Abstract:For ensuring the safe and stable operation of waxy crude oil pipeline transportation, in this research, the molecular dynamics model was established to characterize the deposition and wall sticking behavior of waxy crude oil multiphase system pipeline transportation. The equal density interpolation fitting method was proposed to determine the wall contact angle of simulation results. Through verification, the error between the simulation results and the experimental results measured by Dos Santos et al. (2006) was less than 5%, which showed that the established model was accurate and reliable. Using the established model, the deposition and wall sticking behavior of waxy crude oil nucleated clusters was simulated. It was found that the nucleated clusters would first adhere to the wall surface to form the solidified oil layer. Then, the wax and asphaltene molecules would diffuse to the deposit layer, and the oil molecules in the solidified oil layer reverse diffused to the direction of the oil flow. With the adhering and spreading degree of clusters on the wall surface increasing, the deposit layer gradually aged, and the gelled deposit layer with a higher density and hardness would form. On this basis, the micro influence mechanism of the surface free energy was studied. It was found that the higher the surface free energy, the more hydrophilic the pipeline wall was, and the higher the adhesion degree would be. Moreover, based on the ABF sampling and the potential of mean force calculations, the selective deposition process of waxy crude oil deposited on the sedimentary layer was studied. The micro information on the deposition sites, the binding conformation, and the binding energy of different molecules in clusters deposited on different molecules in sedimentary layer were analyzed. The investigations in this study could provide theoretical support for paraffin removal and control, which could ensure the safe and stable operation of the waxy crude oil production system.This article has not yet been cited by other publications.

Preparation and performance evaluation of oil-tolerant and easy-wetting viscoelastic system for enhancing the stability of highly viscous oil-water lubricated flow

Research and performance evaluation of CO2 solubilization synergist for heavy oil

Viscosity Modification of Lubricating Oil Based on High-Concentration Silica Nanoparticle Colloidal System

Rheological Behavior of Heavy Crude Oil and Its Emulsions

The Simulation of Ester Lubricants and Their Application in Weak Gel Drilling Fluids

Viscous fingering analysis for water-drive oil in the inclined plane

Formulation and evaluation of a new multi-functional fracturing fluid system with oil viscosity reduction, rock wettability alteration and interfacial modification

Synergistic emulsification of polyetheramine/nanofluid system as a novel viscosity reducer of acidic crude oil

Preparation and Application of Viscosifier for Environmentally Friendly Oil-Based Drilling Fluid

One-Step Process of Mixed Oleic Acid Esters and Its High Temperature Lubrication Properties in Bentonite Gelling Suspension

Performance Evaluation of the Multifunctional Variable-Viscosity Slick Water for Fracturing in Unconventional Reservoirs

Molecular Dynamics Simulation of Waxy Crude Oil Multiphase System Depositing and Sticking on Pipeline Inner Walls and the Micro Influence Mechanism of Surface Physical–Chemical Characteristics

Mechanism of High Stability of Water-in-Oil Emulsions at High Temperature

Optimizing the low‐temperature performance of high‐wax‐content crude oil with emulsion‐based wax inhibitors: Mechanisms and efficacy

Simulation-based research on enhancing lubricity: investigating wettability and textured surfaces in alkane lubricants under boundary lubrication conditions

Behavior of Emulsification and Thickening of Crude Oil in Mixed Cationic and Anionic Surfactant Systems

Performance evaluation of oil-displacement viscoelastic zwitterionic surfactant fracturing fluid

The Influencing Factors and Mechanism of Anionic and Zwitterionic Surfactant on Viscosity Reduction in Heavy O/W Emulsions

Phase transition characteristics of heavy oil-viscosity reducer-water emulsion systems

Effective viscosity prediction of crude oil-water mixtures with high water fraction

Oil-Water Two-Phase Flow with Three Different Crude Oils: Flow Structure, Droplet Size and Viscosity