Abstract:Assisted wet deposition methods to localize the active phase metal on the carrier surface and prevent atomic aggregation during conventional heat treatment are strongly preferred. Herein, single-atom cobalt catalysts (SA-Co-PCN) with different metal-central content were target-prepared using a combination of impregnation and secondary annealing on polymerized carbon nitride (PCN) through reticular confinement. Fitting the coordination configuration of the Co-N pathway within the first coordination shell according to quantitative EXAFS indicated that the ligancy of Co-N was 4. The removal efficiency of representative micropollutants in the SA-Co-PCN/PMS system achieved 100% within 15 min. The outstanding degradation properties of micropollutants were ascribed to the SA-Co-PCN boosts PMS to a 1 O 2 -dominated system. Moreover, the effects of substituents on the degradation behavior and ecotoxicology of sulfonamides (SAs) in PMS-activated systems were investigated in depth. The combination of DFT theoretical calculations and LC-MS further confirmed that the similar electron-rich sites on the SAs molecules allowed for commonality in the degradation pathway. Both S-N bond and C-S bond fragments became the initial attack and cleavage sites in the series of SAs. Ecotoxicity predictions indicated that most intermediates of SAs exhibited lower acute and chronic toxicity, especially acute toxicity, than the parent compounds. Environmental Implication Assisted wet deposition to localize the active phase metal on the carrier surface allows easy target formation of single-atom cobalt catalysts (SA-Co-PCN), which could boost PMS to a 1 O 2 -dominated system for efficient oxidation of typical micropollutants. The degradation behavior and ecotoxicology of sulfonamides in the SA-Co-PCN/PMS system were investigated in depth, revealing that most intermediates of sulfonamides exhibited lower acute and chronic toxicity, especially acute toxicity, than the parent compounds. This work provides a strategy for the development of facilely prepared single-atom catalysts and contributes to the development and application potential of PMS advanced oxidation technology for water pollution control.

Nanosized Co-Fe spinel quantum dots anchored on activated carbon for enhanced VOCs mineralization via PMS-based AOPs coupled with wet scrubber

Deep mineralization of VOCs in an embedded hybrid structure CoFe2O4/MoS2/PMS wet scrubber system

Activation of Peroxymonosulfate by CoS2 Loaded Air-Laid Cloth for Rapid Degradation of Organic Pollutants in a Shallow Continuous Flow Reactor

Boosting the activation of Peroxymonosulfate and the degradation of metronidazole over FeCo2O4 quantum dots anchored on β-FeOOH Nanosheets: Inspired from octahedral Co(II) with missing angle

Paint sludge derived activated carbon encapsulating with cobalt nanoparticles for non-radical activation of peroxymonosulfate

Spatial confined synthesis of submicron Fe-MoS2 with abundant surface cationic groups and sulfur vacancies for enhanced peroxymonosulfate activation

Highly dispersed CoFe2O4 spinel on biomass-derived 3D porous carbon framework for much enhanced Fenton-like reactions

Heterogeneous activation of peroxymonosulfate over monodispersed Co3O4/activated carbon for efficient degradation of gaseous toluene

Accelerated iron cycle inducing molecular oxygen activation for deep oxidation of aromatic VOCs in MoS2 co-catalytic Fe3+/PMS system

Assisted wet deposition targeted synthesis of Co-N coordination single-atom catalysts for efficient Fenton-like catalytic degradation of micropollutants

A New Insight into the Mechanism in Fe3O4@CuO/PMS System with Low Oxidant Dosage

MOF Derived Co−Fe nitrogen doped graphite carbon@crosslinked magnetic chitosan Micro−nanoreactor for environmental applications: Synergy enhancement effect of adsorption−PMS activation

Overcoming metals redox rate limitations in spinel oxide-driven Fenton-like reactions via synergistic heteroatom doping and carbon anchoring for efficient micropollutant removal

Nano-confined catalysis with Co nanoparticles-encapsulated carbon nanotubes for enhanced peroxymonosulfate oxidation in secondary effluent treatment: Water quality improvement and membrane fouling alleviation

Surface sulfur vacancies enhanced electron transfer over Co-ZnS quantum dots for efficient degradation of plasticizer micropollutants by peroxymonosulfate activation

A Highly Dispersed Co–Fe Bimetallic Catalyst to Activate Peroxymonosulfate for VOC Degradation in a Wet Scrubber

Controllable fabrication of Co-CoO architecture: morphology, defects and metal components toward efficient degradation of organic pollutants

Wet Scrubber Coupled with Heterogeneous UV/Fenton for Enhanced VOCs Oxidation over Fe/ZSM-5 Catalyst

Tuning local electronic configuration of single atomic Co catalyst via oxide toward boosting Fenton-like activity for pollutant degradation

In-situ Construction of Mesoporous CuCo2O4 Decorated CNTs Networks As a Long-Lasting Peroxymonosulfate Activator for Rapid Removal of Aqueous Micropollutants

Compositing ultrafine CoFe 2 O 4 spinel with porous silica as catalyst for photothermal PMS activation and interfacial water evaporation