Abstract:Background: Carbon nanotube-based cold cathode technology has revolutionized the miniaturization of X-ray tubes. However, current applications of these devices required optimization for large, uniform fields with low intensity. Purpose: This work investigated the feasibility and radiological characteristics of a novel conical X-ray target optimized for high intensity and high directionality to be used in a compact X-ray tube. Methods: The proposed device uses an ultrathin, conical tungsten-diamond target that exhibits significant heat loading while maintaining a small focal spot size and promoting forward-directedness of the X-ray field through preferential attenuation of oblique-angled photons. The electrostatic and thermal properties of the theoretical tube were calculated and analyzed using COMSOL Multiphysics software. The production, transport, and calculation of radiological properties associated with the resultant X-ray field were performed using the Geant4 toolkit via its wrapper, TOPAS. Results: Heat transfer analysis of this X-ray tube demonstrated the feasibility of a 200-kV electron beam bombarding the proposed target at a maximum current of 100 mA using a 1-ms symmetric duty cycle. The cathode of the X-ray tube was designed to be segmented into nine switchable electrical segments for modulation of the focal spot size from 0.4- to 10.8-mm. After importing the COMSOL-derived electron beam into TOPAS for X-ray production simulations, radiological analysis of the resultant field demonstrated high levels of intrinsic beam collimation while maintaining high intensity. A maximum dose rate of 17,887 cGy/min was calculated for 1-mm depth in water at 7-cm distance. Conclusions: The proposed X-ray tube design can create highly directional X-ray fields with superior fluence compared to that of current commercial X-ray tubes of comparable size.

Carbon nanotubes as electron source in an x-ray tube

Carbon Nanotubes As Field Emission Sources

Carbon nanotube thin films as photoemissive ionization source

In-situ studies of electron field emission of single carbon nanotubes inside the TEM

Hot electron field emission via individually transistor-ballasted carbon nanotube arrays.

Carbon Nanotubes And Their Potential Field Emission Applications

Field Emission From Short And Stubby Vertically Aligned Carbon Nanotubes

Novel Nanostructured Carbon Nanotube Electron Sources

Enhanced Electron Field Emission in B-doped Carbon Nanotubes

Carbon Nanotubes As an Ultrafast Emitter with A Narrow Energy Spread at Optical Frequency

Achieving High-Current Carbon Nanotube Emitters

Field Electron Emission From Individual Carbon Nanotubes Of A Vertically Aligned Array

Carbon nanotube as a nanoscale Cherenkov--type light emitter - nanoFEL

Investigation of Pulsed Field Electron Emission from Carbon Nanotube Thin Films

Carbon films for use as the electron source in a parallel e-beam lithography system

Field emission from a new form of thin film amorphous carbon having nanoparticle inclusions and carbon nanotubes

Crystalline Multiwall Carbon Nanotubes and Their Application As a Field Emission Electron Source

Ultra Coherent Single Electron Emission of Carbon Nanotubes

Field emission of individual carbon nanotubes on tungsten tips

Ultrahigh Secondary Electron Emission Of Carbon Nanotubes

Proof-of-concept for a thin conical X-ray target optimized for intensity and directionality for use in a carbon nanotube-based compact X-ray tube