Abstract:In the traditional valve controlled hydraulic system, flow control is realized by changing the orifice area of the control valve, which inevitably leads to throttling loss. However, the high-speed on-off valve is different from other control valves because it realizes the instantaneous release of energy by quickly opening the valve port. Therefore, it can be theoretically considered that there is no throttling loss in the fully open state. Inspired by the operating principle of the high-speed on/off valve, a novel high frequency two-dimensional (2D) rotary valve variable mechanism is proposed, which is used to generate discrete fluid by the fluid pulse-width-modulation to control and distribute the flow. This rotary valve variable mechanism is similar to an on/off valve group, and a group of rhombic valve ports are evenly arranged on the circumferential shoulder. The valve spool has two non-interference degrees of freedom: rotary motion and sliding. With the high speed rotation of the valve spool, the valve port can be quickly ‘opened’ (connected with the load) - ‘closed’ (connected with the oil tank); while the valve spool slides, the duration ratio of "on" and "off" of the valve port can be adjusted. Similar to the on-off valve, the flow through the rotary valve port mainly depends on the communication time of the valve port (the instant of opening and closing the valve port is not in the scope of discussion). The concept of 2D rotary valve variable mechanism is verified by the simulation and the experiment. The results show that the variable mechanism generates discrete fluid with adjustable duty cycle. In the PWM driven high-speed on/off valve, this is the technology to realize the fluid pulse-width-modulation through the mechanical structure of the fluid control element itself, rather than the PWM control to control the motor, and finally the fluid is controlled to meet the system's demand for oil supply.

Mathematical modeling and CFD investigation of the novel oscillating shear valve generating sinusoidal signals by fluid pressure fluctuation

The CFD Analysis of Cavitation Erosion and Structural Optimization for an Unloading Valve

Simulation and Experimental Investigation on Pressure Dynamics of Pneumatic High-Speed On/off Valves

Modelling and Experiment Study on Fluid Character of Axial Piston Pump

Modeling and Characteristics Investigation on a Load Control Valve

Design, Modeling and Simulation of an Innovation Pneumatic High Speed On-off Valve Based on Giant Magnetostrictive Material

Research on Dynamic Characteristics of the Rotary Valve.

Design and modeling of precise flux valve driven by piezoelectric ceramics

Model Analysis and System Parameters Investigation for Transient Wave in a Pump–Pipe–Valve System

Waveforms Analysis and Optimization of New Electro-Hydraulic Excitation Technology

Modeling and Parameter Sensitivity Analysis of Valve-controlled Helical Hydraulic Rotary Actuator System

Modeling and simulation analysis of a novel proportional water flow valve with a digital pilot stage

CFD Simulation of Dynamic Characteristics of a Solenoid Valve for Exhaust Gas Turbocharger System

Investigation on the characteristics of a high-frequency two-dimensional rotary valve generating fluid pulse width modulation wave

Finite element analysis and topology optimization of direct-drive compressor valve

Modeling and Simulation Analysis of Speed-Regulating Valve Flow Fluctuations under Differential Pressure Steps

Investigation on a Novel High Frequency Two-Dimensional (2D) Rotary Valve Variable Mechanism for Fluid Pulse-Width-modulation Application

Performance Simulation and Analysis of New High-Frequency Valve

Modeling and experiment of pressure drop on valve section of hydraulic oscillator

The Design and Experimental Research on a High-Frequency Rotary Directional Valve

Structural design and effect analysis on a new type of hydraulic oscillator driven with double valve groups