Abstract:Nickel-rich layered oxide cathode materials having a Ni content of ≥90% have great potential for use in next-generation lithium-ion batteries (LIBs) due to their high energy densities and relatively low cost. They suffer, however, from poor cycling performance and rate capability, significantly hampering their widespread applicability. In this study, we synthesized a Ni-rich precursor through a co-precipitation method and added different amounts of the Li excess on the precursors using a solid-state method to obtain sintered Li1+x (Ni0.9Co0.05Mn0.05)1–x O2 (denoted as L1+x -NCM; x = 0.00, 0.02, 0.04, 0.06, and 0.08) transition metal (TM) oxide cathode materials. The L1+x -NCM cathode having a Li excess of 4% exhibited a discharge capacity of ca. 216.17 mA h g–1 at 2.7–4.3 V, 0.1 C and retained 95.7% of its initial discharge capacity (ca. 181.39 mA h g–1) after 100 cycles of 1 C charge/discharge which is the best performance as compared with stoichiometric Li1+x (Ni0.9Co0.05Mn0.05)1–x O2 (i.e., x = 0, Li/TM = 1:1). Furthermore, a high-rate capability of ca. 162.92 mA h g–1 at a rate of 10 C led to the 4% Li excess, optimizing the electrochemical performance, relative to the other Li-excess samples. Ex/in situ X-ray diffraction, scanning electron microscopy, and X-ray photoelectron spectroscopy revealed that the 4% Li excess in the Ni-rich NCM90 cathode material (i) decreased the Li+/Ni2+ disorder by increasing the content of Ni3+ in the TM slab, (ii) increased the crystallinity, and (iii) accelerated Li+-ion transport by widening the Li slab. Furthermore, electrochemical impedance spectroscopy and cyclic voltammetry confirmed that the appropriate Li excess lowered the electrochemical impedance and improved the reversibility of the electrochemical reaction. Therefore, our results revealed that NCM90 cathode materials featuring an optimal Li excess are potential candidates for use in next-generation LIBs.

Improved electrochemical performance of Li-excessive LiMn2O4 cathode for secondary batteries

Lithium-Excess Research of Cathode Material Li2MnTiO4 for Lithium-Ion Batteries

Structure and electrochemical properties of LiMgxMn2-xO4 cathode materials for Li-ion batteries

Enhanced Stability of Vanadium-Doped Li1.2Ni0.16Co0.08Mn0.56O2 Cathode Materials for Superior Li-ion Batteries

Synthetic Optimization and Electrochemical Properties of LiNi_(0.5)Mn_(0.5)O_2 Cathode Materials for Lithium-ion Batteries

Improving rate capacity and cycling performance of lithium-rich high-Mn Li-1.8[Mn0.7Co0.15Ni0.15]O-2.675 cathode materials by Li2SiO3 coating

Synthesis and Electrochemical Properties of Li[Mn1/3-x/3 Ni1/3-x/3 Co1/3-x/3 Crx ]O2 As Cathode Materials for Lithium-ion Secondary Batteries

Enhanced Cycling Performance of Spinel LiNi0.5Mn1.5O4 Cathodes through Mg-Mn Hetero-Valent Doping via Microwave Sol-Gel Method

Effect of Li Excess on Electrochemical Performance of Ni-Rich LiNi 0.9 Co 0.05 Mn 0.05 O 2 Cathode Materials for Li-Ion Batteries

Bulk and surface reconstructed Li-rich Mn-based cathode material for lithium ion batteries with eliminating irreversible capacity loss

Understanding the Enhanced Electrochemical Performance of Samarium Substituted Li[Li0.2Mn0.54 − Xsmxco0.13ni0.13]o2 Cathode Material for Lithium Ion Batteries

Enhanced Electrochemical Performance of 0 . 4 Li 2 MnO 3-0 . 6

Preparation and Characterization of M(II) and M(IV) Iso-Molar Co-Doped Li Mn_(1.9)Mg_(0.05)Ti_(0.05)O_4 Cathode Materials for Lithium-Ion Batteries

Improving electrochemical performance of Li-rich cathode materials via adjusting the components

High-Performance Li(Li0.18Ni0.15Co0.15Mn0.52)O2@Li4M5O12 Heterostructured Cathode Material Coated with a Lithium Borate Oxide Glass Layer

Structural and electrochemical characterization of LiMn2-2xLixNixO4 (0 <= x <= 0.1) cathode materials

Physical Properties and Electrochemical Performance of LiNi X Mn 2-X O 4 Cathode Materials Prepared Using a Precipitation Method

The effect of lithium-excess on Ni-rich LiNi0.6Co0.2Mn0.2O2 cathode materials prepared by a Taylor flow reactor

Correlating Cycle Performance Improvement and Structural Alleviation in LiMn2-xMxO4 Spinel Cathode Materials: A Systematic Study on the Effects of Metal-Ion Doping

Preparation and Characterization of Li1.167-K Mn0.583Ni0·25O2 (x=0, 0.025, 0.05 and 0.075) As Cathode Materials for Highly Reversible Lithium-Ion Batteries

Elucidating the Role of Excess Li in the Electrochemical Performance of Li1+x[Ni0.5Mn0.5](1-x)O-2 Layered Oxides