NH2-MIL-125-Derived N-Doped TiO2@C Visible Light Catalyst for Wastewater Treatment

Wenbin Wang,Wei Qiang,Chuntao Chen,Dongping Sun

DOI: https://doi.org/10.3390/polym16020186

IF: 5

2024-01-09

Polymers

Abstract:The utilization of titanium dioxide (TiO2) as a photocatalyst for the treatment of wastewater has attracted significant attention in the environmental field. Herein, we prepared an NH2-MIL-125-derived N-doped TiO2@C Visible Light Catalyst through an in situ calcination method. The nitrogen element in the organic connector was released through calcination, simultaneously doping into the sample, thereby enhancing its spectral response to cover the visible region. The as-prepared N-doped TiO2@C catalyst exhibited a preserved cage structure even after calcination, thereby alleviating the optical shielding effect and further augmenting its photocatalytic performance by increasing the reaction sites between the catalyst and pollutants. The calcination time of the N-doped TiO2@C-450 °C catalyst was optimized to achieve a balance between the TiO2 content and nitrogen doping level, ensuring efficient degradation rates for basic fuchsin (99.7%), Rhodamine B (89.9%) and tetracycline hydrochloride (93%) within 90 min. Thus, this study presents a feasible strategy for the efficient degradation of pollutants under visible light.

polymer science

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop an efficient visible - light catalyst for the degradation of organic pollutants in wastewater treatment. Specifically, the researchers prepared N - doped TiO₂@C composites using NH₂ - MIL - 125 as a template by in - situ calcination method and optimized the preparation conditions, especially the calcination temperature, in order to achieve efficient degradation of typical organic pollutants such as basic fuchsin, rhodamine B and tetracycline hydrochloride under visible light.

### Main problems
1. **Improve the visible - light response ability of TiO₂**:
- As a commonly used photocatalyst, TiO₂ can only absorb ultraviolet light due to its large band gap (3.2 eV), which accounts for about 5% of the solar spectrum. This limits its application efficiency under visible light. Therefore, the researchers narrowed the band gap of TiO₂ through N - doping to enhance its absorption ability of visible light.

2. **Improve the separation efficiency of photogenerated electron - hole pairs**:
- During the catalytic process, the rapid recombination of photogenerated electron - hole pairs reduces the light utilization rate of TiO₂, thus affecting its degradation efficiency of organic pollutants. Through N - doping and carbon coating, the researchers aim to improve the separation efficiency of photogenerated electron - hole pairs, thereby enhancing the photocatalytic performance.

3. **Optimize the structure and morphology of the catalyst**:
- By controlling the calcination temperature, the researchers optimized the structure and morphology of the N - doped TiO₂@C composites, making them maintain a porous structure, increasing the contact area with pollutants, and further improving the photocatalytic activity.

### Solutions
1. **N - doping**:
- Through the pyrolysis process of NH₂ - MIL - 125, the nitrogen element is released from the organic linker and doped into TiO₂, narrowing the band gap and enhancing the visible - light response ability.

2. **Carbon coating**:
- The presence of the carbon skeleton not only maintains the morphological advantages of MOF but also restricts the aggregation of TiO₂ nanocrystals, improving the electrical conductivity and photocatalytic performance of the composites.

3. **Optimize the calcination temperature**:
- By systematically studying the performance of samples at different calcination temperatures, the researchers determined that 450°C is the optimal calcination temperature. At this time, the N - doped TiO₂@C composites exhibit the highest photocatalytic efficiency, and the degradation rates of basic fuchsin, rhodamine B and tetracycline hydrochloride reach 99.7%, 89.9% and 93% respectively.

### Conclusion
This study successfully prepared N - doped TiO₂@C composites and significantly improved their photocatalytic performance under visible light by optimizing the calcination temperature. This result provides a feasible strategy for efficiently treating organic pollutants in wastewater.