Abstract:Polyaniline/CuWO4 (PANi/CWO) nanocomposite was successfully synthesized using gamma irradiation and characterized by X‐ray diffraction (XRD), SEM, EDX, and so on. Adsorption experiments found that the nanocomposite has good removal capacity for Co‐60 (120.5 mg/g) and Cs‐137 (80.2 mg/g). Optimum pH for removal was determined to be 6. Kinetic data showed that removal is controlled by chemisorption and intraparticle diffusion. Equilibrium modeling found that the adsorption follows a monolayer/multilayer binding onto heterogeneous surfaces, best described by the Hill model. Thermodynamic parameters indicate an exothermic and spontaneous adsorption process. The nanocomposite can be regenerated over multiple cycles, retaining good removal efficiency. The PANi/CWO nanocomposite shows promise as an efficient and reusable adsorbent for removing radioactive cobalt and cesium from wastewater. The release of cobalt‐60 and cesium‐137 in the environment is considered dangerous pollutants. In this concern, the present work deals with gamma radiation‐induced synthesis of novel polyaniline/CuWO4 (PANi/CWO) nanocomposite adsorbent and estimating its potential adsorption capacity for cobalt‐60 and cesium‐137 from aqueous solution. The crystallite size of pure CWO NPs and PANi/CWO nanocomposite is found in the nanoscale range. Also, SEM images and XRD results confirmed the successful preparation of PANi/CWO nanocomposite. Further, the elemental mapping images proved that all the investigated elements were homogeneously distributed over the PANi/CWO nanocomposite. Besides, the adsorption experiments were conducted separately to investigate the adsorption behavior of cobalt‐60 and cesium‐137 by PANi/CWO nanocomposite. Adsorption processes have also been performed, and numerous factors, including medium pH, contact time, initial metal ion concentration, and temperature, have been tested. Batch experiments were done to get the optimum conditions for removing cobalt‐60 and cesium‐137. Four kinetic models were investigated, indicating that the adsorption process of cobalt‐60 and cesium‐137 onto PANi/CWO nanocomposite is controlled by chemisorption and intra‐particle diffusion. Four equilibrium isotherm models were investigated, revealing that the adsorption process is a monolayer and multilayer process on a heterogeneous surface. The (∆Ho) value suggested that this study's removal of cesium and cobalt has an endothermic behavior, whereas the positive (∆So) value proved that the examined system is random. The effect of temperature was investigated, and the calculated thermodynamic parameters indicated that the removal of cobalt‐60 and cesium‐137 by PANi/CWO nanocomposite has an endothermic behavior.

Synthesis of PAN/ferrocyanide composite incorporated with cetrimonium bromide and its employment as a bifunctional adsorbent for coremoval of Cs+ and HCrO4− from aqueous solutions

Synthesis of amidoximated polyacrylonitrile fibers and its use as adsorbent for Cr (VI) ions removal from aqueous solutions

Effective adsorptive uptake of hexavalent chromium ions from aqueous systems utilizing a superior activated nanobentonite@cobalt ferrite@carboxymethylcellulose nanocomposite

Novel Co-Polymerization of Polypyrrole/polyaniline on Ferrate Modified Biochar Composites for the Efficient Adsorption of Hexavalent Chromium in Water

Amidoxime modification of polyacrylonitrile/Pterocladia capillacea-derived activated carbon composite for adsorption of toxic chromium from aquatic environment

Efficient and selective sequestration of perfluorinated compounds and hexavalent chromium ions using a multifunctional spinel matrix decorated carbon backbone N-rich polymer and their mechanistic investigations

Facile synthesis of ZIF-8 incorporated electrospun PAN/PEI nanofibrous composite membrane for efficient Cr(VI) adsorption from water

Nano-Porous Composites of Activated Carbon–Metal Organic Frameworks (Fe-BDC@AC) for Rapid Removal of Cr (VI): Synthesis, Adsorption, Mechanism, and Kinetics Studies

Investigating the sequestration potential of a novel biopolymer-modified ceria/montmorillonite nanocomposite for chromium and coomassie brilliant blue from the aqueous phase: equilibrium and kinetic studies

Bi-layered hollow amphoteric composites: Rational construction and ultra-efficient sorption performance for anionic Cr(VI) and cationic Cu(II) ions

Polymer-assisted synthesis of ternary magnetic graphene oxide nanocomposite for the adsorptive removal of Cr(VI) and Pb(II) ions

Enhanced sequestration of heavy metals from aqueous solution on polyacrylamide grafted with cell@Fe3O4 nanocomposite

Green and simple synthesis of poly (catechol-tetraethylenepentamine)@aminopropyl-modified silica composite for removing toxic Cr(VI)

Inclusion of bimetallic Fe0.75Cu0.25-BDC MOFs into Alginate-MoO3/GO as a novel nanohybrid for adsorptive removal of hexavalent chromium from water

Synthesis of Porphyrin-based MOF/Cloisite-30B nanocomposite for selective dye adsorption: Optimization by Design-Expert, Adsorption, and Kinetic Study

Effective removal of cesium ions by using PAN/PANI blend nanofibers prepared by electrospinning method

CTAB-surface-functionalized magnetic MOF@MOF composite adsorbent for Cr(VI) efficient removal from aqueous solution

Effective adsorption and removal of Cr(VI) from wastewater using magnetic composites prepared by synergistic effect of polypyrrole and covalent organic frameworks

Installation of synergetic binding sites in β-Cyclodextrin-Bipyridine ionic liquid based magnetic sorbent for simultaneous removal of anionic PFAS and Cr (VI) in water matrix

Gamma radiation‐induced synthesis of polyaniline/CuWO4 nanocomposite for potential sorption of cobalt‐60 and cesium‐137 from aqueous solutions

Polypyrrole/bacterial cellulose nanofiber composites for hexavalent chromium removal