Abstract:Polyaniline/CuWO4 (PANi/CWO) nanocomposite was successfully synthesized using gamma irradiation and characterized by X‐ray diffraction (XRD), SEM, EDX, and so on. Adsorption experiments found that the nanocomposite has good removal capacity for Co‐60 (120.5 mg/g) and Cs‐137 (80.2 mg/g). Optimum pH for removal was determined to be 6. Kinetic data showed that removal is controlled by chemisorption and intraparticle diffusion. Equilibrium modeling found that the adsorption follows a monolayer/multilayer binding onto heterogeneous surfaces, best described by the Hill model. Thermodynamic parameters indicate an exothermic and spontaneous adsorption process. The nanocomposite can be regenerated over multiple cycles, retaining good removal efficiency. The PANi/CWO nanocomposite shows promise as an efficient and reusable adsorbent for removing radioactive cobalt and cesium from wastewater. The release of cobalt‐60 and cesium‐137 in the environment is considered dangerous pollutants. In this concern, the present work deals with gamma radiation‐induced synthesis of novel polyaniline/CuWO4 (PANi/CWO) nanocomposite adsorbent and estimating its potential adsorption capacity for cobalt‐60 and cesium‐137 from aqueous solution. The crystallite size of pure CWO NPs and PANi/CWO nanocomposite is found in the nanoscale range. Also, SEM images and XRD results confirmed the successful preparation of PANi/CWO nanocomposite. Further, the elemental mapping images proved that all the investigated elements were homogeneously distributed over the PANi/CWO nanocomposite. Besides, the adsorption experiments were conducted separately to investigate the adsorption behavior of cobalt‐60 and cesium‐137 by PANi/CWO nanocomposite. Adsorption processes have also been performed, and numerous factors, including medium pH, contact time, initial metal ion concentration, and temperature, have been tested. Batch experiments were done to get the optimum conditions for removing cobalt‐60 and cesium‐137. Four kinetic models were investigated, indicating that the adsorption process of cobalt‐60 and cesium‐137 onto PANi/CWO nanocomposite is controlled by chemisorption and intra‐particle diffusion. Four equilibrium isotherm models were investigated, revealing that the adsorption process is a monolayer and multilayer process on a heterogeneous surface. The (∆Ho) value suggested that this study's removal of cesium and cobalt has an endothermic behavior, whereas the positive (∆So) value proved that the examined system is random. The effect of temperature was investigated, and the calculated thermodynamic parameters indicated that the removal of cobalt‐60 and cesium‐137 by PANi/CWO nanocomposite has an endothermic behavior.

Effective removal of cesium ions by using PAN/PANI blend nanofibers prepared by electrospinning method

Gamma radiation‐induced synthesis of polyaniline/CuWO4 nanocomposite for potential sorption of cobalt‐60 and cesium‐137 from aqueous solutions

Poly(ε-caprolactone) electrospun nanofibers decorated with copper hexacyanoferrate as an ion exchanger for effective cesium ion removal

Nanocomposite adsorbent based on polyacrylonitrile fibers for rapid and selective removal of Cs radionuclides

Adsorption and desorption behaviors of cesium on rayon fibers coated with chitosan immobilized with Prussian blue

Amino modified nanofibers anchored to Prussian blue nanoparticles selectively remove Cs+ from water

Ultralight, robust, and high Prussian blue-loading polyacrylonitrile aerogel: Preparation, characterization and efficient adsorption/removal of Cs +

Effective removal of cesium by ammonium molybdophosphate–polyethylene glycol magnetic nanoparticles

Synthesis of PAN/ferrocyanide composite incorporated with cetrimonium bromide and its employment as a bifunctional adsorbent for coremoval of Cs+ and HCrO4− from aqueous solutions

Cesium ion adsorption and desorption on electrospun mesoporous silica nanofibers immobilized with Prussian blue

Shape stable poly(vinyl alcohol) hydrogels with immobilized metal hexacyanoferrates for cesium removal from waters

Readily regenerated porous fiber-supported metal tin sulfide for rapid and selective removal of cesium from wastewater

Preparations of PAN-based adsorbers for separation of cesium and cobalt from radioactive wastes

Removal of cesium ions using nickel hexacyanoferrates-loaded bacterial cellulose membrane as an effective adsorbent

Versatile Poly(Diallyl Dimethyl Ammonium Chloride)-Layered Nanocomposites for Removal of Cesium in Water Purification

Facile synthesis of pectin-stabilized magnetic graphene oxide Prussian blue nanocomposites for selective cesium removal from aqueous solution

Highly Crystalline Polyaniline Nanofibers Coating with Low-Cost Biomass for Easy Separation and High Efficient Removal of Anionic Dye ARG from Aqueous Solution

Efficient and selective sequestration of perfluorinated compounds and hexavalent chromium ions using a multifunctional spinel matrix decorated carbon backbone N-rich polymer and their mechanistic investigations

Efficient sequestration of cesium ions using phosphoric acid-modified activated carbon fibers from aqueous solutions

Dibenzo-18-crown-6/Polyacrylonitrile (PAN) nanofibers for metal ions adsorption: adsorption studies for Na+ and K+

Synthesis of hollow mesoporous silica spheres functionalized with copper ferrocyanide and its application for Cs+ removal