Abstract:The regeneration of assimilable organic carbon (AOC) during chlorinated disinfection in drinking water treatment poses serious risks to human health. However, conventional ozonation processes in drinking water treatment plants cannot effectively solve this problem. In this study, Mn-based heterogeneous catalytic ozonation, namely the O3/Mn@CMs process, was employed to overcome this bottleneck. The O3/Mn@CMs process exhibited much better elimination performance for AOC precursors than the O3 process. The removal rate of AOC precursors reached approximately 80 % during the O3/Mn@CMs process at an ozone dosage of 5 mg/L and a retention time of 5 min. Two fluorescence components, tyrosine-like components and terrestrial-based humic acids, were identified as the main components of the AOC precursors and were effectively removed by over 50 % during the O3/Mn@CMs process. Moreover, the O3/Mn@CMs process could more significantly enhance the saturation of dissolved organic matter than the O3 process but exhibited a limited effect on the redox states. The O3/Mn@CMs process effectively enhanced the removal of N- and S-containing compounds with CHON compounds (46.49 %) as the dominant precursors, while CHO compounds were the main precursors (62.09 %) in the O3 process. Oxygen addition reactions were the major reaction pathways occurring in both the O3 and O3/Mn @CM processes. In most cases, compared to the O3 process, the O3/Mn@CMs process could more thoroughly oxidize DOM, especially N- and S-containing compounds, into more products via more diverse reaction pathways. This work provides a deep molecular insight into the water purification mechanism of enhanced heterogeneous catalytic ozonation and would be beneficial for the optimization of ozonation-related processes for advanced drinking water treatment.

Process optimization and mechanism revealing of KMnO 4 pre-oxidation coupled powdered activated carbon adsorption for 2-MIB removal

Adsorption characteristics of taste and odor compounds IPMP and IBMP by powder activated carbon in aqueous system

Removal of Micropollutants and Cyanobacteria from Drinking Water Using KMnO4 Pre-Oxidation Coupled with Bioaugmentation.

Unraveling Dissolved Organic Matter in Drinking Water Through Integrated Ozonation/ceramic Membrane and Biological Activated Carbon Process Using FT-ICR MS.

Kinetics of cell inactivation, toxin release, and degradation during permanganation of Microcystis aeruginosa.

Comparison of four pre-oxidants coupled powdered activated carbon adsorption for odor compounds and algae removal: Kinetics, process optimization, and formation of disinfection byproducts

Effect of Peroxymonosulfate Oxidation Activated by Powdered Activated Carbon for Mitigating Ultrafiltration Membrane Fouling Caused by Different Natural Organic Matter Fractions.

Optimization of pre-oxidation enhanced coagulation for micro-polluted water treatment by response surface method

Molecular Insights into Mn-based Heterogeneous Catalytic Ozonation for Enhanced Removal of AOC Precursors in Drinking Water

TiO2-Powdered Activated Carbon (TiO2/PAC) for Removal and Photocatalytic Properties of 2-Methylisoborneol (2-MIB) in Water

Ozone Pre-Oxidation to Accelerate the Ripening of Manganese Oxides Filter for Efficient Manganese Removal from Drinking Water

Sequential combination of pre-chlorination and powdered activated carbon adsorption on iodine removal and I-THMs control in drinking water

Impact of permanganate with polyaluminium chloride on algae-laden karst water: Behaviors and disinfection by-products control

Powdered activated carbon coupled with enhanced coagulation for natural organic matter removal and disinfection by-product control: application in a Western Australian water treatment plant

The adsorption of biogenetic odorants onto activated carbon: Adsorption characteristics and impacts of algal organic matter

Different drinking water production schemes to treat authentic algae-laden source water: Removal of 2-methylisoborneol in different forms

Effect of Hydrous Manganese Dioxide on the Treatment of Low-Turbidity Source Water: Plant-Scale Experience

Combining KMnO4 Pre-Oxidation and Bioaugmented Sand Filtration to Simultaneously Treat Cyanobacterial Bloom Lake Water and Released Mn(II)

Removal of Natural Organic Matter for Controlling Disinfection By-Products Formation by Enhanced Coagulation: A Case Study

The role of PAC adsorption-catalytic oxidation in the ultrafiltration performance for treating natural water: Efficiency improvement, fouling mitigation and mechanisms

Enhancing the Adsorption Performance of 2-Methylisoborneol by Activated Carbon by Promoting Hydrophobic Effects