Abstract:A novel series of sulfonated poly(ether ether ketone ketone)s (SPEEKKs) with different degrees of sulfonation (Ds) were synthesized from 1,3-bis(3-sodium sulfonate-4-fluorobenzoyl)benzene (1,3-SFBB-Na), 1,3-bis(4-fluorobenzoyl)benzene (1,3-FBB) and 3,3′,5,5′-tetramethyl-4,4′-biphenol (TMBP) by aromatic nucleophilic polycondensation. The chemical structures of SPEEKKs were confirmed by FT-IR spectroscopy and the Ds values of the polymers were calculated by 1H NMR and titration methods, respectively. The thermal stabilities of the SPEEKKs in acid and sodium forms were characterized by thermogravimetric analysis (TGA), which showed that SPEEKKs had excellent thermal properties at high temperatures. All the SPEEKK polymers were easily solution cast into tough membranes. Water uptakes, proton conductivities and methanol diffusion coefficients of the SPEEKK membranes were measured. Water uptake increased with Ds and temperature. Compared to Nafion, the SPEEKK-60, -70 and -80 membranes showed higher proton conductivities at 80°C, while the other SPEEKK membranes showed relatively lower proton conductivities. This may be due to the different distribution of ion-conducting domains in membrane. However, these membranes showed lower methanol diffusions in the range of 8.32×10−9 to 1.14×10−7cm2s−1 compared with that of Nafion (2×10−6cm2s−1) at the same temperature. The membranes also showed excellent mechanical properties (with a Young's modulus>1GPa and a tensile strength>40MPa). These results indicate that the SPEEKK membranes are promising materials for use in direct methanol fuel cell (DMFC) applications.

Random sulfonated poly(arylene ether sulfone) and sulfonated poly(arylene ether ketone) membranes for fuel cell applications

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

Fluorenyl-containing sulfonated poly(aryl ether ether ketone ketone)s (SPFEEKK) for fuel cell applications

Covalently and ionically crosslinked sulfonated poly(arylene ether ketone)s as proton exchange membranes

Facile Fabrication and Characterization of Improved Proton Conducting Sulfonated Poly(Arylene Biphenylether Sulfone) Blocks Containing Fluorinated Hydrophobic Units for Proton Exchange Membrane Fuel Cell Applications

Comb-shaped sulfonated poly(aryl ether sulfone) proton exchange membrane for fuel cell applications

Novel side-chain-type sulfonated poly(arylene ether ketone) with pendant sulfoalkyl groups for direct methanol fuel cells

Advanced proton exchange membrane prepared from N-heterocyclic poly(aryl ether ketone)s with pendant benzenesulfonic moieties and performing enhanced radical tolerance and fuel cell properties

Sulfonamide-Sulfonimide Copolymers as Novel, Fluorine-Lean Type of Proton Exchange Membranes for Fuel Cell Application

Hybrid acid–base polymer membranes prepared for application in fuel cells

Membranes from sulfonated block copolymer for use in proton exchange membrane fuel cells

Novel Sulfonated Poly(ether Ether Ketone Ketone)s for Direct Methanol Fuel Cells Usage: Synthesis, Water Uptake, Methanol Diffusion Coefficient and Proton Conductivity

Novel sulfonated N-heterocyclic poly(aryl ether ketone ketone)s with pendant phenyl groups for proton exchange membrane performing enhanced oxidative stability and excellent fuel cell properties

Block Sulfonated Poly(Arylene Ether Ketone) Containing Flexible Side-Chain Groups for Direct Methanol Fuel Cells Usage

High proton-conducting polymer electrolytes based on pendent poly(arylene ether ketone) with H-bond for proton exchange membranes

Homopolymer-like sulfonated phenyl- and diphenyl-poly(arylene ether ketone)s for fuel cell applications

High conductive and dimensional stability proton exchange membranes with an all-carbon main chain and densely sulfonated structure

4-Aminopyridine grafted sulfonated poly(arylene ether ketone sulfone) proton exchange membrane with high relative selectivity for fuel cells

Preparation and properties of epoxy-based cross-linked sulfonated poly(arylene ether ketone) proton exchange membrane for direct methanol fuel cell applications