Abstract:In this paper, the performance of a high-pressure grouting material and consolidation body, the key parameters of tunnel surrounding rock reinforcement, and the field reinforcement effect are compared and studied. The results show that 1) the compressive strength, elastic modulus, and seepage resistance of the consolidation body are related to the water–cement ratio. The permeability of the consolidation body increases with increasing water–cement ratio under the constant head; under the condition of a certain water–cement ratio, the strength increases with an increase in cement content. To meet the construction requirements and the slurry stability, a small water–cement ratio is appropriate. 2) Slurry pressure, rotary spray speed, and lifting speed on the single pile static load bearing capacity have a significant impact. Under the same static load conditions, the greater the slurry pressure, the lower the cumulative settlement value of the single pile, the cumulative settlement value increases less, and the amount of change in rebound is the same; with the increase in the rotational speed of the rotary spray, the lower the cumulative settlement value of the single pile, and the rate of change of the cumulative settlement value of the single pile decreases; and with the increase in the lifting speed, the cumulative settlement value of the single pile increases and the rate of change of the cumulative settlement value decreases. 3) The pile body cement soil is more uniform, has high strength, and is brittle, and the stratum where the slurry part is located is a loose powder clay layer and sandy layer. 4) After high-pressure jet grouting pile reinforcement, the top surrounding rock is more stable after the excavation of an ultra-shallow buried tunnel, the fissures between the surrounding rocks are filled with cement soil consolidation, and the integrity is improved. Certain piles also play a certain role in stopping water; high-pressure jet grouting pile reinforcement to improve the integrity of the surrounding rock played a role in consolidating the weak soil layer above the tunnel vault, creating conditions for the safe excavation of the shallow buried section of the tunnel.

A minimally invasive method for reinforcing the karez tunnel in Turpan based on the high mole ratio potassium silicate

Surface Settlements Induced by Tunneling in Permeable Strata: a Case History of Shenzhen Metro

TRIAXIAL MIXED PILE JOINT DEWATERING METHOD FOR CONSTRUCTION OF PASSAGE CONNECTING TUNNELS

RESEARCH ON SOIL DEFORMATION INDUCED BY OVERLAPPED TUNNELING IN STRATUM SOIL

Layered Grouting Technology Based on a Comprehensive Water-to-Cement Ratio for the Overlying Loess Stratum of Urban Shallow Tunnels

A Hybrid Construction Method for Shallow Buried Urban Tunnel with Ultra-Small Clear Distance

Numerical Analysis of Grouting of Water-Enriched Karst Highway Tunnel Based on Critical Water-Enriched Height

Three-dimensional Numerical Modeling of Water Distribution Tunnels in Karst Area

Study on the Control of Underground Rivers by Reverse Faults in Tunnel Site and Selection of Tunnel Elevation

Treatment and Effect of Loess Metro Tunnel under Surrounding Pressure and Water Immersion Environment

Experiment and Numerical Simulation on Grouting Reinforcement Parameters of Ultra-Shallow Buried Double-Arch Tunnel

Study on the optimum grouting materials and their performance in the TBM tunnel collapse reinforcement project

Bridging the gap between engineering properties and grouting reinforcement mechanisms for loess in eastern China: taking Jinan loess as an example

Experimental investigation on the reinforcement of a high-pressure jet grouting pile for an ultra-shallow tunnel in a strongly weathered stratum

Investigation of a new reverse drainage construction and the pressure-reducing effect of a tunnel in a water-rich karst location

Grouting Treatment and Parameters Optimization in Watery Karst Areas of High Speed Railway Tunnel Based on Comprehensive Geological Forecast: A Case Study

Deformation and failure characteristics of high-speed tunnels in complex karst areas: a case at the Qilinguan tunnel

Parameters Optimization of Curtain Grouting Reinforcement Cycle in Yonglian Tunnel and Its Application

Investigation on the seepage-stress field evolution mechanism and failure process of karst tunnels in water-rich areas

Mitigation of tunnel support design risks for hydropower projects within high tectonic stress regimes – an empirical analysis

Analytical Study of the Bolts-Grouting Reinforcement in Cylindrical Lined Tunnels Considering Seepage