Abstract:Abstract Objective : To develop a bremsstrahlung target and megavoltage (MV) x-ray irradiation platform for ultrahigh dose-rate (UHDR) irradiation of small-animals for the Advanced Rare Isotope Laboratory (ARIEL) electron linac (e-linac) at TRIUMF. Approach : An electron-to-photon converter design for UHDR radiotherapy (RT) was centered around optimization of a tantalum-aluminum (Ta-Al) explosion-bonded target. Energy deposition within a homogeneous water-phantom and the target itself were evaluated using EGSnrc and FLUKA MC codes, respectively, for various target thicknesses (0.5-1.5 mm), beam energies (E e- =8,10 MeV) and electron (gaussian) beam sizes (2σ=2-10 mm). Depth dose-rates in a 3D-printed mouse phantom were also calculated to infer the compatibility of the 10 MV dose distributions for FLASH-RT in small-animal models. Coupled thermo-mechanical FEA simulations in ANSYS were subsequently used to inform the stress-strain conditions and fatigue life (N) of the target assembly. Main Results : Dose-rates of up to 128 Gy s -1 at the phantom surface, or 85 Gy s -1 at 1-cm depth, were obtained for a 1x1 cm 2 field size, 1-mm thick Ta target and 7.5 cm source-to-surface distance using the nominal treatment-beam configuration (E e- =10 MeV,2σ=5 mm,P=1 kW); furthermore, removal of the collimation assembly and using a shorter (3.5 cm) SSD afforded dose-rates >600 Gy s -1 , albeit at the expense of field conformality. Target temperatures were maintained below the tantalum, aluminum and cooling-water thresholds of 2000, 300 and 100 °C, respectively, while the aluminum strain behavior remained everywhere elastic and helped ensure N>3000 thermal cycles could be tolerated over the prescribed 5 yr life of the target. Significance : Effective design iteration, target cooling and failure mitigation have thus culminated in a robust target compatible with intensive transient (FLASH) and steady-state (diagnostic) applications. The ARIEL UHDR photon source will facilitate FLASH-RT experiments concerned with sub-second, pulsed or continuous beam irradiations at dose rates in excess of 40 Gy s -1 .

Secondary irradiation for radiation damage studies and isotope harvesting

Understanding radioactive ion beam production at ISAC through yield measurements and simulations

Transuranium isotopes at ISAC/TRIUMF

Secondary Ion Beams

A facility for radiation hardness studies based on a medical cyclotron

Radioactive Ion Sources

Experimental Study of Residual Activity Induced in Aluminum Targets Irradiated by High-Energy Heavy-Ion Beams: A Comparison of Experimental Data and FLUKA Simulations

Activation of Accelerator Construction Materials by Heavy Ions

Storage, Accumulation and Deceleration of Secondary Beams for Nuclear Astrophysics

Studies of material properties under irradiation at BNL Linear Isotope Producer (BLIP)

Conceptual Design of a Low-Energy Ion Beam Storage Ring and a Recoil Separator to Study Radiative Neutron Capture by Radioactive Ions

Design optimization of an electron-to-photon conversion target for ultra-high dose rate x-ray (FLASH) experiments at TRIUMF

An accelerator facility for intermediate energy proton irradiation and testing of nuclear materials

A New Family of High-Current Cyclotrons for Isotope Production

Production and purification of molecular 225Ac at CERN-ISOLDE

Production study of Fr, Ra and Ac radioactive ion beams at ISOLDE, CERN

Design of the 590 MeV proton beamline for the proposed TATTOOS isotope production target at PSI

Ion production and RF generation in the DARHT-II beam dump

Production of short lived radioactive beams of radium

Design and thermal simulations towards a high intensity radioactive ion source for ISOL@MYRRHA

High Power Cyclotrons: The Bridge Between Beyond the Standard Model Physics, Computation, and Medical Applications