Abstract:The objective of this work is the development of a novel finite element formulation describing the contact interaction of slender beams in complex 3D configurations involving arbitrary beam-to-beam orientations. It is shown in a mathematically concise manner that standard beam contact models based on a point-wise contact force fail to describe a considerable range of configurations, which are, however, likely to occur in practical applications. On the contrary, the formulation proposed here models beam-to-beam contact by means of distributed line forces, a procedure that is shown to be applicable for arbitrary geometrical configurations. The proposed formulation is based on a Gauss-point-to-segment type contact discretization and a penalty regularization of the contact constraint. By means of detailed theoretical and numerical investigations, it is shown that this approach is more suitable for beam contact than possible alternatives based on mortar type contact discretizations or constraint enforcement by means of Lagrange multipliers. The proposed formulation is enhanced by a consistently linearized integration interval segmentation avoiding numerical integration across strong discontinuities. In combination with a smoothed contact force law and the employed C1-continuous beam elements, this procedure drastically reduces the numerical integration error, an essential prerequisite for optimal spatial convergence rates. The resulting line-to-line contact algorithm is supplemented by contact contributions of the beam endpoints, which represent boundary minima of the underlying minimal distance problem. Finally, a series of numerical test cases is analyzed in order to investigate the accuracy and consistency of the proposed formulation regarding integration error, spatial convergence behavior and resulting contact force distributions. For one of these test cases, an analytical solution based on the Kirchhoff theory of thin rods is derived, which can serve as valuable benchmark for the proposed model but also for future beam-to-beam contact formulations.

Theoretical model of a finite force at the moving contact line

Boundary conditions for the moving contact line problem

Dynamic Wetting and Stress Singularity on Contact Line

An Energy-stable Finite Element Method for the Simulation of Moving Contact Lines in Two-phase Flows

STUDY ON A MECHANICAL EQUILIBRIUM CONDITION AT A THREE-PHASE CONTACT LINE: WETTABILITY ON SOLID SURFACES

Towards Accurate Modeling of Moving Contact Lines

An experimental study of flow near an advancing contact line: a rigorous test of theoretical models

Derivation of Continuum Models for the Moving Contact Line Problem Based on Thermodynamic Principles

Finite element methods for a class of continuum models for immiscible flows with moving contact lines

Continuum models for the contact line problem

A Contact Force Model for the Dynamic Response of Cracks

Moving contact line dynamics: from diffuse to sharp interfaces

A finite element approach for the line-to-line contact interaction of thin beams with arbitrary orientation

A consistent treatment of dynamic contact angles in the sharp-interface framework with the generalized Navier boundary condition

A volume of fluid method for simulating fluid/fluid interfaces in contact with solid boundaries

On the Consistency of Dynamic Wetting Boundary Conditions for the Navier-Stokes-Cahn-Hilliard Equations

A general model for dynamic contact angle over full speed regime

Sharp-Interface Limits of Cahn–Hilliard Models and Mechanics with Moving Contact Lines

Mesoscopic modeling of a two-phase flow in the presence of boundaries: The contact angle

A Study of Dynamic Contact Angles of Shear-Thickening Power-Law Fluids

Straight contact lines on a soft, incompressible solid