelerometer

Modeling and Analysis of a SiC Microstructure-Based Capacitive Micro-Accelerometer

Improvement of CMOS-MEMS accelerometer using the symmetric layers stacking design

Near-zero stiffness accelerometer with buckling of tunable electrothermal microbeams

Z-Axis Capacitive Accelerometer With Novel Beams Using Sog Structure

Fabrication of a MEMS Capacitive Accelerometer with Symmetrical Double-Sided Serpentine Beam-Mass Structure