Abstract:An absolute MEMS capacitance vacuum sensor with a full range of (1-1000) Pa has been designed, fabricated and tested. The working principle of the capacitance vacuum sensor is explained and its fabrication process is introduced. For obtaining high sensitivity, the sensor's pressure-sensing diaphragm with large width-to-thickness ratio is manufactured using the silicon-on-insulator (SOI). A silicon buffer block is adopted to improve the linearity of the sensor and prevent the pressure-sensing diaphragm from being damaged due to overload. The sensor is packaged by anodic bonding process in a certain high vacuum environment to form a sealed cavity, in which the vacuum degree is maintained by the non-evaporable getter (NEG) film deposited on the buffer block surface. The absolute pressure measurement of the packaged sensor has been performed with a vacuum measurement system. The tests results show that the capacitance-pressure curve is piecewise linear in the full range (1-1000) Pa. And the sensor exhibits high stability and reproducibility. The maximum sensitivity of the sensor is 33.03 fF/Pa, while the resolution can reach 0.5 Pa. Moreover, the temperature characteristic of the sensor has been evaluated, and it turns out that the effect of temperature on the sensor is quite small in a certain temperature range. [2020-0276]

Design of the Interface Circuit for Monolithic MEMS Capacitive Pressure Sensor

Design, Fabrication and Test of a Monolithic Capacitive Pressure Sensor

Analysis and Improvement of an Interface Circuit of Capacitive Sensors

Design and simulation of integrated CMOS-compatible capacitive absolute pressure-sensing microsystems

Measure, Analysis and Improvement of the On-Chip Interface Circuit for a MEMS Capacitive Pressure Sensor

Design of A Novel CMOS Capacitive Absolute Pressure Sensor

Design of an Interface Circuit for Integrated Capacitive Sensors

A Fully Integrated Capacitive Pressure Sensor with High Sensitivity

A novel monolithic CMOS capacitive pressure sensor

A MEMS capacitive pressure sensor compatible with CMOS process

Device Modeling and Optimization of MEMS Based Capacitive Pressure Sensor

Conditioning circuit for precise SiC capacitive pressure sensors

Interface Circuit for Capacitive Microaccelerometer

Design and Fabrication of an Absolute Pressure MEMS Capacitance Vacuum Sensor Based on Silicon Bonding Technology

Circuit Design of an Implantable MEMS Pressure Sensor System

Design and Fabrication of a MEMS Capacitance Vacuum Sensor Based on Silicon Buffer Block

Wafer-Level Self-Packaging Design and Fabrication of MEMS Capacitive Pressure Sensors

A Silicon Directly Bonded Capacitive Absolute Pressure Sensor

The Design of a High Precision Capacitive Pressure Sensor Based on Comb Electrode

Interface For Capacitive Sensor

Design and Manufacture of a MEMS Capacitive Differential Pressure Sensor with High Linearity and Low Sensitivity