Abstract:This paper proposes a piezoresistive high-temperature absolute pressure sensor based on (100)/(111) hybrid SOI (silicon-on-insulator) silicon wafers, where the active layer is (100) silicon and the handle layer is (111) silicon. The 1.5 MPa ranged sensor chips are designed with the size as tiny as 0.5 × 0.5 mm, and the chips are fabricated only from the front side of the wafer for simple, high-yield and low-cost batch production. Herein, the (100) active layer is specifically used to form high-performance piezoresistors for high-temperature pressure sensing, while the (111) handle layer is used to single-side construct the pressure-sensing diaphragm and the pressure-reference cavity beneath the diaphragm. Benefitting from front-sided shallow dry etching and self-stop lateral wet etching inside the (111)-silicon substrate, the thickness of the pressure-sensing diaphragm is uniform and controllable, and the pressure-reference cavity is embedded into the handle layer of (111) silicon. Without the conventionally used double-sided etching, wafer bonding and cavity-SOI manufacturing, a very small sensor chip size of 0.5 × 0.5 mm is achieved. The measured performance of the 1.5 MPa ranged pressure sensor exhibits a full-scale output of approximately 59.55 mV/1500 kPa/3.3 VDC in room temperature and a high overall accuracy (combined with hysteresis, non-linearity and repeatability) of 0.17%FS within the temperature range of −55 °C to 350 °C. In addition, the thermal hysteresis is also evaluated as approximately 0.15%FS at 350 °C. The tiny-sized high temperature pressure sensors are promising in various industrial automatic control applications and wind tunnel testing systems.

Fabrication and temperature coefficient compensation technology of low cost high temperature pressure sensor

A High-Temperature Piezoresistive Pressure Sensor with an Integrated Signal-Conditioning Circuit

Design and evaluation of oil-filled isolated high temperature piezoresistive pressure sensor

A Single-Side Micromachined MPa-Scale High-Temperature Pressure Sensor

A Micro SOI Pressure Sensor with Compensation hole for High Temperature Applications

High-temperature piezoresistive pressure sensor based on implantation of oxygen into silicon wafer

Design and optimization of a TSV 3D packaged pressure sensor for high temperature and dynamic measurement

High temperature pressure sensor using a thermostable electrode

Liquid-free, piezoresistive, SOI-based pressure sensor for high temperature measurements up to 400 °C

A Microwave Pressure Sensor Loaded with Complementary Split Ring Resonator for High-Temperature Applications

A novel temperature compensated piezoresistive pressure sensor

High temperature pressure sensor using Cu-Sn wafer level bonding

Femtosecond Laser Processing Assisted SiC High-Temperature Pressure Sensor Fabrication and Performance Test

Exploring the nonlinear piezoresistive effect of 4H-SiC and developing MEMS pressure sensors for extreme environments

Inverted-Cup High-Temperature and High-Frequency Piezoresistive Pressure Sensor

A novel SOI pressure sensor for high temperature application

Temperature Compensated Wide-Range Micro Pressure Sensor with Polyimide Anticorrosive Coating for Harsh Environment Applications

Design optimization of high pressure and high temperature piezoresistive pressure sensor for high sensitivity

Development of Highly Sensitive and Thermostable Microelectromechanical System Pressure Sensor Based on Array-Type Aluminum–Silicon Hybrid Structures

Design and implementation of a kind of high precision temperature compensating system for silicon-on-sapphire pressure sensor

Temperature-Compensated Interferometric High-Temperature Pressure Sensor Using a Pure Silica Microstructured Optical Fiber