Abstract:Abstract Matrix acidizing is a means to stimulate wells; in order to increase the productivity or injectivity. Amongst the wide acidizing fluids, emulsified acids are the most commonly used. Emulsified acids have a reputation to retard the reaction with formation rock, hence they cause deeper penetration. Apart from that, they need minimum additives, since acid is encapsulated by oil phase. That being said, only the oil phase is in immediate contact with the tubing. Thus, granting less corrosion issues. All of these perks of emulsified acids are based on the mere condition that they are stable during their journey in the well to reach the formation rock. Therefore, a stable emulsion (emulsified acid) is extremely critical to the acidizing job, and the degree to which it is stable dictates how successful the job will be. This work aims to experimentally study the factors which contribute to create a stable emulsion by conducting thermal stability and rheology tests. These factors include mixing means (magnetic stirrer & high-power mixer), emulsifier concentration (up to 1.5vol%), mixing speed (up to 1500 rpm), addition rate of acid phase to diesel one (separatory funnel & syringe pump). Moreover, the emulsified acid is prepared using 15wt% HCl and diesel. The volume ratio of acid-to-diesel is 70:30. And, all of the thermal stability tests are conducted at 120°C in a heating oven. Furthermore, the apparent viscosity is measured at different temperatures and supported by droplet size distribution. The results show that emulsifier concentration and mixing speed have significant effect when the emulsion is prepared using magnetic stirrer; however, this effect diminishes when the mixing means is a high-power mixer. Interestingly, the addition rate plays a key role on the stability; even a small difference as 0.5 mL/minute would result in changing the behavior of the emulsion at 120°C. Also, the results confirm that the smaller the droplet size of an emulsion, the more viscous it becomes. Furthermore, temperature increase results in emulsion degradation. This study offers a unique way to look at emulsified acids and addresses factors that have never been addressed before. The novelty of this study is the comprehensive knowledge it brings about the factors affecting the stability of HCl emulsion. It helps to better understand HCl emulsion and how it works. Hence, production engineers can design and conduct acidizing jobs seamlessly.

Viscoelastic Properties of Novel Emulsified Acid Using Waste Oil: Effect of Emulsifier Concentration, Mixing Speed and Temperature

Formulating a Stable Emulsified Acid at High Temperatures: Stability and Rheology Study

Application of rhamnolipid as a novel biodemulsifier for destabilizing waste crude oil.

A Unique Emulsified Acid System with Three Intensifiers for Stimulation of Very High Temperature Carbonate Reservoirs

A robust viscoelastic surfactant tolerating 20% HCl up to 150 °C for oil well stimulation

Effect of chemicals on the phase and viscosity behavior of water in oil emulsions

Synergistic emulsification of polyetheramine/nanofluid system as a novel viscosity reducer of acidic crude oil

Influence of Surfactant Structure on the Stability of Water-in-Oil Emulsions under High-Temperature High-Salinity Conditions

Experimental Study on Water-in-Heavy-Oil Droplets Stability and Viscosity Variations in the Dilution Process of Water-in-Heavy-Oil Emulsions by Light Crude Oil

Performance evaluation of microemulsion acid for integrated acid fracturing in Middle Eastern carbonate reservoirs

Quantification of Various Factors Affecting Emulsion Stability: Watercut, Temperature, Shear, Asphaltene Content, Demulsifier Dosage and Mixing Different Crudes

Behavior of Emulsification and Thickening of Crude Oil in Mixed Cationic and Anionic Surfactant Systems

Preparation and performance evaluation of oil-tolerant and easy-wetting viscoelastic system for enhancing the stability of highly viscous oil-water lubricated flow

The Studies and Application of Acidification Technology of High Temperature Emulsified Acids.

Rag Layer Formation and Stability of Crude Oil Emulsion Under Different Imposed Mechanical Energy and Temperatures

Effect of Oil Saturation on the Flow of Emulsified Acids in Carbonate Rocks

Study on the indigenous stabilization mechanism of light crude oil emulsions based on an in situ solvent-dissolution visualization method

An experimental investigation of liquid CO2-in-water emulsions for improving oil recovery

A molecular study of viscosity-causing mechanism and viscosity reduction through re-emulsification for Jimsar shale oil

Mechanism of High Stability of Water-in-Oil Emulsions at High Temperature