Abstract:The magnesium reduction process occurring in a retort as described in Part I is carried out in a refractory brick coal-fired furnace. It is considered that the thermal-flow inside the furnace has an important effect on the heat transfer and reduction of the reactive compound in the retort. In this paper, a comprehensive two-dimensional unsteady model was developed in combination of the magnesium reduction model put forward in Part I with the conventional gas-particle turbulent flow and combustion models. The set of equations was solved by the time-marching method. The prediction revealed the flow characteristics and temperature distribution in the furnace, and the magnesium reduction rate distribution in the retort. Variation of the total magnesium reduction rate with the time was also presented, which is useful for the design and operation of the magnesium reduction system. NOMENCLATURE cp Effective specific heat capacity of the reactant Cp Coal particle specific heat capacity Fd Drag force Fg Gravitational force mp Coal particle mass Qc Convective heat transfer between particle and gas phase Qm Coal combustion heat Qr Radiative heat transfer between particle and gas phase Sr Reaction source term Sφ Source term in Eq. (4) Sφp Source term representing the interaction between coal particle and gas phase in Eq. (4) Tp Coal particle mass up Coal particle velocity u Gas velocity ρ Effective density λ Effective thermal conductivity φ Universal variable in Eq. (4) Γφ Generalize diffusion coefficient in Eq. (4) INTRODUCTION The magnesium production process is carried out in a traditional coal-fired furnace, as shown in Figure 1 (Xu, 2003). Several retorts(5~11) are horizontally placed in the upper and lower rows with a staggered layout in the refractory brick furnace, which are heated by high temperature flue gas(1200~1250°C) from the combustion chamber arranged symmetrically on two sides of the furnace. The magnesium reduction process occurs in the retort. The high temperature flue gas flows out via the outlets at the bottom of the furnace to preheat the inlet air. Figure 1: Cross-section schematic diagram of coal-fired furnace for magnesium production In Part I (Li et al., 2009), we established the magnesium reduction model in the retort according to the actual physical process, and analyzed in detail the behavior of performance of the magnesium reduction process, such as temperature distribution, magnesium reduction rate and heat absorption power, with the time. The influence of heating temperature on the magnesium reduction rate and the heat absorption power was also investigated. However, the heat transfer occurred on the surface of the retort placed in the furnace involves not only the heat conduction but also the convective and radiative heat transfer. Therefore, the objective of this paper is to develop a comprehensive unsteady model in combination with the magnesium reduction model put forward in Part I and with the conventional coal combustion models, and to investigate the effect of thermal-flow field on the performance of the magnesium reduction process in terms of temperature and reduction rate profiles in the retort, and the variation of total reduction rate with the time.

Numerical simulation of complex thermal decomposition processes in pyrolysis furnace for recycling solid waste Mg(NO3)2.2H2O

Parameters effect and optimization on calciner for treating magnesium salt based on computational fluid dynamics

Computational Fluid Dynamics Modeling of Rapid Pyrolysis of Solid Waste Magnesium Nitrate Hydrate under Different Injection Methods

Mathematical Model for Mass and Heat Transfer in Multilevel Reactor for Pyrolysis of Used Tyres

Optimization of a pyrolysis furnace using multi-jet arrays through numerical and machine learning techniques

Study on the thermal decomposition mechanism of Mg(NO3)2·6H2O from the perspective of resource utilization of magnesium slag

Numerical Evaluation and Parameter Optimization of Bischofite Pyrolysis: A New Approach to Solid Waste Treatment

Optimization of pyrolysis for MgO recycling in magnesia-based flue gas desulfurization

Numerical Study of Bischofite Precursor Droplet Evaporation and Thermal Decomposition for Spray Pyrolysis Systems

Numerical simulation of O2/CO2 combustion in decomposition furnace

The Co-Processing Combustion Characteristics of Municipal Sludge within an Industrial Cement Decomposition Furnace via Computational Fluid Dynamics

Numerical investigation on the heat transfer of plastic waste pyrolysis in a rotary furnace

Numerical Simulation Of De-Nox By Reburning Of Waste Tire Pyrolysis Gases

CFD–DEM Simulation of Heat Transfer and Reaction Characteristics of Pyrolysis Process of MSW Heated by High-Temperature Flue Gas

CFD-DEM simulations of municipal solid waste gasification in a pilot-scale direct-melting furnace

Exergy Analysis and Modeling of Pilot-Scale Pyrolysis for Magnesium Oxide Preparation from Salt Lake Bischofite Industrial Waste

Pyrolysis Characteristics and Stage Division of Red Mud Waste from the Alumina Refining Process for Cyclic Utilization

Effect of Swirling Gas Inlet Design on Particle Motion and Decomposition in Magnesite Flash Calciner

Numerical simulation of magnesium production by the pidgeon process part ii : coupling of the magnesium reduction in the retorts with the surrounding thermal-flow fields in a coal-fired furnace

TG-FTIR and Py-GC/MS combined with kinetic model to study the pyrolysis characteristics of electrolytic manganese residue

Process Design and Simulation Analysis of Plasma Furnace Disposal of Solid Waste