Abstract:Solid-state transformers are easy to introduce gas cavities in the manufacturing and assembly processes, which is considered to be one of the reasons for the decrease of interfacial breakdown strength of epoxy resin-polyimide (EP-PI) composite insulation. Based on the contact theory, it is pointed out that the size and shape of the cavity are related to the contact pressure and surface roughness. Combined with the finite element simulation, it is found that the gas cavity will cause electric field distortion at the interface. The effect of interfacial contact morphology on discharge characteristics was investigated by building a platform for the high-frequency interface discharge test. Experimental results show that the interfacial breakdown voltage is affected by surface roughness and contact pressure. The interface breakdown voltage increased from 12.91 kV to 19.34 kV when the contact pressure was increased from 5 bar to 20 bar after sanding with a sandpaper grit of 2000, an increase of 49.81%. The smoother the surface of the two materials, the higher the breakdown voltage at the interface. The mechanisms of surface roughness and contact pressure on the discharge characteristics of the EP-PI interface are further investigated. Surface roughness hinders the development of secondary electron avalanche by affecting the actual incident angle of electrons and reducing the kinetic energy of electron acceleration. At the same time, when the surface roughness increases, the surface resistivity decreases, and the electron avalanche current increases. The synergistic effect of the two factors promotes the development of interfacial discharge. While the contact pressure will directly affect the proportion of interface contact area and the density of contact asperity, and introduce more interfacial discharge obstacles, thereby increasing the breakdown voltage at the interface. The above research results provide a basis for the optimization design of a solid-state transformer composite insulation system.

Research on interface charge behaviour and electrical threshold in layered epoxy/paper composites: From experiment to simulation

Investigation of Charge Accumulation and Decay Processes in Epoxy-Based Composites Using Quantum Chemical Calculations under the Effect of Electric Field

Investigation of Electrical and Thermal Properties of Epoxy Resin/Silicon Carbide Whisker Composites for Electronic Packaging Materials

Space Charge Characteristics at the Interface of Laminated Epoxy Resin

Experimental and Finite Element Analysis of Epoxy-Based Composites for Packaging Materials to Reduce Electric Field and Power Loss under AC and DC Conditions

Interfacial Insight of Charge Transport in BaTiO3/Epoxy Composites

Synergistic Interface Effects in Composite Dielectrics: Insights into Charge Trapping Regulation through Multiscale Modeling

Surface Charge Properties of Epoxy Composites under DC Voltage Affected by Surface and Bulk Conductivity

A novel simulation of space charge decay dynamics after removing voltage in epoxy resin composites

Numerical simulation of the interfacial stress between epoxy resin and metal conductor of power equipment during epoxy curing

Synergetic optimization of charge transport and breakdown strength of epoxy nanocomposites: Realizing sandwich topological structure through constructing a SiC@SiO2/EP surface layer and m-BNNS/EP insert layer

Effect of Space Charge on Interface Discharge Characteristics in Multilayer Dielectric

Ambipolar Charging Responses of Nanoscale Interfaces

Space Charge Behavior in Epoxy‐Based Dielectrics: Progress and Perspective

Insight into the interface effect and PTC effect on the temperature-adaptive electrical conductivity of epoxy composite

Influence of Interfacial Contact Morphology on High Frequency Breakdown Strength and Partial Discharge Characteristics of Epoxy-Polyimide

Simulation of Composite Insulator Interface Defects in Partial Discharge

Interface Charge Characteristics in Polymer Dielectric Contacts: Analysis of Acoustic Approach and Probe Microscopy

A single-electron tunneling model: a theoretical analysis of a metal nanoparticle-doped epoxy resin to suppress surface charge accumulation on insulators subjected to DC voltages

Effect of Interfacial Contact Morphology on High-Frequency Breakdown Characteristics of Epoxy Resin-polyimide

Tuning Interfacial Characteristics of Epoxy Composites Towards Simultaneous High Thermal and Dielectric Properties