Abstract:Sustainable polymer composites (or biocomposites) based on renewable and green polymers are progressively under development in a technological paradigm shift from "just use more and more" to "convert into value-added products". Therefore, significant efforts should focus not only on their reduced environmental impact but also on maximizing their performance and broadening their application range. Herein, the bio-based blends based on Mater-Bi bio-plastic and poly( ε -caprolactone), at a weight ratio of 70:30, were developed, followed by the addition of UFC100 cellulose filler to yield sustainable biocomposites. The effects of cellulose chemical modification with three diisocyanates, i.e., hexamethylene diisocyanate (HDI), methylene diphenyl isocyanate (MDI), or toluene diisocyanate (TDI) on the surface properties of biocomposites were evaluated by water contact angle and surface roughness detected by atomic force microscopy (AFM). Biocomposites containing cellulose modified with HDI, MDI, or TDI revealed contact angle values of 93.5°, 97.7°, and 92.4°, respectively, compared to 88.5° for reference blend, indicating an enlarged hydrophobicity window. This action was further confirmed by increased fracture surface roughness and miscibility detected by microscopic observation (scanning electron microscopy (SEM) and AFM). An in-depth oscillatory rheological evaluation has identified MDI, followed by TDI, as the most efficient compatibilizer of the analyzed system. Correspondingly, thermogravimetric analysis and differential scanning calorimetry analyses showed more residue and higher melting temperatures for biocomposites, more promisingly with MDI and TDI modifiers. In conclusion, either incorporation or diisocyanate modification of cellulose affects both surface and bulk properties, providing vital insights into future developments in the field. Proper selection of diisocyanate modifier of cellulose may enable engineering of composites performance.

Synthesis of thermoplastic cellulose grafted polyurethane from regenerated cellulose

A facile strategy towards heterogeneous preparation of thermoplastic cellulose grafted polyurethane from amorphous regenerated cellulose paste

Grafting of nonpolar polyisoprene as midblock and polar polylactide as outer block onto cellulose to produce bio-based thermoplastic elastomers

High-performance cellulose/thermoplastic polyurethane composites enabled by interaction-modulated cellulose regeneration

Synthesis and Characterization of Functional Cellulose-Ether-Based PCL- and PLA-Grafts-Copolymers

Efficient Conversion of Cellulose to Thermoplastics by Mechanochemical Esterification

Cellulose blends from gel extrusion and compounding with polylactic acid

Synthesis and characterization of poly(vinyl chloride)-g-poly (2-hydroxyethyl methacrylate) copolymers

Preparation of strong, UV-blocking and sustainable glucose-cross-linked cellulose plastics via hydroxyl-yne click reaction

Regulation of the Thermal Sensitivity of Hydroxypropyl Cellulose by Poly(n-Isopropylacryamide) Side Chains.

Grafting Polycaprolactone Diol Onto Cellulose Nanocrystals Via Click Chemistry: Enhancing Thermal Stability and Hydrophobic Property.

Plasticized Cellulosic Films by Partial Esterification and Welding in Low-Concentration Ionic Liquid Electrolyte

Sustainable chemically modified poly(butylene adipate-co-terephthalate)/thermoplastic starch/poly(ε-caprolactone)/cellulose biocomposites: looking at the bulk through the surface

Synthesis and characterization of temperature-sensitive cellulose-graft-poly(N-isopropylacrylamide) copolymers

A Biodegradable, Waterproof, and Thermally Processable Cellulosic Bioplastic Enabled by Dynamic Covalent Modification

Robust, waterproof, and degradable cellulose-based polyimine vitrimer for plastic replacement

Facile preparation of near-monodisperse oligocellulose and its elastomeric derivatives with tunable mechanical properties

Lignin demethylation enabled robust and reprocessable bio-polyurethane elastomer with adaptable cross-linking network

Polylactide porous biocomposites with high heat resistance by utilizing cellulose template-directed construction

Combining Renewable Ethyl Cellulose and Acrylate to Fabricate Sustainable TPEs via Controlled Polymerization

Synthesis of Cellulose-graft-Poly(N,N-dimethylamino-2-ethyl Methacrylate) Copolymers Via Homogeneous ATRP and Their Aggregates in Aqueous Media