Abstract:This paper presents the results of a study on removal of Pb 2+ ions by using hydroxyapatite (HAP) scaffold prepared by replication method. To this aim, the effects of suspension solid content and polymeric foam density on the properties of ceramic foam were investigated. The mean total porosity and apparent porosity of the optimized scaffolds were 92.67 % and 92.04 %, respectively. The Taguchi method was performed for designing batch experiments by considering three controllable variables, namely: (1) initial pH of the solution, (2) initial concentration of Pb 2+ ions (C 0 ), and (3) circulating rate of the solution (Ǭ), on the removal efficiency of Pb 2+ ions as the response. Based on the obtained results from the ANOVA analysis, the removal efficiency of Pb 2+ ions was mainly affected by the initial pH of the solution (90.88 %). The highest removal efficiency (99.1 %) of Pb 2+ ions was obtained by optimizing the process under operating conditions of pH = 3.5, C 0 = 50 mg.L −1 , and Ǭ= 0.5 L.min −1 . The Langmuir isotherm model with good accuracy was fitted to the equilibrium results, and the maximum adsorption capacity of 106.38 mg.g −1 was predicted for the HAP scaffold adsorbent. Kinetic studies showed that the mass transfer diffusion steps in the external film and inside the pores are fast, being the adsorption on the adsorbent sites the rate-limiting step of the kinetics, what is plausible given the high porosity of the material. Also, the primary mechanism for Pb 2+ adsorption using HAP scaffold adsorbents was found to be dissolution-precipitation. The fixed-bed column adsorption experiments performed under the predicted optimum conditions of batch experiments. In comparison to the powder adsorbents tested in fixed-bed column, this adsorbent presents several advantages. These include the elimination of the requirement for mechanical separation of the shaped adsorbent from the solution after adsorption, prevention of bed clogging, and its high surface area derived from interconnected open pores.

Kinetic and isotherm adsorption studies of Zn (II) ions on hydroxyapatite nanoparticles: Linear and nonlinear analyses

Adsorption of Pb (II) Ions onto Hydroxyapatite Nanopowders in Aqueous Solutions

REMOVAL OF AQUEOUS Cu(II) WITH NATURAL KAOLIN: KINETICS AND EQUILIBRIUM STUDIES

Preparation of hydroxyapatite nanostructures with different morphologies and adsorption behavior on seven heavy metals ions

Adsorption of Fe 3+ Ions from Aqueous Solution by Natural and Synthetic Apatites: Kinetic, Equilibrium and Thermodynamic Study

Purification Behavior of Zn(II) in Water by Magnesium Hydroxyapatite: Surface Complexation, and Dissolution–Precipitation

Physicochemical studies toward the removal of Zn(II) and Pb(II) ions through adsorption on montmorillonite-supported zero-valent iron nanoparticles

Effective adsorption and removal of industrial dye from aqueous solution using mesoporous zinc oxide nanoparticles via metal organic frame work: equilibrium, kinetics and thermodynamic studies

Adsorption mechanism and modeling of radionuclides and heavy metals onto ZnO nanoparticles: a review

Optimization of the adsorption of lead (II) by hydroxyapatite using a factorial design: Density functional theory and molecular dynamics

Removal of cadmium(II) from aqueous solution by hydroxyapatite-encapsulated zinc ferrite (HAP/ZnFe2O4) nanocomposite: kinetics and isotherm study

Effects of low-molecular-weight organic acids on Cu(II) adsorption onto hydroxyapatite nanoparticles.

Two–three parameters isotherm modeling, kinetics with statistical validity, desorption and thermodynamic studies of adsorption of Cu(II) ions onto zerovalent iron nanoparticles

Studies on elimination of nutrients from aqueous effluents using ZnO nanoparticles: the case of ammonium as a model. Experimental and theoretical insights

Surface and mass transfer kinetic and equilibrium modeling of Pb(II) ions adsorption on hydroxyapatite scaffold: Batch and fixed-bed column studies

Enhanced Adsorption of Zn(II) Onto Graphene Oxides Investigated Using Batch and Modeling Techniques

Application of ZnO nanorods as an adsorbent material for the removal of As(III) from aqueous solution: kinetics, isotherms and thermodynamic studies

Synthesis and Characterization of Zinc Oxide Nanoparticle Anchored Carbon as Hybrid Adsorbent Materials for Effective Heavy Metals Uptake from Wastewater

Nickel and cobalt adsorption on hydroxyapatite: a study for the de-metalation of electronic industrial wastewaters

Adsorption of Pb2+ using biosynthesized ZnO nanoparticles derived using Azadirachta indica (neem) leaf extract

Research on adsorption – desorption the ability of hydroxyapatite for Co2+ ions and recovery cobalt by electrochemical deposition