Abstract:A cryogenic broadband low noise amplifier (LNA) for quantum applications based on a standard 40-nm CMOS technology is reported. The LNA specifications are derived from the readout of semiconductor quantum bits at 4.2 K, whose quantum information signals are characterized as phase-modulated signals. To achieve broadband input matching impedance and low noise figure, the gate-to-drain capacitance of the input transistor is exploited. The goal is to involve a resistive and capacitive load into the input impedance match of a common-source stage with source inductive degeneration. The capacitive load is created by an LC parallel tank whose resonant frequency is lower than the operating frequency. The achieved non-constant in-band equivalent capacitance is proven to be beneficial to input impedance matching. The resistive part of the load is provided by the transconductance of the cascode stage implicitly. An inductor is added to the gate of the cascode transistor to suppress its noise, and a transformer-based resonator with two resonant frequencies serves as the load of the first stage, thus extending the operating bandwidth. Design considerations for the cryogenic temperature operation of the LNA are proposed and analyzed. The LNA achieves a measured gain ( $S_{21}$ ) of 35 ± 0.5 dB, return loss > 12 dB, and NF of 0.75–1.3 dB across the band (4.1–7.9 GHz), with 51.1-mW power consumption at room temperature, while it shows a measured gain of 42 ± 3.3 dB, and NF of 0.23–0.65 dB with 39-mW power consumption at 4.2 K between 4.6 and 8 GHz. To the best of our knowledge, this is the first report of a cryogenic LNA based on a bulk CMOS process working above 4 GHz showing sub-1-dB NF both at room and cryogenic temperatures.

Low noise cryogenic electronics: preamplifier configurations with feedback on the bolometer

A 0.32 $\times$ 0.12 mm$^{2}$ Cryogenic BiCMOS 0.1–8.8 GHz Low Noise Amplifier Achieving 4 K Noise Temperature for SNWD Readout

Ultra Wideband 43 GHz Preamplifier with up to 60 dB adjustable Gain for accurate Noise Figure Measurement of Cryogenic LNAs

Low-noise terahertz Microbolometer readout circuit

Low noise high-Tc superconducting bolometers on silicon nitride membranes for far-infrared detection

A low noise and low power cryogenic amplifier for single photoelectron sensitivity with large arrays of SiPMs

Low-noise cryogenic microwave amplifier characterization with a calibrated noise source

Dependence of noise temperature on physical temperature for cryogenic low-noise amplifiers

Cryogenic sensor enabling broad-band and traceable power measurements

Temperature-stabilized differential amplifer for low-noise DC measurements

Research on Weak Signal Readout Systems for Neutrinoless Double-Beta Decay Experiments Based on Bolometers

Design and Measurement of P Band Cryogenic Low Noise Step Amplifier

Performance of cryogenic microbolometers and calorimeters with on-chip coolers

Low‐noise Readout Circuit for Thermo‐electrical Cooler‐less Uncooled Microbolometer Infrared Imager

An Ultra Low Noise Readout Integrated Circuit for Uncooled Microbolometers

A Cryogenic Low-Background Low-Noise CMOS Preamplifier for HPGe Detectors

Two-Stage Cryogenic HEMT Based Amplifier For Low Temperature Detectors

Demonstration of ultra-low noise equivalent power using a longitudinal proximity effect transition-edge sensor

A Wideband BiCMOS Thermal Noise Canceling Low Noise Amplifier with Temperature Compensation

A Cryogenic Broadband Sub-1-dB NF CMOS Low Noise Amplifier for Quantum Applications

Enhanced sensitivity of sub-THz thermomechanical bolometers exploiting vibrational nonlinearity