Abstract:Fouling control strategies play a crucial role in membrane distillation (MD) process, primarily due to the significant limitation of fouling during the scaling-up process. The utilization of microbubbles (MBs) aeration has exhibited promising potential in mitigating membrane fouling when treating high salinity wastewater. Aeration can introduce gas-liquid two-phase flow on the membrane surface, thereby increasing the membrane surface shear force. The mechanism of aeration technology for controlling fouling includes the following points: introduction of gas-liquid two-phase flow; physical substitution of concentration polarization layer; pressure pulses caused by bubbles flowing through the membrane surface and increasement of the cross flow velocity. This research aims to optimizing the effect of air MBs with different concentrations and sizes introduced in the feed side on membrane fouling control, we creatively used the method of releasing pressure gradiently to achieve size regulation of MBs within a certain range for the first time, firstly regulated the generation of MBs by manipulating gas flow rate and release pressure. Under the optimal condition of 40 mL/min and 0.6 MPa, it will yield concentration of 1.58 × 10 4 /mL and D50 Sauter size of 64.69 μm MBs with pure water permeance flux of 12.32 kg/(m 2 ·h). It was observed that higher gas flow rates primarily increased MBs concentration, while lower pressures predominantly reduced MBs size through the method of inline imaging. Experimental results indicated that introduction of MBs can slightly improve the temperature polarization coefficient and mass transfer coefficient under different operating modes. Consequently, further investigations focused on the influence of MBs characteristics on different fouling control. All conditions reach 99 % rejection for inorganic salt and HA. This study provided empirical evidence that higher concentration and larger size of MBs intensify the gas-liquid two-phase flow disruption and exhibit a better shear effect on scaling phenomena, which yield advantageous outcomes in terms of augmenting permeance flux and water vapor production, with permeance flux increased from 40.12 % to 55.42 % for inorganic fouling and increased from 68.35 % to 80.15 % for inorganic and HA fouling. These results were confirmed via membrane surface using scanning electron microscopy and energy dispersive spectroscopy. In summary, this research aided in identifying appropriate operating conditions for mitigating inorganic and composite scaling by implementing air-infused MBs in direct contact membrane distillation (DCMD), which provides scientific and technical guidance for controlling fouling in MD in practical applications.

Performance enhancement for membrane distillation by introducing insoluble particle fillers in the feed

Optimizing Membrane Distillation Performance through Flow Channel Modification with Baffles: Experimental and Computational Study

Distillation performance in a novel minichannel membrane distillation device

Improved Ultrafiltration Performance Through Dielectric Barrier Discharge/sulfite Pretreatment: Effects of Water Matrices and Mechanistic Insights

A novel braided structure with enhanced feed flow state for hollow fiber air-gap membrane distillation performance improvement

Optimizing fouling mitigation in membrane distillation by controlled microbubble size and concentration

Effect of on the Membrane Distillation of PVDF Membrane Material Enhanced by Gas-Liquid Two-Phase Flow

Fractionation and Flux Decline Studies of Surface-Patterned Nanofiltration Membranes Using NaCl-glycerol-BSA Solutions

Enhancing the perm-selectivity of thin-film nanocomposite membranes intercalated with cyclodextrin-chelated Metal-Organic Framework via modulated interfacial polymerization

A Novel Delayed Phase Inversion Strategy Enables Green PVDF Membranes for Membrane Distillation

Liquid-like surface modification for effective anti-scaling membrane distillation with uncompromised flux

Comparative study of anti-scaling performance in membrane distillation: Membrane spacer vs. patterned module vs. patterned membrane

Understanding flow dynamics in membrane distillation: Effects of reactor design on polarization

Preparation and characterization of ZIF-8 and ZIF-67 engineered PVDF mixed-matrix membranes: Stability enhancement in pervaporation study

Simulation Study on Direct Contact Membrane Distillation Modules for High-Concentration NaCl Solution

Preparation and modification of PVDF membrane via VIPS method for membrane distillation

A Facile Method to Control Pore Structure of PVDF/SiO2 Composite Membranes for Efficient Oil/Water Purification

Improved PVDF Membrane Performance by Doping Extracellular Polymeric Substances of Activated Sludge

Synergy of feed-side aeration and super slippery interface in membrane distillation for enhanced water flux and scaling mitigation

Synergistically Controlling Biofouling and Improving Membrane Module Permeability by Using Simultaneously Structurally Optimized and Surface Modified Feed Spacers

Enhancing the Permeate Flux Improvement of Direct Contact Membrane Distillation Modules with Inserted S-Ribs Carbon-Fiber Filaments