Abstract:The mechanism of using graphene oxide as a two-dimensional filler to increase the path length of the corrosive medium to the metal surface is limited to improving the corrosion resistance of the coating. This study propose novel dispersion and in-situ crosslinking reaction mechanism for constructing water-based heavy-duty anticorrosive coatings by using graphene oxide (GO) and waterborne epoxy resin (WEP). The results showed that GO can be uniformly dispersed directly into WEP without complex functional modifications. Oxygen-containing functional groups on moleculars structure of GO&WEP co-polymerized with diethylenetriamine (DETA) forming a continuous phase film which improved the density of the coating. Characterization techniques such as Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), thermal conductivity measurement instrument, pencil hardness tester, adhesion tester, salt spray corrosion test chamber, and electrochemical impedance spectroscopy (EIS) were used to evaluate coating structure and performance properties. The results showed that graphene characteristics enhanced physical properties and anti-corrosion performance of composite coatings. The construction mechanism of the coating is different from that of the current GO modified and dispersed in the coating as a two-dimensional filler to extend the path length of the corrosive medium to the metal surface. The coatings prepared by adding the optimum mass ratio of 0.1–0.2 % GO to WEP have the best physical properties and anti-corrosion properties. When the GO content is 0.2 wt%, the thermal conductivity increases by 86.0 %. After added 0.025 wt% GO, the coating hardness is increased by two grades directly from 2B to HB. With the addition of GO concentration increased to 0.05 wt%, the adhesion is increased from 2 to level 1.When the GO content exceeds 0.05 %, the coating will not bulge off after 4 months of salt water immersion experiment.

Effect of GO‐TiO2 to waterborne epoxy resin on microstructure and anti‐corrosion properties

Preparation and Properties of GO-SiO2 Anticorrosive Coatings

Study on Self-Sealing Pore Effect of GO/TiO2 Coating Controlled by Graphene Oxide

Using 3-Isocyanatopropyltrimethoxysilane to Decorate Graphene Oxide with Nano-Titanium Dioxide for Enhancing the Anti-Corrosion Properties of Epoxy Coating

Preparation and Anticorrosive Performance of Waterborne Epoxy Resin Composite Coating with Amino-Modified Graphene Oxide

Synergistic enhancement of polyvinylpyrrolidone‐modified TiO2 and graphene oxide on the corrosion resistance of waterborne epoxy

In-situ crosslinking reaction of graphene oxide & waterborne epoxy resin to construct continuous phase anticorrosive coating

A study on hybrid composite coatings: The significance of its surface wettability, dispersibility and thermal degradation performances

Preparation of modified montmorillonite/graphene oxide composites to enhance the anticorrosive performance of epoxy coatings

Exploring salt-mist corrosion resistance of GPTMS functionalized graphene oxide reinforced epoxy resin composite coating on shot-peened Ti-15333 titanium alloy

Preparation and Corrosion Resistance of γ-aminopropyltriethoxysilane-TiO2-GO/Waterborne Polyurethane Coating

Effect of covalent organic framework modified graphene oxide on anticorrosion and self-healing properties of epoxy resin coatings

Phytic Acid Intercalated Graphene Oxide for Anticorrosive Reinforcement of Waterborne Epoxy Resin Coating

Preparation of Superhydrophobic Materials and Establishment of Anticorrosive Coatings on the Tinplate Substrate by Alkylation of Graphene Oxide

Difunctional Silicon Dioxide Combined with Graphene Oxide Nanocomposite to Enhance the Anticorrosion Performance of Epoxy Coatings.

A novel and green 3-amino-1,2,4-triazole modified graphene oxide nanomaterial for enhancing anti-corrosion performance of water-borne epoxy coatings on mild steel

Study on anticorrosion properties of reduced graphene oxide reinforced waterborne epoxy coating

Modified graphene oxide/waterborne epoxy composite coating with enhanced corrosion resistance

A novel self-cleaning functional composite coating with extraordinary anti-corrosion performance in high pressure CO2 conditions

The synergistic effect of polyvinyl alcohol and graphene oxide on the corrosion resistance of waterborne coatings

Amino-Modified Graphene Oxide from Kish Graphite for Enhancing Corrosion Resistance of Waterborne Epoxy Coatings