Abstract:The process of in-situ oil shale extraction via convection heating is accompanied by complex solid–fluid-thermal-mass transfer multi-field coupling effects. As the fluid temperature increases, thermal cracking and pyrolysis occur within the oil shale, forming a highly permeable and porous structure, resulting in the oil shale being subjected to complex stress field changes. This paper, set against the background of the in-situ oil shale extraction process using steam injection, conducts uniaxial compression tests on oil shale under different bedding directions under the real-time action of high-temperature steam. Combined with micro-CT, XRD and XPS analysis of oil shale, the characteristics of anisotropic evolution of compressive strength of oil shale under the real-time action of high-temperature steam and the internal mechanisms occurring are clarified. As the steam temperature increases, the compressive strength and elastic modulus of oil shale in different bedding directions show a trend of decreasing and then increasing, reaching their lowest values at a steam temperature of 400 °C. The rate of change in compressive strength of oil shale perpendicular and parallel to the bedding direction differs significantly at different pyrolysis stages. When the steam temperature exceeds 400 °C, the rate of increase in compressive strength of oil shale in the vertical bedding direction is significantly higher than in the parallel bedding direction. At high temperatures, the fracturing of oil shale is primarily along the bedding planes, while the development of interlayer fractures is relatively slow, resulting in higher strength of oil shale in the vertical bedding direction. The failure characteristics of oil shale perpendicular to the bedding direction transition from brittle shear fracturing to semi-brittle shear fracturing and then to plastic deformation, eventually returning to semi-brittle shear fracturing. In contrast, the failure characteristics of oil shale parallel to the bedding direction transition from brittle shear fracturing through semi-brittle shear fracturing to plastic deformation. During pyrolysis process, the content of clay minerals inside the oil shale does not change significantly, but the change in non-clay minerals is most pronounced. When the temperature exceeds 400 °C, the diffraction-peak intensity of pyrite suddenly decreases or even disappears, the diffraction-peak intensity of kaolinite gradually decreases, and the content changes of elements such as C, O, Al, Si are also more noticeable. The transformation of internal mineral composition in oil shale (e.g., the conversion of kaolinite to metakaolinite) is the fundamental reason for the strength increase of oil shale at temperatures above 400 °C.

Real-time imaging of oil shale pyrolysis dynamics at nanoscale via environmental scanning electron microscopy

Dynamic Imaging of Oil Shale Pyrolysis Using Synchrotron X‐ray Microtomography

4D in situ synchrotron X-ray tomographic microscopy and laser-based heating study of oil shale pyrolysis

Microstructural Imaging and Characterization of Oil Shale Before and after Pyrolysis

Multi-scale multi-dimensional microstructure imaging of oil shale pyrolysis using X-ray micro-tomography, automated ultra-high resolution SEM, MAPS Mineralogy and FIB-SEM

CT Imaging to Study Meso-Structure Evolution of Fractured Oil Shale During In-Situ Pyrolysis by High-Temperature Water Vapor Injection

Thermo-hydro-mechanical Coupling in Oil Shale: Investigating Permeability and Heat Transfer under High-Temperature Steam Injection

Evaluation of the porous structure of Huadian oil shale during pyrolysis using multiple approaches

Numerical Simulation of in Situ Exploitation of Oil Shale by Injecting High-Temperature Steam

Simulation of In-Situ Steam-Driven Oil Seepage in Single-Fracture Oil Shale CT Digital Cores after Pyrolysis at Different Temperatures

Real-time Monitoring of the Oil Shale Pyrolysis Process Using a Bionic Electronic Nose

A Comprehensive Analysis of the Pyrolysis Effects on Oil Shale Pore Structures at Multiscale Using Different Measurement Methods

An Investigation on the Pyrolysis of Low-Maturity Organic Shale by Different High Temperature Fluids Heating

Study on the pore evolution of Xinjiang oil shale under pyrolysis based on joint characterization of LNTA and MIP

Influence of in Situ Pyrolysis on the Evolution of Pore Structure of Oil Shale

Pore and Fracture Scale Characterization of Oil Shale at Different Microwave Temperatures

Operando scanning electron microscopy platform for in situ imaging of fluid evolution in nanoporous shale

Nanoscale MOF-catalyzed pyrolysis of oil shale and kinetic analysis

A Multi-Step Kinetics Study on Chang-7 Shale Pyrolysis: Impact of Shale Inherent Minerals

Research on the Mechanical Properties and Anisotropy Evolution of Uniaxial Compression of Oil Shale Under Real-Time High-Temperature Steam

Fates of Pyrolysis Oil Components in the Non-Isothermal Propped Fractures During Oil Shale in Situ Pyrolysis Exploitation