Abstract:Quantum cascade lasers (QCLs) in the mid-infrared (MIR) hold significant potential for widespread applications in both military and civilian contexts. However, the utility of present single-chip QCLs is hampered by issues such as low output power and subpar beam quality. This study addresses these limitations by employing spectral beam combining (SBC) based on a diffraction grating, with an aim to enhance both power and beam quality of MIR QCLs. Coaxial power synthesis of three single-chip QCLs (around 4.75 μm) is achieved experimentally, importantly, the beam quality did not decrease after combining, essentially maintaining the same quality as before combining. It is proposed that there are four main factors affecting the combining efficiency, namely operating optical power (or driving current) of the chips, individual differences in QCL chips, diffraction grating, and reflectivity of feedback mirror, and their effects on the combining efficiency are discussed separately. This study confirms that SBC is an effective way to obtain high-power and high-beam quality MIR QCL sources, and lays a research foundation for more beam spectral combining.

Physical model and analysis of spectral beam combining system with dual-grating external cavity

Design of a Beam-coupling System for a Chip-integrated Spectrometer with a Discrete Linear Waveguide

Comparison of spectral beam combining characteristic based on plane and concave gratings

Design of Off-angle Beaming Device Based on Subwavelength Metal Thin Film Microstructure

Beam Wavefront Dynamical Compensation by Aberrations of the Gain Medium in Laser Amplifiers for Beam Quality Improvement.

Tunable Beam Splitter Using Bilayer Geometric Metasurfaces in the Visible Spectrum.

Polarization-separated feedback spectral beam combining source

Spectral Beam Combining of Fiber Lasers with 32 Channels

Designing and Optimizing Highly Efficient Grating for High-Brightness Laser Based on Spectral Beam Combining

Ultimate efficiency of spectral beam combining by volume Bragg gratings

High-efficiency simulation of coherent beam combining using a scaled angular spectrum method

Research on mid-infrared quantum cascade lasers spectral beam combining

Improving the beam quality of single-grating spectrally combined fiber lasers with adaptive optics

Characterization of Dual-Periodic Structures with Optical Scattering

Spectral beam combining of discrete quantum cascade lasers

Single-mode Fiber Auto-Coupling System with Wedges

Simulation Method for Analyzing Mechanical Long-Period Fiber Gratings under High Birefringence

Stray Light Analysis And Calculation Modeling Of Optical System

Finite Element Thermal Analysis of Optical Elements in a Laser Incoherent Space Beam Combiner

Spatial Frequency Analysis of Beam Smoothing Performance Realized by the Diffractive Optical Element and the Smoothing by Spectral Dispersion Technique

Numerical simulation of coherent beam combining of large-array fiber lasers via Zernike's phase-contrast