Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. This research work investigates the tribological characteristics of Abutilon Indicum Fiber (AIF) reinforced composites with epoxy as the binding agent. The Abutilon Indicum fiber reinforced composites were manufactured by compression molding technique. These composites were fabricated by varying the fiber volume fraction ranging from 5%, 10%, 15% and 20% respectively and considering the fiber length as a fixed factor due to its short length. This research paper illustrates the effects of different fiber volume fractions (5,10,15 and 20%) on the tribological properties such as Specific wear rate (SWR) and Coefficient of friction (μ) of Abutilon Indicum fiber reinforced composites. Sliding wear tests were carried out under dry environment conditions with pin-on-disc wear testing machine. The experiments were performed for each composite with different combinations of testing parameters, sliding loads (10, 20 and 30 N); sliding distances (1,2 and 3 km); sliding speeds (1,2 and 3 m/s). Shore D hardness of 78.22 is determined to be higher for 15% volume fraction of AIF composites. Results conclude that the addition of AIFs in these composites enhanced the tribological performance with good wear resistance in relation with the pure epoxy-based composites with 15% volume fraction of AIFs displaying best results with higher resistance to wear at various operating conditions. Composites produced with 20% volume fraction displays the effects of fiber agglomeration which in turn has an inverse effect on hardness; limits the wear resistance with higher friction and wear rate and such results agree well with the wear debris, pits and contact patches in micrographs. Optimal fiber volume fraction of 15% was suggested in fabrication of composites for usage of AIFs as friction material.

Studies on the characteristic features of Abutilon indicum fibre with chemical treatments for the potential application in cement composites

Characterization of alkali-treated cellulosic fibers derived from Calamus tenuis canes as a potential reinforcement for polymer composites

Novel Cellulosic Natural Fibers from Abelmoschus Ficulneus Weed: Extraction and Characterization for Potential Application in Polymer Composites

Investigation of mechanical, thermal, and chemical properties of raw and NaOH-treated bagasse/halfa grass/coir fiber

Influence of optimal alkali treated Areca catechu L. peduncle fiber for light weight polymer composites applications

A comprehensive review on the mechanical, physical, and thermal properties of abaca fibre for their introduction into structural polymer composites

Examining the physico-chemical, structural and thermo-mechanical properties of naturally occurring Acacia pennata fibres treated with KMnO4

Characterisation of alkali-treated novel cellulosic fibres derived from Dombeya Buettneri plant as a potential reinforcement for polymer composites

Study on the engineering properties of abaca/hemp/kenaf natural fiber mats reinforced with Anogeissus latifolia, polyester resin, and fly ash nano powder nanocomposites

Nano-clay treatment of jute fiber for reinforcement in polymer composites: Mechanical, morphological, and thermo-kinetic analysis

Thermomechanical Analyses of Alkali-Treated Coconut Husk-Bagasse Fiber-Calcium Carbonate Hybrid Composites

Influence of NaOH treatment on physical, chemical, thermal, and morphological behavior of aloe vera, banana, and corn husk fiber

Effect of chemical treatments of fibre surface on mechanical properties and wear rate of Beerakaya (Luffa acutangula) reinforced epoxy polymer composites

The Improvement of the Tribological Behaviour of Chemically Treated Abaca Fibre-Reinforced Polymer Composites

An investigation on tribology performance of Abutilon Indicum fibre reinforced polymer composites

Examine the static and dynamic mechanical properties of alkali-treated Cannabis sativa plant fiber-reinforced composites

Influence of Alkali Treatment on Bamboo/Coconut Husk Hybrid Fibre Polyester Composite

Effect of alkali treatment on cotton/bamboo fibres for application as a reinforcement material

Influence of surface treatments in natural fibre reinforced composites

Investigating the Mechanical, Thermal, and Crystalline Properties of Raw and Potassium Hydroxide Treated Butea Parviflora Fibers for Green Polymer Composites

Influence of chemical treatment of bamboo fibers on the vibration and acoustic characterization of carbon/bamboo fiber reinforced hybrid composites