Abstract:With the spread of COVID-19, disposable medical masks (DMMs) have become a significant source of new hazardous solid waste. Their proper disposal is not only beneficial to the safety of biological systems but also useful to achieve considerable economic value. The first step of this study was to investigate the chemical composition of DMMs. It is primarily composed of polypropylene, polyethylene terephthalate and iron, with fibrous polypropylene accounting for approximately 80% of the total weight. Then, DMMs were sulfonated and oxidised by the microwave-driven concentrated sulfuric acid within 8 min based on the fact that the concentrated sulfuric acid exhibits a good microwave absorption capacity. The co-doping of sulfur and oxygen was achieved while improving the thermal stability of DMMs. Subsequently, the self-activation pyrolysis of sulfonated and oxidised DMMs (P-SO@DMMs) was further realized in low-flow-rate argon. The specific surface area of P-SO@DMMs increased from 2.0 to 830.9 m2·g-1. P-SO@DMMs sulfur cathodes have promising electrochemical properties because of their porous structures and the synergistic effect of sulfur and oxygen co-doping. The capacity of the samples irradiated by microwave for 10 min at 0.1, 0.2, 0.5, 1, 2 and 5 C were 1313.6, 1010.9, 816.5, 634.4, 513.4 and 453.1 mAh·g-1, respectively, and after returning to 0.2 C and continuing the cycle for 50 revolutions, maintained 50.5% of the initial capacity. After 400 cycles, its capacity is 38.1% of the initial capacity at 0.5 C. It is slightly higher than the electrochemical performance of the sample treated by microwave for 8 min and significantly higher than the sample treated by 6 min. This work converts structurally complex, biohazardous DMMs into porous carbon with high specific surface area by clean and efficient microwave solvothermal and self-activating pyrolysis, which facilitates the development of carbon based materials at low cost and large scale.

Nickel-Ion Activating Discarded COVID-19 Medical Surgical Masks for Forming Carbon–Nickel Composite Nanowires and Using as a High-Performance Lithium Battery Anode

Recycling spent masks to fabricate flexible hard carbon anode toward advanced sodium energy storage

Synthesis of the Cathode and Anode Materials from Discarded Surgical Masks for High-Performance Asymmetric Supercapacitors

A green and high-yield route to recycle waste masks into CNTs/Ni hybrids via catalytic carbonization and their application for superior microwave absorption

A high-performance nano-Sn/G@C composite anode prepared by waste carbon residue from spent Lithium-ion batteries

Recycling respirator masks to a high-value product: From COVID-19 prevention to highly efficient battery separator

Mass Production of Metallic Fe@Carbon Nanoparticles with Plastic and Rusty Wastes for High-Capacity Anodes of Ni–Fe Batteries

Porous carbon materials derived from discarded COVID-19 masks via microwave solvothermal method for lithium‐sulfur batteries

Biomass Waste Inspired Nitrogen-Doped Porous Carbon Materials As High-Performance Anode for Lithium-Ion Batteries

The Recovery of the Waste Cigarette Butts for N-Doped Carbon Anode in Lithium Ion Battery

Self-activated pyrolytic synthesis of S, N and O co-doped porous carbon derived from discarded COVID-19 masks for lithium sulfur batteries

Smart Colloid-Assisted Technique Prompts the Evolution of Bamboo Wastes into Nanometal-Inlaid Carbon Microfibers for Sustainable Ni–Fe Batteries

Waste Utilization Method for Δ-Mno2 Anode Composited with MWCNT and Graphene by Embedding on Conductive Paper for Lithium-Ion Battery

Waste-loofah-derived Carbon Micro/nanoparticles for Lithium Ion Battery Anode

Mn3O4/CNT Nanocomposites Derived from Waste Manganese Resources As High Performance Anode Materials for Lithium Ion Batteries

Multi‐Scale Nanoarchitectured Fibrous Networks for High‐Performance, Self‐Sterilization, and Recyclable Face Masks

Microbial-derived functional carbon decorated hollow NiCo-LDHs nanoflowers as a highly efficient catalyst for Li-CO2 battery

Engineering Hierarchical Co@N-Doped Carbon Nanotubes/α-Ni(OH)2 Heterostructures on Carbon Cloth Enabling High-Performance Aqueous Nickel-Zinc Batteries

Electrochemically Activated Nickel-Carbon Composite As Ultrastable Cathodes for Rechargeable Nickel-Zinc Batteries

Reuse of Ni-Co-Mn Oxides from Spent Li-ion Batteries to Prepare Bifunctional Air Electrodes

Recycling silicon-based industrial waste as sustainable sources of Si/SiO2 composites for high-performance Li-ion battery anodes