Abstract:In this study, the cyclic mechanical characters of 316L stainless steel at elevated temperature are extensively investigated by the experimental and cyclic constitutive models. The experiments include the monotonic tensile tests with different loading rates and the low cycle fatigue tests considering the effect of strain amplitudes, strain rates and loading sequences. The evolution of cyclic stress amplitudes, hysteresis loops and elastic modulus under various loading conditions are comprehensively analyzed. The experimental results show that the 316L steel at elevated temperature performs a typical three-stage cyclic mechanical response, i.e., initial hardening, subsequent saturation and final accelerated softening. The cyclic softening in both stiffness and flow stress is mainly caused by the nucleation of micro-voids or micro-cracks, and the subsequent coalesce and propagation. Furthermore, although the nearly rate-independent mechanical behavior is observed at monotonic tensile and first several fatigue cycles due to the DSA effect, the cyclic hardening/softening behavior shows a significant strain-rate and loading history dependence. Finally, inspired by the experimental observations and analyses, a damage-coupled cyclic elastic-viscoplastic constitutive model involving strain-range, strain-rate and loading history dependence is proposed to predict the complex cyclic behaviors of the material at elevated temperature. A hardening factor is incorporated into the Chaboche kinematic hardening equations to model the kinematic-induced hardening behavior. And the plastic strain memory surface and the maximum plastic strain rate are introduced to model the strain-range, strain-rate and loading history dependence of cyclic behavior. The proposed model is proved to effectively describe the complex evolution of not only cyclic stress amplitude but also hysteresis loops for the 316L steel at elevated temperature.

Tensile and Low Cycle Fatigue Response of SS321 at Room Temperature

The low-cycle fatigue, deformation and final fracture behaviour of an austenitic stainless steel

Variation In Mechanical Properties, Microstructures And Fracture Behavior Of 304 Stainless Steel During Low-Cycle Fatigue

Effects of low-cycle fatigue on static mechanical properties, microstructures and fracture behavior of 304 stainless steel

Use of instrumented indentation testing to study local mechanical properties of 304L SS welded joints subjected to low-cycle fatigue loadings

A Study of the Back Stress and the Friction Stress Behaviors of Ti-6Al-4V Alloy During Low Cycle Fatigue at Room Temperature

Deformation Mechanisms of Selective Laser Melted 316l Austenitic Stainless Steel in High Temperature Low Cycle Fatigue

Characterization of Low Cycle Fatigue of Ferritic–Martensitic P92 Steel: Effect of Temperature

Evaluation of the High Cycle Fatigue Properties of Double-Side-Welded AISI 321 Plates Using GTAW Process for Pressure Vessels

TENSILE AND LCF PROPERTIES OF AISI 316LN SS AT 300 AND 77 K

Experimental and Numerical Analysis of the Uniaxial Tensile Properties of F321 Austenitic Stainless Steel at Different Temperatures

Effects of temperature on the low cycle fatigue behaviour of nitrogen alloyed type 316L stainless steel

Cyclic hardening/softening behavior of 316L stainless steel at elevated temperature including strain-rate and strain-range dependence: Experimental and damage-coupled constitutive modeling

Low cycle fatigue behavior of 316LN stainless steel: Effects of temperature, strain rate and strain amplitude

The Low-Cycle Fatigue Behavior, Microstructure Evolution, and Life Prediction of SS304: Influence of Temperature

Investigation of Low-Cycle Fatigue Behavior of Austenitic Stainless Steel for Cold-Stretched Pressure Vessels

Effect of hold-time on low cycle fatigue behaviour of nitrogen bearing 316L stainless steel

Prediction of Fracture Resistance from Tensile Properties and Validation with Experimental Data for 316 Type Stainless Steels

Effects of temperature and strain amplitude on low-cycle fatigue behavior of 12Cr13 martensitic stainless steel

Study of Low-Cycle Fatigue of AL6XN Austenitic Stainless Steel

Experimental and constitutive modelling studies of type 316L stainless steel based on internal stress under low cycle fatigue and creep-fatigue interaction