Abstract:This paper develops a one-dimensional simulation model of a thermoelectric module aiming at its characteristic exploration and output performance prediction. Almost all related effects are considered including Seebeck, Peltier, Thomson effects, the spatial- and temperature-dependent thermoelectric material properties, as well as the other irreversible factors. In order to ensure its high accuracy and computational efficiency, the differential equations built for components of non-linear physical properties, and analytical equations for the others of constant properties are jointly solved by numerical methods and implemented in MATLAB integrated development environment. A small deviation of 1.44% exists between its calculated output power and that by a previously reported three-dimensional model under a specific wide load range (0-250 Omega), validating its accuracy of this model. Besides, it indicates that both the proportions of heat leakage through the occupied air zone and its maximum output power to the input total heat flow have the same order of magnitude. A rising proportion for the former has to be paid attention in case of a higher temperature difference applied. The assumption of regarding its electrical contact resistance as an identical external resistance connected with the load in series is computationally proved to generate a negligible discrepancy in terms of TEM characteristics and its output performance. Furthermore, with respect to the impacts of TEM geometry, the pre-set fixed substrate area weakens the equivalence of regarding a thermoelectric module with larger cross-section area of thermoelectric legs as multiple identical modules with smaller leg areas connected in parallel. It accounts for the better linearity of rising output power by a long leg than that by a short leg as the leg area increases. A long thermoelectric leg means an increased induced electrical potential and inner resistance as well, thus leading to a single peak of the output power as the leg length increases. Finally, a thermoelectric geometric optimization approach abased on the Hill-climbing algorithm is introduced and first applied for the maximum output. Its accuracy and efficiency are validated and analyzed detailedly by supplying different variables as initial search point. All the methods and conclusions in this paper can assist thermoelectric generators' performance estimation and guide the geometric optimizations regarding their large-scale applications in the future.

Optimal design of laminated thermoelectric cylindrical device based on neural network and thermo-electric-mechanical coupled model

Design Optimization of Thermoelectric Cooling Systems for Applications in Electronic Devices

Mechanics Modeling of Dynamic Characteristics of Laminated Thermoelectric Cylindrical Shells

Numerical Modeling of the Performance of Thermoelectric Module with Polydimethylsiloxane Encapsulation

MODELING AND OPTIMAL DESIGN FOR MICRO-THERMOELECTRIC GENERATOR

Designing thermoelectric self-cooling system for electronic devices: Experimental investigation and model validation

Modeling of Thermoelectric Generators with Effects of Side Surface Heat Convection and Temperature Dependence of Material Properties

Modeling and Optimization of Thermoelements by a Combined Analytical and Numerical Method

Numerical analysis of thermoelectric power generation coupled with temperature-dependent material properties

Predicting the Optimal Performance of a Concentrated Solar Segmented Variable Leg Thermoelectric Generator Using Neural Networks

Interlaminar Mechanical Performance of a Multi-Layered Photovoltaic-Thermoelectric Hybrid Device

Comprehensive Modeling for Geometric Optimization of a Thermoelectric Generator Module

Optimization of a unileg thermoelectric generator by the combination of Taguchi method and evolutionary neural network for green power generation

Multiparameter optimization of the thermoelectric module under the constant heat flux condition

Performance Investigation and Optimization of an L-type Thermoelectric Generator

An Analytical Model for Performance Prediction and Optimization of Thermoelectric Generators with Varied Leg Cross-Sections

Impact of internal connections and heat loss on simulated large-scale low-temperature thermoelectric generation system

Transient thermal stresses in a laminated spherical shell of thermoelectric materials

A synergistic approach to optimizing the performance of a concentrating solar segmented variable area leg thermoelectric generator using numerical methods and neural networks

Global structural optimization of annular thermoelectric generators based on a dual-finite-element multiphysical model

Thermoelectric Performance Evaluation and Optimization in a Concentric Annular Thermoelectric Generator under Different Cooling Methods