Abstract:The thickness of steel plates used in the member has gradually increased to meet the load-bearing capacity requirements of long-span steel bridges. As the primary connection method of thick steel plate, welding will result in considerable welding residual stress with complex distribution. Large welding residual stress will significantly impact the performance of steel bridges. In this paper, the distribution of residual stress in welded thick steel plate is systematically studied, a specimen with a thickness of 80 mm was designed and fabricated, and the welding residual stress was measured by X-ray diffraction. The finite element model was established and verified by test results. Subsequently, the finite element calculation of the welding residual stress of steel plates with thicknesses of 20, 40, 60, 80, and 100 mm was carried out, and the distribution of surface residual stress and the influence of plate thickness on residual surface stress were studied; then the spatial evolution mechanism of welding residual stress was studied, and the distribution of residual stress inside steel plate and the influence of plate thickness on the distribution of residual stress were revealed. The results show that the surface and internal residual stresses of 20–100 mm thick plates have good symmetry on the paths perpendicular to the weld seam, and asymmetry only occurs in the weld seam and heat-affected zone where the stress fluctuates. On the paths perpendicular to the weld seam, the stress in the X direction transitions from the "M" shape distribution on the surface to the "Π" shape distribution inside for 20–40 mm thick plates, and the residual stress near the weld seam gradually changes from compressive to tensile; The distribution of stress in the X direction in the 80–100 mm thick plate has experienced the transition from "M" shape to "Π" shape to "M" shape, and the stress near the weld seam has experienced the transition from compressive to tensile to compressive. The stress change in the X direction of the 60 mm thick plate is between the above two cases. On the path of internal stress along the thickness, the maximum stress in the X direction is 310–400 MPa for 20–40 mm thick plates, which appears at about 1/2 plate thickness. The maximum stress in the X direction for 60–100 mm thick plates is 400–480 MPa, which appears at 0.2–0.3 times the thickness of the plate from the upper surface. The results could serve as a reference for welding residual stress analysis and guide optimization design of steel bridges made of thick steel plate.

Stress and distortion of the 10 mm thick plate EH40 and 316L different butt joints in 10 kW laser welding

Solid phase transformation effects on stress and strain in the thick plate EH40 welded butt joint

Experimental research and numerical analysis of welding residual stress of butt welded joint of thick steel plate

Numerical and experimental study of residual stress in multi-pass laser welded 5A06 alloy ultra-thick plate

Numerical and experimental study on thermal-metallurgical-mechanical behavior of high-strength steel welded joint

Effect of collapse and hump on thermomechanical behavior in high-power laser welding of 16-mm marine steel EH40

Fatigue inhomogeneity of thick 316L stainless steel joints fabricated by ultra-high power laser-MIG hybrid welding

Modeling of welding residual stress in a dissimilar metal butt-welded joint between P92 ferritic steel and SUS304 austenitic stainless steel

Experimental Research of Welding Residual Stress of Butt Welded Joint of Thick Steel Plate

Welding stability and fatigue performance of laser welded low alloy high strength steel with 20 mm thickness

Effects of Welding and Constraint Conditions on the Welding Residual Stress and Hardness of Type 316 Stainless Steel Pipe

Microstructure and Alloy Element Distribution of Dissimilar Joint 316L and EH36 in Laser Welding

Effect of Solid-State Phase Transformation and Transverse Restraint on Residual Stress Distribution in Laser–Arc Hybrid Welding Joint of Q345 Steel

Accurate evaluation on residual stress considering solid-state phase transformation and initial stress in thick weld

Effect of Residual Stress on Hydrogen Diffusion in Flat Butt Welding Joints

Stress evolution mechanisms under different SSPT-related effects during laser welding

Distortion and residual stresses in thick plate weld joint of austenitic stainless steel: Experiments and analysis

Effect of Laser Power on Weld Formability and Residual Stress of Unequal Thickness 410 Ferritic Stainless Steel/RCL540 Low-Carbon Alloy Steel

Stress evolution mechanism during laser welding of ultra-high-strength steel: considering the effects of temperature sensitivity, strain hardening and annealing

Development of microstructure and residual stress in electron beam welds in low alloy pressure vessel steels

Effect of different welding parameters on residual stress and deformation of 20/0Cr18Ni9 dissimilar metal arc-welding joint