Abstract:The U.S. Department of Energy Gasoline/Diesel PM Split Study examined the sources of uncertainties in using an organic compound-based chemical mass balance receptor model to quantify the contributions of spark-ignition (SI) and compression-ignition (CI) engine exhaust to ambient fine particulate matter (PM,.,). This paper presents the chemical composition profiles of SI and CI engine exhaust from the vehicle-testing portion of the study. Chemical analysis of source samples consisted of gravimetric mass, elements, ions, organic carbon (OC), and elemental carbon (EC) by the Interagency Monitoring of Protected Visual Environments (IMPROVE) and Speciation Trends Network (SIN) thermal/optical methods, polycyclic aromatic hydrocarbons (PAHs), hopanes, steranes, alkanes, and polar organic compounds. More than half of the mass of carbonaceous particles emitted by heavy-duty diesel trucks was EC (IMPROVE) and emissions from SI vehicles contained predominantly OC. Although total carbon (TC) by the IMPROVE and STN protocols agreed well for all of the samples, the STN/IMPROVE ratios for EC from SI exhaust decreased with decreasing sample loading. SI vehicles, whether low or high emitters, emitted greater amounts of high-molecular-weight particulate PAHs (benzo[ghi]perylene, indeno[1,2,3-cd]pyrene, and coronene) than did CI vehicles. Diesel emissions contained higher abundances of two- to four-ring semivolatile PAHs. Diacids were emitted by CI vehicles but are also prevalent in secondary organic aerosols, so they cannot be considered unique tracers. Hopanes and steranes were present in lubricating oil with similar composition for both gasoline and diesel vehicles and were negligible in gasoline or diesel fuels. CI vehicles emitted greater total amounts of hopanes and steranes on a mass per mile basis, but abundances were comparable to SI exhaust normalized to TC emissions within measurement uncertainty. The combustion-produced high-molecular-weight PAHs were found in used gasoline motor oil but not in fresh oil and are negligible in used diesel engine oil. The contributions of lubrication oils to abundances of these PAHs in the exhaust were large in some cases and were variable with the age and consumption rate of the oil. These factors contributed to the observed variations in their abundances to total carbon or PM2.5 among the SI composition profiles.

Contributions of non-tailpipe emissions to near-road PM2.5 and PM10: A chemical mass balance study

Study of ultrafine particles near a major highway with heavy-duty diesel traffic

Particulate Matter Phthalate, Polycyclic Aromatic Hydrocarbons, and Toxic Metal Concentrations in Tailpipe and Non-Tailpipe Emissions Near Highways

Direct measurement of brake and tire wear particles based on real-world driving conditions

Real‐World Vehicular Source Indicators for Exhaust and Non‐Exhaust Contribution to PM2.5 During Peak and Off‐Peak Hours Using Tunnel Measurement

Evidence of non-tailpipe emission contributions to PM2.5 and PM10 near southern California highways

Vehicular non-exhaust particulate emissions in Chinese megacities: Source profiles, real-world emission factors, and inventories

Brake Wear-Derived Particles: Single-particle Mass Spectral Signatures and Real-World Emissions

Identify the Contribution of Vehicle Non-Exhaust Emissions: a Single Particle Aerosol Mass Spectrometer Test Case at Typical Road Environment

Chemical mass balance source apportionment for combined PM 2.5 measurements from U.S. non-urban and urban long-term networks

Tracer-Gas-Integrated Measurements of Brake-Wear Particulate Matter Emissions from Heavy-Duty Vehicles.

Insights on non-exhaust emissions: An approach for the chemical characterization of debris generated during braking

Chemical Assessment of Real Driving Tire and Road Wear Particles in Urban and Suburban Seoul, Korea

Estimating primary vehicular emission contributions to PM2.5 using the Chemical Mass Balance model: Accounting for gas-particle partitioning of organic aerosols and oxidation degradation of hopanes

Brake wear induced PM<sub>10</sub> emissions during the world harmonised light-duty vehicle test procedure-brake cycle

Evaluations of the Chemical Mass Balance Method for Determining Contributions of Gasoline and Diesel Exhaust to Ambient Carbonaceous Aerosols

Characterization of PM-Bound Heavy Metal at Road Environment in Tianjin: Size Distribution and Source Identification

Chemical Characteristics of Fine Tire Wear Particles Generated on a Tire Simulator

A Practical Approach for On-Road Measurements of Brake Wear Particles from a Light-Duty Vehicle

A New Monitoring-Simulation-source Apportionment Approach for Investigating the Vehicular Emission Contribution to the PM2.5 Pollution in Beijing, China

Variations in Speciated Emissions from Spark-Ignition and Compression-Ignition Motor Vehicles in California’s South Coast Air Basin