Abstract:Abstract 1,3‐Dienes/styrene sequence‐controlled copolymers are widely used as thermoplastic elastomers, transparent impact resin and synthetic rubber and other materials. In this work, the binary anionic copolymerization of styrene ( S ) and C5‐dienes including 1,3‐pentadiene ( P , E / Z = 65/35) and isoprene ( I ) were studied in cyclopentyl methyl ether (CPME) ‘green’ solvent using n ‐BuLi as initiator, and the effects of copolymerization monomer ratio and polar additive (PA) on the copolymerization kinetics and monomer sequence distributions were investigated. The kinetic analysis results showed that all copolymerization systems were the first‐order reaction and the C5‐dienes/ S could be quantitatively consumed. The addition of S or I was conducive to the efficient conversion of P . Although the addition of PAs had little effect on the polymerization rate, it had a great influence on the microstructure and sequence distribution of the copolymer. 1 H NMR tracking analysis showed that, for S/P copolymerization with different feeding ratios 1/3 < f P < 2/3, the instant composition F P in the copolymer remained relatively constant at 15% < F P < 35% when the monomer conversion rate was below 60%, and thus the inevitable formation of P microblocks in subsequent polymerization sequences was observed. Additionally, similar sequence distributions were obtained in the case of I/P copolymerization systems. By contrast, S / I copolymerization conformed to the typical random copolymerization pattern, and the copolymerization activity of S was slightly higher than that of the I in CPME. The use of strong PAs such as 2,2‐di(2‐tetrahydrofuran)propane directly resulted in a change of monomer sequence from a random pattern to a gradual block pattern. Moreover, the 3,4‐isoprene branch units were much more sensitive to solvent and PA than 1,2‐pentadiene units for C5‐dienes; also Fourier transform infrared and DSC analysis verified the microstructure and sequence analysis results mentioned above. In addition, the results of gel permeation chromatography showed that the copolymerization process in CPME had excellent controllable characteristics. © 2023 Society of Industrial Chemistry.

Combining Cyclic Units and Unsaturated Pendant Groups by Propene/1,5-Hexadiene Copolymerization Toward Functional Isotactic Polypropylene

Preparation Of Comb-Shaped Polyolefin Elastomers Having Ethylene/1-Octene Copolymer Backbone And Long Chain Polyethylene Branches Via A Tandem Metallocene Catalyst System

A Convenient, Highly-Efficient Method for Preparation of Hydroxyl-Terminated Isotactic Poly（propylene） and Functional Di-Block Copolymer

Ethylene-alt-α-Olefin Copolymers by Hydrogenation of Highly Stereoregular cis-1,4 Polydienes: Synthesis and Structural Characterization

Synthesis and Characterization of 4-Methyl-1-Pentene/1,5-Hexadiene Isotactic Copolymers with Enhanced Low-Temperature Mechanical Performance

Synthesis of functional polyolefins via ring-opening metathesis polymerization of ester-functionalized cyclopentene and its copolymerization with cyclic comonomers

Functionalized Cyclic Olefin Copolymers: Chemoselective Polymerization of Cyclopropane-Containing Norbornadiene Dimer using Titanium Catalyst and Post-Polymerization Modification

Amorphous Elastomeric Ultra-High Molar Mass Polypropylene in High Yield by Half-Titanocene Catalysts

Preparation of Hydroxyl Functionalized Cis-1,4 Polydienes

Nonconjugated α,ω-Diolefin/Propylene Copolymerization to Long Chain-Branched Polypropylene by Ziegler–Natta Catalyst: Overcoming Steric Hindrance by Introducing an Extra Electronic Pulling Effect

Combination of Ethylene, 1,3-Butadiene, and Carbon Dioxide into Ester-Functionalized Polyethylenes Via Palladium-Catalyzed Coupling and Insertion Polymerization

Stereoblock vs Stereoblend: Orchestrating Competing Living Coordination Chain Transfer Polymerizations for the One-Pot Production of New Viscoelastic Grades of Poly(4-methyl-1-pentene)

Synthesis, kinetic study and characterization of C5 ‐dienes/styrene copolymers via living anionic polymerization in cyclopentyl methyl ether solvent

13C NMR Studies of Ethylene-Propylene Copolymers Prepared with Homogeneous Metallocene-Based Ziegler-Natta Catalysts

Oscillating stereocontrol: a strategy for the synthesis of thermoplastic elastomeric polypropylene

Copolymerization of Propylene and Long-Chain Unsaturated Aromatic Esters with Big Steric Hindrance over TiCl4/MgCl2/AlEt3

Fluorinated Bis(phenoxyketimine)titanium Complexes for the Living, Isoselective Polymerization of Propylene: Multiblock Isotactic Polypropylene Copolymers Via Sequential Monomer Addition.

Preparation of Well-Controlled Isotactic Polypropylene-Based Block Copolymers with Superior Physical Performance via Efficient Coordinative Chain Transfer Polymerization

Comparative Studies on Properties of Polymers with Bulky Side Groups Synthesized by Cyclopolymerization of Α,ω-Dienes and Α,ω-Diynes

Synthesis of High-Molecular-Weight Polypropylene Elastomer by Propylene Polymerization Using α-Diimine Nickel Catalysts

Comparative Analysis of Ethylene/Diene Copolymerization and Ethylene/Propylene/Diene Terpolymerization Using Ansa-Zirconocene Catalyst with Alkylaluminum/Borate Activator: The Effect of Conjugated and Nonconjugated Dienes on Catalytic Behavior and Polymer Microstructure