Abstract:Ammonia, as a carbon-free, hydrogen-rich and renewable fuel, is of great significance for building the zero- carbon emission energy supply system in the word. However, the drawbacks of high ignition energy and high NOx emissions limit its widespread application. Catalytic combustion provides a reliable option for NH3 combustion. In the study, the catalyst of Ag/CuOx@SiO2 catalyst with high-temperature catalytic activity was prepared, and the catalytic flow reactor was employed to evaluate the ability of the catalyst in enhancing NH3 oxidation and removal NOx during NH3-rich combustion with high temperature region (900 K similar to 1400 K) and wide equivalence ratio range (0.4 similar to 1.2). The high-temperature catalytic activity of the catalyst was proved by XPS spectrogram that the valence states of Ag and CuOx species in the catalyst have not been changed after the catalytic combustion. The results of catalytic combustion indicated that the catalyst enhanced the NH3 oxidation significantly. Compared to NH3 combustion, the temperature of 100 % NH3 conversion (T100) was decreased by over 500 K during NH3 catalytic combustion. Moreover, catalytic combustion performed higher efficiency on enhancing NH3 oxidation than the approach of co-firing NH3 with higher reactive gas fuels. The T-100 of NH3 catalytic combustion was lower by 200 K similar to 220 K than that of NH3/H-2 and NH3/CH4 combustion. Furthermore, the catalyst reduced the NOx effectively during NH3/H-2 and NH3/CH4 combustion. At 1400 K, NO selectivity during NH3/H-2 and NH3/CH4 catalytic combustion reduced by 86.80 %similar to 90.42 % and 43.61 %similar to 61.42 % compared to the combustion, respectively. Additionally, the peak of N2O selectivity moved to lower temperature range during catalytic combustion. Especially in stoichiometric and fuel rich conditions, the peak temperature reduced by 100 K similar to 200 K. The study provided references for the development of catalysts in ammonia-rich fuel catalytic combustion.

Enhancing the performance of catalysts in turbulent premixed fuel-lean hydrogen/air combustion

Effective Hydrogen Production from Partial Oxidation of Propane over Composite Ni/Al2O3-SiC Catalyst

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

The effect of hydrogen addition on methane-air flame in a stratified swirl burner

Combustion of Hydrogen-Air in Micro Combustors with Catalytic Pt Layer

Photothermal Catalyst Engineering: Hydrogenation of Gaseous CO2 with High Activity and Tailored Selectivity

A Highly Efficient Catalytic Co-Combustion of Aromatic and Oxygenated Volatile Organic Compounds (VOCs) via H2-Driven Onsite Heating

Experimental study of low-temperature combustion performance in hydrogen/air mixtures over Pt–Cu/HZSM-5/cordierite bimetallic catalysts

Effect Of Surface Catalytic Reaction On Homogeneous Premixed Combustion

Elementary Reaction Modeling and Experimental Characterization on Methane Partial Oxidation within a Catalyst-Enhanced Porous Media Combustor

Promotional Effect of the Periodic Rich and Lean Switching on the Performance of Three-Way Catalysts and Influence of Metal Zone-Coating

Methane/Air Fuel-Rich Combustion in a Catalyst Enhanced Two-Layer Porous Media Burner

Support effects on catalytic performance for selective combustion of hydrogen in the presence of propene

Ammonia Decomposition Coupled with Methane Combustion in Catalytic Microreactors for Hydrogen Production

Improving the NH3 Oxidation and Removing NOx During Ammonia-Rich Fuel Catalytic Combustion Using the Ag/CuOx@SiO2 Catalyst with High-Temperature Catalytic Activity

Catalytically Enhanced Methane-Rich Combustion by Porous Media Reactor

Effects of Hydrogen Addition on the Catalytic Oxidation of Carbon Monoxide over Platinum at Power Generation Relevant Temperatures

The Suitability of the Three-way Catalyst for Hydrogen Fuelled Engines

Effect of a palladium catalyst and initial pressure on methane-air catalytic combustion process in a helical coil microchannel: A molecular dynamics approach

Lean Methane Premixed Combustion over a Catalytically Stabilized Zirconia Foam Burner

Experimental and modelling studies of the catalytic combustion of methane