Electronically modulated nickel boron by CeO x doping as a highly efficient electrocatalyst towards overall water splitting

Huimin Wang,Huixiang Liu,Tao Feng,Lincai Wang,Wenyi Yuan,Qing Huang,Yanhui Guo

DOI: https://doi.org/10.1039/d1dt03278j

IF: 4

2022-01-01

Dalton Transactions

Abstract:A novel CeO x -NiB@NF catalyst with high activity and good stability towards both the HER and OER has been fabricated.

chemistry, inorganic & nuclear

What problem does this paper attempt to address?

Electronically Modulated Nickel Boron by CeOx Doping As a Highly Efficient Electrocatalyst Towards Overall Water Splitting.

Huimin Wang,Huixiang Liu,Tao Feng,Lincai Wang,Wenyi Yuan,Qing Huang,Yanhui Guo

DOI: https://doi.org/10.1039/d1dt03278j

IF: 4

2021-01-01

Dalton Transactions

Abstract:Exploiting economic, efficient and durable non-noble metal electrocatalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is promising, but still faces enormous challenges. Herein, the strategy of doping a metal boride with a rare earth metal oxide has been explored to develop a highly efficient bifunctional electrocatalyst. The novel electrocatalyst CeOx-NiB consists of CeOx-doped NiB supported on nickel foam, and was fabricated by a one-step mild electroless plating reaction. Remarkably, the CeOx-NiB@NF electrode delivers a current density of 10 mA cm-2 at overpotentials of only 19 mV and 274 mV for the HER and OER, respectively. Two-electrode electrolyzers with the CeOx-NiB@NF electrode require only 1.424 V to deliver 10 mA cm-2 for overall water splitting in 1.0 M KOH, outperforming the Pt-C/NF∥IrO2/NF electrolyzer. Meanwhile, the electrode also has good stability (can work for 100 hours at 10 mA cm-2) and industrial-grade current density. This work provides a new idea for the development of efficient and durable non-precious metal catalysts.
Cerium-Doped Nickel Sulfide Nanospheres as Efficient Catalysts for Overall Water Splitting

Dongxv Li,Hui Guo,Hong Wang,Lu Pan,Jianjian Lin

DOI: https://doi.org/10.1002/cssc.202400751

IF: 8.4

2024-10-21

ChemSusChem

Abstract:The development of non-precious metal electrocatalysts with excellent activity and durability for electrochemical water splitting has always been a goal. Transition metal sulfides are attractive electrocatalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). In this article, we designed and constructed efficient catalysts with multiple synergistic interactions and synthesized Ce-NiS2@NF nanosphere using a solvothermal method. Ce-NiS2@NF exhibits excellent HER performance, OER performance, and overall water splitting capability in alkaline electrolytes, demonstrating good stability. The addition of Ce influences the activity of the catalysts, attributed to the synergistic interactions creating more active sites and higher intrinsic activity through the introduction of Ce heteroatoms. Additionally, the self-supported conductive substrate promotes electron transfer, enhancing the intrinsic activity and active site density of the catalyst. This study provides an in-depth investigation into structural design and performance enhancement, offering ideas for designing efficient catalysts for overall water electrolysis. This work provides an in-depth study in terms of structural design performance enhancement and provides ideas for designing efficient alkaline bifunctional catalysts. Valuable insights have been provided in elucidating the intrinsic mechanism of the catalytic activity of cerium-doped nickel sulfide nanospheres, thus providing new guidance in the field of energy conversion technology.
Cerium decorated amorphous ternary Ni-Ce-B catalyst for enhanced electrocatalytic water oxidation

Shuai Wang,Rui Zhao,Tian Zheng,Zheng Lu,Yuan Fang,Wenjian Wang,Weidong Xue

DOI: https://doi.org/10.1016/j.surfin.2021.101447

IF: 6.2

2021-10-01

Surfaces and Interfaces

Abstract:Metal borides have been acknowledged as promising candidates for alkaline oxygen evolution reaction (OER). Here, amorphous ternary metal borides (Ni-Ce-B) with different molar ratios of Ce% are achieved by a facile wet chemical method. With the optimal 5% of Ce, the as-prepared Ni-Ce-B-5/NF electrode exhibits comparable OER performance with lower overpotential (240 mV) than that of pure Ni-B/NF electrode (330 mV) and other metal borides. The high activity of Ni-Ce-B/NF is attributed to the amorphous structure and synergistic effect of binary metal Ni and Ce in Ni-Ce-B materials. Additionally, CeO2-x forms and serves as an electron acceptor during the self-electrooxidation process, facilitating the formation of crystalline high-valence nickel species, resulting in robust electrocatalysis and long-term stability. This work presents a Ce-based metal boride as a promising candidate for the low-cost and highly efficient OER catalyst.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Quantum dot-doped CeOx–NiB with modulated electron density as a highly efficient bifunctional electrocatalyst for water splitting

Huimin Wang,Tao Feng,Lincai Wang,Weiju Hao

DOI: https://doi.org/10.1039/d2nr06561d

IF: 6.7

2023-03-14

Nanoscale

Abstract:Development of economical, efficient and durable non-noble metal electrocatalysts for the hydrogen/oxygen evolution reaction (HER/OER) holds great promise, but still faces great challenges. Herein, a strategy of doping metal borides with rare earth metal oxides and introducing silicon carbide (SiC) quantum dots has been explored to develop efficient bifunctional electrocatalysts. A novel electrocatalyst consists of SiC quantum dot-decorated CeO x –NiB supported on nickel foam via a one-step mild electroless plating reaction (denoted as CeO x –NiB/SiC@NF). Notably, the modulated electron density of the CeO x –NiB/SiC@NF electrode significantly boosts the electrochemically active surface area and electron transfer, and optimizes the hydrogen/water absorption free energy, which delivers current densities of 50 mA cm −2 and 10 mA cm −2 at overpotentials of only 131 mV and 234 mV for the HER and the OER, respectively. The target electrode requires only 1.43 V to provide 10 mA cm −2 for overall water splitting in 1.0 M KOH. Moreover, the electrode also exhibits good stability and durability at the industrial-grade current density (0.5–1 A cm −2 ). This work provides a new idea for the development of efficient and durable non-precious metal catalysts.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
CeO 2 -decorated Fe-doped Ni 2 P nanosheets for efficient electrocatalytic overall water splitting at high current densities

Yuxin Huang,Xueda Ding,Baobing Huang,Zailai Xie

DOI: https://doi.org/10.1016/j.jallcom.2024.173672

IF: 6.2

2024-02-08

Journal of Alloys and Compounds

Abstract:The development of highly efficient bifunctional electrocatalysts with excellent stability at high current densities for overall water splitting is a challenging but urgent goal. Herein, a novel kind of significantly efficient bifunctional electrocatalysts has been elaborately designed through the fabrication of Fe-doped Ni 2 P nanosheets decorated with CeO 2 nanoparticles (Fe-Ni 2 P/CeO 2 ) grown on Ni foam. It reveals the existence of electron transfer from Ni 2+ to Ce 4+ , resulting in an increase of Ni 3+ , of which the strong Lewis acidity promotes the adsorption of OH − and thus facilitates the formation and conversion of oxygen-related intermediates during the water splitting process. The resulting catalyst shows outstanding electrocatalytic activities for both oxygen evolution reaction (OER) (η 20 = 190 mV, η 1000 = 260 mV) and hydrogen evolution reaction (HER) (η 20 = 78 mV, η 1000 = 292 mV). Moreover, when utilized for overall water splitting, the Fe-Ni 2 P/CeO 2 requires very low voltages of 1.52 V and 2.88 V to achieve current densities of 20 mA cm −2 and 1000 mA cm −2 , respectively, outperforming the Pt/C || RuO 2 electrolyzer. Importantly, the as-designed electrolyzer exhibits exceptional durability at a high current density of 1000 mA cm −2 . This work has demonstrated an effective strategy for designing non-precious metal heterojunctions with abundant electrocatalytic active sites to drive efficient overall water splitting.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Electronic Regulation of Ce,F-Ni2P/CoP Catalyst for Efficient Water Splitting

Jing Peng,Yucheng Wu,Ning Long,Wei Shen,Yimin Jiang,Rongxing He,Ming Li

DOI: https://doi.org/10.1016/j.apsusc.2024.161258

IF: 6.7

2025-01-01

Applied Surface Science

Abstract:Designing efficient non-precious-metal bifunctional electrocatalysts is still challenging at present. Herein, the efficient Ce,F-Ni2P/CoP electrocatalyst for water splitting was successfully fabricated. As shown from the present investigation, the codoping of Ce and F in Ni2P/CoP induced the f-p-d gradient orbital coupling in the Ce-F-metal structural unit of the catalyst, significantly reducing the work function of the catalyst, which accelerated the reaction kinetics and improved the intrinsic catalytic activity. The catalyst exhibited the outstanding hydrogen evolution reaction (HER) activity in the full pH range and, especially in alkaline electrolyte, an ultra-low oxygen evolution reaction (OER) overpotential of 243 mV at 50 mA & sdot;cm(-2) and an excellent HER overpotential of 88 mV at 10 mA & sdot;cm(-2) were achieved. Moreover, Ce,F-Ni2P/CoP displayed an excellent overall water splitting (OWS) performance with eta(10 )= 1.52 V. DFT theoretical calculations also showed that the gradient orbital coupling resulted in the reduction of the work function of the catalyst. Our work provides a new understanding of designing and constructing high-performance catalysts.
Heterogeneous engineering of nickel-iron sulfide with cerium-promoted reconstruction for enhanced oxygen evolution

Jiayi Cao,Ruohan Zhao,Lu Bai,Yanji Wang,Zisheng Zhang,Lanlan Wu,Xiaohang Du,Jingde Li

DOI: https://doi.org/10.1016/j.apsusc.2023.157287

IF: 6.7

2023-08-01

Applied Surface Science

Abstract:The development of efficient oxygen evolution reaction (OER) electrocatalysts is critical for electrochemical water splitting. Herein, a cerium-doped Ni3S2/NiS/FeS heterogeneous structure nanoparticle supported on nickel foam (Ce-NiSx/FeS/NF) is prepared as a precatalyst for OER reaction in alkaline solution. The heterointerfaces of NiSx/FeS adjust the electronic structure and expose more active sites, accelerating the OER process. The Ce incorporation promotes the in situ reconstruction and oxidation of the sulfides to the heterogeneous NiOOH/FeOOH, which act as the actual active sites for the OER reaction. Thus, the Ce-NiSx/FeS/NF demonstrates excellent OER performance with a low overpotential of 125 mV at 10 mA cm−2 and long-term robustness. Additionally, a water splitting device is constructed using Ce-NiSx/FeS/NF and commercial Pt/C/NF as the anode and cathode, respectively. This device achieves a current density of 10 mA cm−2 at 1.38 V with 50 h of reliable continuous operation at 1.78 V. Density functional theory (DFT) calculation confirms that the active sites of Ce-NiOOH/FeOOH optimize intermediates adsorption energy (higher OH− adsorption energy and lower O2 desorption energy) and provide faster OER kinetics, conducive to the OER process. This work presents the concept of rare-earth-doping promotes reconstruction of heterogeneous transition-metal-based compounds for the development of high-performing OER electrocatalysts.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Facile generation of CeO 2 nanoparticles on multiphased NiS x nanoplatelet arrays as a free-standing electrode for efficient overall water splitting

Xinyue Zhang,Fuguang Liu,Xuqiang Ji,Liang Cui,Chuanming Li,Jingquan Liu

DOI: https://doi.org/10.1016/j.jcis.2023.09.016

IF: 9.9

2023-09-16

Journal of Colloid and Interface Science

Abstract:Constructing nanostructured electrocatalysts with heterointerface and finetuning their electronic properties are essential for high-efficient overall water splitting. Here, we prepared a well-designed nano-flower-like multiphase and hybrid material of NiS/NiS 2 /CeO 2 /NF (NiS x /CeO 2 /NF) with rich heterointerfaces and abundant active sites through solvothermal reaction and post-annealing treatment. The as-fabricated NiS x /CeO 2 /NF exhibits exceptional catalytic performance for OER and HER. Specifically, in 1 M KOH solution, it requires the low overpotentials of 326 and 92 mV to achieve the current density of 200 and 10 mA cm −2 for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), respectively. More satisfactorily, when NiS x /CeO 2 /NF is used as the bifunctional catalyst, a low voltage of only 1.53 V is required to achieve a current density of 10 mA cm −2 for overall water splitting. The excellent catalytic performance should be attributed to its special heterogeneous structure and the synergy effect between NiS x and CeO 2 . This work emphasizes the important significance of constructing efficient bifunctional electrocatalysts by reasonably designing heterostructures and multiphase components for overall water splitting.

chemistry, physical
Electronic modulation of sprout-shaped NiCoP nanoarrays by N and Ce doping for efficient overall water splitting

Ting Zhao,Guancheng Xu,Bingbing Gong,Jiahui Jiang,Li Zhang

DOI: https://doi.org/10.1007/s12274-023-5769-9

IF: 9.9

2023-06-24

Nano Research

Abstract:Bifunctional catalysts for hydrogen/oxygen evolution reactions (HER/OER) are urgently needed given the bright future of water splitting hydrogen production technology. Here, the self-supporting N and Ce dual-doped NiCoP nanoarrays (denoted N,Ce-NiCoP/NF) grown on Ni foam are successfully constructed. When the N,Ce-NiCoP/NF simultaneously acts as the HER and OER electrodes, the voltages of 1.54 and 2.14 V are obtained for driving 10 and 500 mA·cm −2 with a robust durability, and demonstrate its significant potential for practical water electrolysis. According to both experiments and calculations, the electronic structure of NiCoP may be significantly altered by strategically incorporating N and Ce into the lattice, which in turn optimizes the Gibbs free energy of HER/OER intermediates and speeds up the water splitting kinetics. Moreover, the sprout-shaped morphology significantly increases the exposure of active sites and facilitates charge/mass transfer, thereby augmenting catalyst performance. This study offers a potentially effective approach involving the regulation of anion and cation double doping, as well as architectural engineering, for the purpose of designing and optimizing innovative electrocatalysts.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Ni3N–CeO2 Heterostructure Bifunctional Catalysts for Electrochemical Water Splitting

Xin Ding,Run Jiang,Jialin Wu,Minghui Xing,Zelong Qiao,Xiaofei Zeng,Shitao Wang,Dapeng Cao

DOI: https://doi.org/10.1002/adfm.202306786

IF: 19

2023-09-04

Advanced Functional Materials

Abstract:Ni3N–CeO2/NF heterostructure is synthesized on the nickel foam for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The water electrolyzer based on Ni3N–CeO2/NF bifunctional catalyst exhibits better performance than that of Pt/C||IrO2 counterpart. In situ characterizations unveil that the introduction of CeO2 not only optimizes the structure of interface water for boosting HER, but also accelerates reconstruction of OV (oxygen vacancy)‐rich NiOOH for OER. Developing low‐cost and high‐efficient bifunctional catalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is greatly significant for water electrolysis. Here, Ni3N‐CeO2/NF heterostructure is synthesized on the nickel foam, and it exhibits excellent HER and OER performance. As a result, the water electrolyzer based on Ni3N‐CeO2/NF bifunctional catalyst only needs 1.515 V@10 mA cm−2, significantly better than that of Pt/C||IrO2 catalysts. In situ characterizations unveil that CeO2 plays completely different roles in HER and OER processes. In situ infrared spectroscopy and density functional theory calculations indicate that the introduction of CeO2 can optimizes the structure of interface water, and the synergistic effect of Ni3N and CeO2 improve the HER activity significantly, while the in situ Raman spectra reveal that CeO2 accelerates the reconstruction of OV (oxygen vacancy)‐rich NiOOH for boosting OER. This study clearly unlocks the different catalytic mechanisms of CeO2 for boosting the HER and OER activity of Ni3N for water splitting, which provides the useful guidance for designing the high‐performance bifunctional catalysts for water splitting.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Cr-doped CoFe2O4 nanorod array modified by oxygen vacancy-rich cerium oxide as an efficient bifunctional total water splitting catalyst

Yulin Duan,Zhengang Guo,Hua-nan Zhang,Tingting Wang,Jifan Zhang

DOI: https://doi.org/10.1039/d4se00966e

IF: 6.813

2024-08-29

Sustainable Energy & Fuels

Abstract:Highly efficient and stable bifunctional electrocatalysts for total water splitting are crucial for the realization of large-scale hydrogen production. In this study, we successfully synthesized CeOx-modified CoCryFe2-yO4 nanorod array structures on a nickel foam substrate via two-step hydrothermal method followed by calcination. It is demonstrated that Cr doping increases the electrical conductivity of the catalyst, which allows for a larger number of electrochemically accessible active sites at the catalyst terminals, thereby improving its activity. Modification of the CoCryFe2-yO4/NF surface with oxygen vacancy-rich CeOx resulted in a highly efficient and stable bifunctional catalyst (CoCryFe2-yO4@CeOx/NF), and the exceptional bifunctional activity and stability can be attributed to: (i) Cr doping and CeOx modification induced a self-assembly transformation of the catalyst morphology from a nanosphere structure to a nanorod array structure, resulting in an increased specific surface area; (ii) the high conductivity especailly in CoCr0.6Fe1. 4O4, allows electrochemical access to a greater number of active sites at the catalyst periphery; (iii) the introduction of abundant oxygen vacancies by CeOx modification, which alters the electronic structure of CoCryFe2-yO4, leading to electron redistribution of Co, Cr and Fe, shifting them to higher oxidation states favorable for catalytic reactions. This promotes the formation of highly catalytically active metal oxyhydroxides on the CoCryFe2-yO4 surface during the OER process, thereby enhancing the catalytic efficiency.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Impact of morphology and oxygen vacancy content in Ni, Fe co-doped ceria for efficient electrocatalyst based water splitting

Abhaya Kumar Mishra,Joshua Willoughby,Shanna L Estes,Keliann Cleary Kohler,Kyle S Brinkman

DOI: https://doi.org/10.1039/d4na00500g

2024-07-23

Abstract:Designing a highly efficient, low-cost, sustainable electrocatalyst for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) through water splitting is a current challenge for renewable energy technologies. This work presents a modified sol-gel route to prepare metal-ion(s) doped cerium oxide nanostructures as an efficient electrocatalyst for overall water splitting. Nickle (Ni) and iron (Fe) co-doping impacts the morphology in cerium oxide resulting in 5 nm nanoparticles with a mesoporous-like microstructure. The high level 20 mol% (1 : 1 ratio) of Ni + Fe bimetal-ion(s) doped CeO2 shows excellent HER and OER activities compared to the monodoped Fe/Ni and pristine CeO2. The co-doped catalysts required a low overpotential of 104 mV and 380 mV for HER and OER, respectively, in 1 M KOH, at a current density of 10 mA cm-2. The Tafel slopes of 95 mV dec-1 and 65 mV dec-1 were measured for HER and OER with the same representative samples which demonstrated excellent stability even after continuous operation for 20 hours in the alkaline medium. The unique morphology, enhanced oxygen vacancy (Ov) content and the synergistic effects of dopants in CeO2 play essential roles in enhancing the activities of Ni + Fe doped samples.
In Situ Constructing Lamella-Heterostructured Nanoporous CoFe/CoFe2O4 and CeO2−x As Bifunctional Electrocatalyst for High-Current-density Water Splitting

Yue Deng,Jin Wang,Shao-Fei Zhang,Zhi-Jia Zhang,Jin-Feng Sun,Tian-Tian Li,Jian-Li Kang,Hao Liu,Shi Bai

DOI: https://doi.org/10.1007/s12598-024-02926-z

IF: 6.318

2024-01-01

Rare Metals

Abstract:The stability and electrocatalytic efficiency of transition metal oxides for water splitting is determined by geometric and electronic structure, especially under high current densities. Herein, a newly designed lamella-heterostructured nanoporous CoFe/CoFe2O4 and CeO2−x, in situ grown on nickel foam (NF), holds great promise as a high-efficient bifunctional electrocatalyst (named R-CoFe/Ce/NF) for water splitting. Experimental characterization verifies surface reconstruction from CoFe alloy/oxide to highly active CoFeOOH during in situ electrochemical polarization. By virtues of three-dimensional nanoporous architecture and abundant electroactive CoFeOOH/CeO2−x heterostructure interfaces, the R-CoFe/Ce/NF electrode achieves low overpotentials for oxygen evolution (η10 = 227 mV; η500 = 450 mV) and hydrogen evolution (η10 = 35 mV; η408 = 560 mV) reactions with high normalized electrochemical active surface areas, respectively. Additionally, the alkaline full water splitting electrolyzer of R-CoFe/Ce/NF||R-CoFe/Ce/NF achieves a current density of 50 mA·cm−2 only at 1.75 V; the decline of activity is satisfactory after 100-h durability test at 300 mA·cm−2. Density functional theory also demonstrates that the electron can transfer from CeO2−x by virtue of O atom to CoFeOOH at CoFeOOH/CeO2−x heterointerfaces and enhancing the adsorption of reactant, thus optimizing electronic structure and Gibbs free energies for the improvement of the activity for water splitting.
Facile Construction of Heterostructural Ni3(NO3)2(OH)4/CeO2 Bifunctional Catalysts for Boosted Overall Water Splitting

Xinyue Zhang,Yanling Qiu,Qin Li,Fuguang Liu,Xuqiang Ji,Jingquan Liu

DOI: https://doi.org/10.1016/j.ijhydene.2022.05.106

IF: 7.2

2022-01-01

International Journal of Hydrogen Energy

Abstract:Interface engineering has aroused vitally widespread concern since it could be an effective strategy for exploring high-performance and low-cost water oxidation electrocatalysts. Herein, we report a hetero-structured Ni3(NO3)2(OH)4/CeO2/NF (NNO/CeO2/NF) electrode, exhibiting superior performance owning to the NO3-anion substitution for the OH-in nickel hydroxide to form Ni3(NO3)2(OH)4, together with its interface synergy with ceria. In alkaline solution, the NNO/CeO2/NF electrocatalyst could catalyze the OER with an over -potential of 330 mV to approach 50 mA cm-2. Also, it needs only an overpotential of 120 mV to reach 10 mA cm-2 for HER. Additionally, when a standard two-electrode water elec-trolyzer is fabricated by employing NNO/CeO2/NF as both the cathode and anode, it can generate 10 mA cm-2 at 1.64 V and operate steadily without performance degradation after 25 h. This research provides a novel perspective for reasonable design of advanced catalytic materials with improvements in the field of electrocatalysis. (c) 2022 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
Enhancing Full Water-Splitting Performance of Transition Metal Bifunctional Electrocatalysts in Alkaline Solutions by Tailoring CeO2-Transition Metal Oxides-Ni Nanointerfaces

Xia Long,He Lin,Dan Zhou,Yiming An,Shihe Yang

DOI: https://doi.org/10.1021/acsenergylett.7b01130

IF: 22

2018-01-01

ACS Energy Letters

Abstract:Rational design of highly efficient bifunctional electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is critical for sustainable energy conversion. Herein, motivated by the high activity of OER catalyst on water dissociation that is the rate-determining step of alkaline HER, a bifunctional catalyst of metallic nickel-decorated transition metal oxide nanosheets vertically grown on ceria film (ceria/NiTMO) is synthesized by composition controlling and surface engineering. Because of the idealized electronic structure of the active centers and the abundance of such sites, as well as a synergistic effect between the carbon cloth/ceria film and the in situ formed TMO/Ni nanoparticles, the as-synthesized ceria/NiTMO exhibited long-time stability and a low cell voltage of 1.58 V at 10 mA/cm(2) when applied as both the cathode and anode in alkaline solutions. Moreover, it is the first time that pH independent four-proton-coupled-electron-transfer processes and multiple adsorption desorption processes were found to occur at the interfaces of ceria/TMO and Ni/TMO in a single catalyst for catalyzing OER and HER, respectively.
Facile Synthesis of Co and Ce Dual-Doped Ni3S2 Nanosheets on Ni Foam for Enhanced Oxygen Evolution Reaction

University of Chinese Academy of Sciences,Zhang Tong,Wei Jiaxu,Feng Pengfei,Lanzhou University

DOI: https://doi.org/10.1007/s12274-020-2819-4

IF: 9.9

2020-01-01

Nano Research

Abstract:Developing efficient and stable oxygen evolution reaction (OER) electrocatalysts via doping strategy has well-documented for electrochemical water splitting. Herein, a homogeneous structure (denoted as Co/Ce-Ni3S2/NF) composed of Co and Ce dual doped Ni3S2 nanosheets on nickel foam was synthesized by a facile one-step hydrothermal method. Co and Ce dopants are distributed inside the host sulfide, thereby raising the active sites and the electrical conductivity. Besides, the CeOx nanoparticles generated by part of the Ce dopants as a cocatalyst further improve the catalytic activity by adding defective sites and enhancing the electron transfer. As a consequence, the obtained Co/Ce-Ni3S2/NF electrode exhibits better electrocatalytic activity than single Co or Ce doped Ni3S2 and pure Ni3S2, with low overpotential (286 mV) at 20 mA-cm−2, a small Tafel slope and excellent long-term durability in strong alkaline solution. These results presented here not only offer a novel platform for designing transition metal and lanthanide dual-doped catalysts, but also supply some guidelines for constructing catalysts in other catalytic applications.
Role of amorphous engineering and cerium doping in NiFe oxyhydroxide for electrocatalytic water oxidation

Jirong Bai,Changfan Chen,Yuebin Lian,Yaoyao Deng,Mei Xiang,Quanfa Zhou,Yawen Tang,Yaqiong Su

DOI: https://doi.org/10.1016/j.jcis.2024.02.093

IF: 9.9

2024-06-01

Journal of Colloid and Interface Science

Abstract:Amorphous engineering and atomistic doping provide an effective way to improve the catalytic activity in the oxygen evolution reaction (OER) of transition metal layered double hydroxides. Herein, Cerium (Ce) was introduced into NiFe-based oxyhydroxide using a modified aqueous sol-gel procedure. Ce as an electron acceptor promoted the coupling oxidation of Ni2+/3+ in NiFe oxyhydroxide, and the activated oxyhydroxide showed excellent catalytic activity in OER. The amorphous NiFeCe oxyhydroxide electrocatalyst demonstrated great modified OER catalytic activity under alkaline conditions and excellent cyclic stability, with an overpotential of only 284 mV at 50 mA cm-2, which was significantly better than amorphous NiFe oxyhydroxide and crystalline NiFeCe oxyhydroxide. Theoretical investigations further indicated that the overpotential of the rate-determining step (*OOH deprotonation) decreased from 0.66 to 0.41 V after Ce doping and strong electron interaction, effectively reducing the dependence of proton activity in the solution of OER, and optimizing the adsorption/desorption process of related oxygen-containing species in the reaction. This work also provides a good reference for optimizing OER activity by using rare-earth-metal induced electronic regulation strategies.

chemistry, physical
Facilitating active species by decorating CeO2 on Ni3S2 nanosheets for efficient water oxidation electrocatalysis

Qian Wu,Qingping Gao,Limei Sun,Huanmei Guo,Xishi Tai,Dan Li,Li Liu,Chongyi Ling,Xuping Sun

DOI: https://doi.org/10.1016/s1872-2067(20)63663-4

IF: 16.5

2021-03-01

Chinese Journal of Catalysis

Abstract:In the pursuit of stable, high performance Ni-based oxygen evolution reaction (OER) electrocatalysts, modifying the local chemical compositions or fabricating hybrid nanostructures to generate abundant interfaces for improving the water oxidation activity of electrocatalysts has emerged as an effective strategy. Herein, we report the facile development of a Ni3S2-CeO2 hybrid nanostructure via an electrodeposition method. Benefiting from the strong interfacial interaction between Ni3S2 and CeO2, the electron transfer is notably improved and the water oxidation activity of Ni3S2 nanosheets is significantly enhanced. In 1.0 M KOH, the Ni3S2-CeO2 electrocatalyst achieves a current density of 20 mA cm–2 at a low overpotential of 264 mV, which is 92 mV lower than that of Ni3S2. Moreover, Ni3S2-CeO2 exhibits superior electrochemical stability. Density functional theory calculations demonstrate that the enhanced OER electrocatalytic performance of Ni3S2-CeO2 can be ascribed to an increase in the binding strength of the reaction intermediates at the Ni3S2-CeO2 interface.

chemistry, physical,engineering, chemical, applied
Ni and CeO 2 Nanoparticles Anchored on Cicada-Wing-like Nitrogen-Doped Porous Carbon as Bifunctional Catalysts for Water Splitting

Lejie Tian,Hui Liu,Beiyi Zhang,Yi Liu,Siye Lv,Lingyan Pang,Junqi Li

DOI: https://doi.org/10.1021/acsanm.1c03850

IF: 6.14

2021-12-16

ACS Applied Nano Materials

Abstract:Slow reaction kinetics, significant overpotential, and high cost remained significant barriers to electrocatalytic water splitting. To address such issues, “cicada-wing-like” nitrogen-doped porous carbon-anchored Ni and CeO2 nanoparticles (CeO2/Ni/NC) were developed and manufactured as a bifunctional catalyst utilizing a modified electrospinning process for overall water splitting. It is worth mentioning that the resulting CeO2/Ni/NC catalyst had excellent oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) catalytic performance, as well as superior alkaline electrolyte durability. Compared with other nitrogen-doped carbon catalysts, in the OER, it revealed with a lower OER overpotential of 390 mV at 10 mA·cm–2 and a smaller value of the Tafel slope (123 mV·dec–1), while in the HER, it showed an overpotential of 320 mV at 10 mA·cm–2 and a Tafel slope of 150 mV·dec–1. The metallic Ni was the main center of excellent catalytic activity, and the abundant oxygen vacancies and outstanding oxidation/reduction capabilities in CeO2 promoted the overall water splitting. Moreover, the porous nanoarchitecture of matrix material well controlled the size of Ni and CeO2, providing a wealth of active sites, facilitating the electron/ion transfer. This work provided ideas for non-metal-doped carbon-supported catalyst particles, and the catalytic material obtained by the cheap and simple preparation method had an ultrathin microscopic appearance like cicada-wing-like and excellent bifunctional catalytic activity.

materials science, multidisciplinary,nanoscience & nanotechnology
Growth of trimetallic CeFeNi-MOF-74 on nickel foam as a bifunctional electrocatalyst for water splitting

Li, Guanghuan

DOI: https://doi.org/10.1007/s11581-024-06010-5

IF: 2.961

2024-12-13

Ionics

Abstract:In order to facilitate the industrial synthesis of hydrogen from electrolytic water on a wide scale, high-performance non-precious metal electrocatalysts that can substitute precious metal electrocatalysts must be developed. This paper reports a trimetallic CeFeNi-MOF-74 electrocatalyst grown on nickel foam (NF) by solvothermal method. The introduction of trimetallics gives the metal–organic framework (MOF) materials synergistic and complementary properties, resulting in better catalytic properties of the materials. Tuning the electronic structure of materials to Optimise electrocatalytic performance by adjusting metal ratio. It was found that the prepared Ce 0.9 FeNi-MOF-74 exhibited excellent electrocatalytic activity and stability in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). In 1 M KOH, the overpotential is only 262 mV for HER at a current density of 100 mA cm −2 and 257 mV for OER at a current density of 100 mA cm −2 . For overall water splitting (OWS), a low voltage of only 1.68 V is required to achieve a 10 mA cm −2 current density. The excellent catalytic performance of Ce 0.9 FeNi-MOF-74 exceeds that of many commercial catalysts. This study provides new insights into the synthesis of high-performance and stable MOF electrocatalysts.

chemistry, physical,physics, condensed matter,electrochemistry

Electronically modulated nickel boron by CeO x doping as a highly efficient electrocatalyst towards overall water splitting

Electronically Modulated Nickel Boron by CeOx Doping As a Highly Efficient Electrocatalyst Towards Overall Water Splitting.

Cerium-Doped Nickel Sulfide Nanospheres as Efficient Catalysts for Overall Water Splitting

Cerium decorated amorphous ternary Ni-Ce-B catalyst for enhanced electrocatalytic water oxidation

Quantum dot-doped CeOx–NiB with modulated electron density as a highly efficient bifunctional electrocatalyst for water splitting

CeO 2 -decorated Fe-doped Ni 2 P nanosheets for efficient electrocatalytic overall water splitting at high current densities

Electronic Regulation of Ce,F-Ni2P/CoP Catalyst for Efficient Water Splitting

Heterogeneous engineering of nickel-iron sulfide with cerium-promoted reconstruction for enhanced oxygen evolution

Facile generation of CeO 2 nanoparticles on multiphased NiS x nanoplatelet arrays as a free-standing electrode for efficient overall water splitting

Electronic modulation of sprout-shaped NiCoP nanoarrays by N and Ce doping for efficient overall water splitting

Ni3N–CeO2 Heterostructure Bifunctional Catalysts for Electrochemical Water Splitting

Cr-doped CoFe2O4 nanorod array modified by oxygen vacancy-rich cerium oxide as an efficient bifunctional total water splitting catalyst

Impact of morphology and oxygen vacancy content in Ni, Fe co-doped ceria for efficient electrocatalyst based water splitting

In Situ Constructing Lamella-Heterostructured Nanoporous CoFe/CoFe2O4 and CeO2−x As Bifunctional Electrocatalyst for High-Current-density Water Splitting

Facile Construction of Heterostructural Ni3(NO3)2(OH)4/CeO2 Bifunctional Catalysts for Boosted Overall Water Splitting

Enhancing Full Water-Splitting Performance of Transition Metal Bifunctional Electrocatalysts in Alkaline Solutions by Tailoring CeO2-Transition Metal Oxides-Ni Nanointerfaces

Facile Synthesis of Co and Ce Dual-Doped Ni3S2 Nanosheets on Ni Foam for Enhanced Oxygen Evolution Reaction

Role of amorphous engineering and cerium doping in NiFe oxyhydroxide for electrocatalytic water oxidation

Facilitating active species by decorating CeO2 on Ni3S2 nanosheets for efficient water oxidation electrocatalysis

Ni and CeO 2 Nanoparticles Anchored on Cicada-Wing-like Nitrogen-Doped Porous Carbon as Bifunctional Catalysts for Water Splitting

Growth of trimetallic CeFeNi-MOF-74 on nickel foam as a bifunctional electrocatalyst for water splitting