Abstract:Direct-to-chip liquid cooling offers significant advantages in managing higher power densities compared to traditional air-cooling methods. This approach utilizes nearly half the power required by server fans and air conditioners, enhances cooling efficiency in data centers. The effectiveness of this cooling strategy is intricately linked to the layout of the cold plate fins. In this research, a density-based topology optimization method is implemented in generating free-forming and non-intuitive fin structures. A pseudo-optimization model, which approximates the 3D heat sink as two 2D thermally coupled problem is selected and optimized with 'pressure drop' and 'average junction temperature' as objective function and constraint, respectively. Several fin layouts with inlet flow velocities and temperature constraints are generated. Three-dimensional numerical simulations reveal that the average junction temperature with the topology-optimized fin pattern is ∼2°C higher, and the pressure drop is significantly lower compared to size-optimized straight channel. Building on this, an inverted topology-optimized design is introduced along the channel length, inspired by the wavy nature of sectional fins. The average junction temperature with the inverted TO design is 3 to 4°C lower compared to the straight design, with a similar pumping power of 0.023 W. The TO fin layout capitalizes on frequent re-initialization of boundary layers, secondary flow-induced mixing, and the formation of Dean vortices along the channel length. Further refinement leads to the derivation of drop-oblique-trapezoidal and oval-shaped (DOTO) fins. These fins reduce average junction and wall temperatures by ∼23% compared to the inverted TO design, owing to the persistent effects of fluid dynamic phenomena along the channel length. Comparison with benchmarked designs indicates that DOTO fins reduce the average junction temperature by 3 to 6°C compared to size-optimized offset strip fins and step fins, with a similar pumping power of 0.083 W. The study indicates that optimizing DOTO fins dimensions can further enhance heat sink performance.

Constructal design for composite heat dissipating structure composed of an "arrow"-shaped high conductivity channel and an externally connected "T"-shaped fin

Constructal Design of an Arrow-Shaped High Thermal Conductivity Channel in a Square Heat Generation Body

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

Efficiency Analysis on Optimal Contour of One Dimensional Fin

Constructal design of three fins inside a lid-driven cavity

Constructal optimization of a rectangular non-uniform heat generation area with irregular high thermal conductivity material

Optimization of Fin Geometry in Heat Convection with Entransy Theory

Performance Analysis and Structural Optimization of a Finned Liquid-Cooling Radiator for Chip Heat Dissipation

Constructal design progress for eight types of heat sinks

Optimal design analysis of a tubular heat exchanger network with extended surfaces using multi-objective constructal optimization

Maximizing liquid-cooled heat sink efficiency with advanced topology-optimized fin designs

Topology optimization and bionic analysis of heat sink fin configuration based on additive manufacturing technology

Design and experimental investigation of topology-optimized fin structures for enhanced heat transfer in latent heat thermal energy storage units

Characteristics analysis and structure optimization of a hybrid micro-jet impingement/micro-channel heat sink

Design optimization of a novel annular fin on a latent heat storage device for building heating

Optimal Design Methodology of Plate-Fin Heat Sinks for Electronic Cooling Using Entropy Generation Strategy

Study on the performance of a miniscale channel heat sink with Y-shaped unit channels based on entransy analysis

Enhancement mechanism on heat and mass transfer of tall fin with cycloid thermosyphon loop

Constructal Enhancement of Heat Conduction with Phase Change

Numerical Investigation of Heat Transfer Performance and Structural Optimization of Fan-Shaped Finned Tube Heat Exchanger

Experimental and numerical investigation on the heat transfer enhancement for Mini-channel heat sinks with tessellated fins