Abstract:Most recently, the continuous deterioration of the aquatic environment triggered by both heavy metals and synthetic organic dyes has imparted serious threats to the ecosphere and drinking water safety. However, it is still extremely challenging to treat complex wastewater containing these two classes of pollutants via a one-step method owing to the significant differences in their physicochemical properties. In the current work, versatile magnetic MWCNTs decorated with PEI (denoted as MWCNTs@Fe3O4/PEI) was fabricated by a facile, rapid and reproducible strategy and applied to as a robust adsorbent for simultaneously removing methyl orange (MO) and Cr(vi) from aqueous solutions. The physicochemical properties of the as-designed nanohybrid were investigated using various analytical techniques, i.e. XRD, FT-IR, SEM, TEM, VSM, zeta potential, etc. It was found that the surface charge properties of the MWCNTs as well as its dispersion in aqueous solution were greatly changed after the introduction of PEI molecules. The resulting nanohybrid exhibited attractive adsorption capabilities toward anionic MO and Cr(vi). In the perspective of a mono-pollutant system, the time-dependent adsorption process matched well with a pseudo-second-order kinetics equation, the adsorption isotherm data at r.t. were well fitted by a Langmuir model with maximum monolayer uptake capacity of 1727.6 mg g-1 for MO and 98.8 mg g-1 for Cr(vi), and the removal process of both pollutants was thermodynamically spontaneous and exothermic. In the MO-Cr(vi) binary system, the uptake of Cr(vi) by the as-prepared adsorbent was evidently enhanced by the presence of MO, while the coexisting Cr(vi) exerted a small negative effect on the sorption of MO; which was attributed to the different adsorption mechanisms of both pollutants on the as-recommend adsorbent. The much better adsorbing performance of the resulting MWCNTs@Fe3O4/PEI for MO and Cr(vi) than that of the pristine MWCNTs or the MWCNTs/Fe3O4 composite was mainly ascribed to the high surface area of the MWCNTs, the high density of protonated N-rich groups of PEI as well as the excellent dispersion and solubility of the resulting nanocomposites. Moreover, the obtained nanohybrids can be easily recovered after being used by a permanent magnet and still retained high stability and excellent reusability after consecutive adsorption-desorption cycles, implying its great potential in practical applications. Therefore, the as-fabricated MWCNTs@Fe3O4/PEI composite could be recommended as a promising candidate adsorbent for the simultaneous capture of MO and Cr(vi) from complex wastewater via multiple uptake mechanisms (e.g. electrostatic attraction, π-π stacking and hydrogen bonding).

Cu2MoS4-based magnetic composites as effective adsorbent and photocatalyst for removal of organic contaminants in water

Polypyrrole-functionalized magnetic Bi2MoO6 nanocomposites as a fast, efficient and reusable adsorbent for removal of ketoprofen and indomethacin from aqueous solution

Efficient removal of organic pollutants from aqueous media using newly synthesized polypyrrole/CNTs-CoFe2O4 magnetic nanocomposites

Magnetic Core@Shell Fe 3 O 4 @Polypyrrole@Sodium Dodecyl Sulfate Composite for Enhanced Selective Removal of Dyestuffs and Heavy Metal Ions from Complex Wastewater

Magnetic Photocatalytic Nano-semiconductors Prepared from Carbon Quantum Dots Compounded with Copper Ferrate and Their Application in Dye Wastewater Treatment

Nanomagnetic Polyhedral Oligomeric Silsesquioxanes Composite Derived Sulfur-Containing Adsorbents for Effective Elimination of Hexavalent Chromium and Organic Cationic Dyes from Water

Effective adsorption and removal of Cr(VI) from wastewater using magnetic composites prepared by synergistic effect of polypyrrole and covalent organic frameworks

Sulfonic Acid-Modified Polyacrylamide Magnetic Composite with Wide Ph Applicability for Efficient Removal of Cationic Dyes

Simultaneous Capture of Methyl Orange and Chromium(vi) from Complex Wastewater Using Polyethylenimine Cation Decorated Magnetic Carbon Nanotubes As a Recyclable Adsorbent

Selective adsorption performance of H6P2Mo15W3O62-based Cu3(BTC)2 composite in treatment of simulated cationic dye wastewater

Structural selective regulation of Fe3O4@C composite as adsorbent for removing different organic pollutants

CuFe2O4/CuO Magnetic Nano-Composite Activates PMS to Remove Ciprofloxacin: Ecotoxicity and DFT Calculation

Enhanced Dark Adsorption and Visible-Light-driven Photocatalytic Properties of Narrower-Band-gap Cu2S Decorated Cu2O Nanocomposites for Efficient Removal of Organic Pollutants.

Efficient removal of copper and silver ions in electroplating wastewater by magnetic-MOF-based hydrogel and a reuse case for photocatalytic application

Hybridization of magnetic MOF composites with 3D terminal carboxyl hyperbranched polymers for dye wastewater treatment

Polymer-microsphere coated with MoS 2 nanoflowers for the removal of Pb(II) from water: Polydopamine-mediated MoS 2 assembly and efficient Pb(II) adsorption

Enhanced sorption and reduction of Cr(VI) by the flowerlike nanocomposites combined with molybdenum disulphide and polypyrrole

Polypyrrole Coated Molybdenum Disulfide Composites As Adsorbent for Enhanced Removal of Cr(VI) in Aqueous Solutions by Adsorption Combined with Reduction

Enhanced Adsorption/photocatalytic Removal of Cu(Ⅱ) from Wastewater by a Novel Magnetic Chitosan@ Bismuth Tungstate Coated by Silver (Mcts-Ag/bi2wo6) Composite.

Magnetically Recyclable MoS2/Fe3O4 Hybrid Composite As Visible Light Responsive Photocatalyst with Enhanced Photocatalytic Performance

One-Step Synthesis of Ag2O/Fe3O4 Magnetic Photocatalyst for Efficient Organic Pollutant Removal via Wide-Spectral-Response Photocatalysis–Fenton Coupling