Abstract:Building Services Engineering Research and Technology, Ahead of Print. Phase change radiant panels (PCRPs) with thermal storage can enhance the heat capacity of buildings, and reduce building energy consumption. In this paper, a composite phase change material (CPCM) was prepared by paraffin wax-lauric acid/expanded graphite (PW-LA/EG) and applied to radiant panels. This CPCM exhibits a broad temperature range for phase change (10°C - 40°C), with EG at the optimal mass fraction of 14% and PW-LA at the optimal ratio of 1:1. It has a moderate latent heat capacity, a thermal conductivity of 1.692 W/mK, and excellent thermal stability. Furthermore, the simulations were performed in this paper, and the year-round comfort, thermal storage/release characteristics, and the influencing factors of PCRPs were evaluated by TRNSYS software. The results show that the PCRP can enhance indoor comfort throughout the year and exhibit excellent thermal storage and release properties. The analysis of influencing factors indicates that the thickness of the PCM has a small impact on the PCRP. It is recommended that a radiant panel coverage rate of at least 70% and a water supply time of 10 h in summer and 8 h in winter. These optimized parameter values can offer valuable guidance for the design and practical application of PCRPs.Practical applicationPhase change materials have been widely studied as materials used for thermal energy storage. The radiant panel with phase change materials can enhance the heat capacity of buildings, and reduce building energy consumption. This paper proposes a phase change radiant panel that can be used to solve the problem of year-round energy storage of radiant panels in hot summer and cold winter areas. Furthermore, this paper uses TRNSYS software to study the performance of the phase change radiant panels and offers valuable guidance for the design and practical application of PCM radiant panels.

Infrared-transparent bubble wrap assisted high-intensity radiant cooling

Study of the cooling performance of an anti-condensation radiant cooling unit with an infrared-transparent silicon wafer

Experimental Investigation on the Heat Transfer Performance and Water Condensation Phenomenon of Radiant Cooling Panels

Experimental study on the thermal performance of Type-C near dew point radiant cooling wall panel

A Comprehensive Review of High-Transmittance Low-Conductivity Material-Assisted Radiant Cooling Air Conditioning: Materials, Mechanisms, and Application Perspectives

Experimental study on condensation-free radiant cooling panel with low-temperature for local cooling in vehicles - Part 1: Design process and feasibility evaluation with performance test

Integrated Radiative and Evaporative Cooling Beyond Daytime Passive Cooling Power Limit

Comprehensive evaluation and analysis of a porous polymer coating for highly efficient passive radiative cooling

A computational model of an air-layer radiant cooling panel for optimizing and design

Wrinkled surface microstructure for enhancing the infrared spectral performance of radiative cooling.

A transparent radiative cooling emitter with multi-band spectral regulation for building energy saving

Thermal Performance Investigation Of Membrane-Assisted Radiant Cooling System For Localised Outdoor Cooling Hub

Efficient Radiative Cooling Coating with Biomimetic Human Skin Wrinkle Structure

Sustainable cellulose foams for all-weather high-performance radiative cooling and building insulation

Transparent, Anti-Corrosion and High Broadband Emission Coating for Zero Energy Consumption Cooling Technology

Efficient Passive Cooling Over a Novel Bifunctional Polymer Bilayer Composite Simultaneously Possessing Radiative and Evaporative Cooling Properties

A Triple-Layer Membrane with Hybrid Evaporation and Radiation for Building Cooling

Both sub-ambient and above-ambient conditions: a comprehensive approach for efficient use of radiative cooling

Structure optimization of radiant cooling panel: A literature review and assessment

Preparation and performance study of a novel radiant panel for thermal and cooling storage with phase change materials

Radiant Air-Conditioning with Infrared Transparent Polyethylene Aerogel