Abstract:The exploitation of refractory iron ores has become increasingly important around the world because of the rapid depletion of easy-to-process iron ores. Ironsand is extensively distributed in the coastal areas of Indonesia, China, and New Zealand, and can provide an alternative to conventional iron ores. Although the composition of ironsand is partially dependent on its location and position, it approximates that of titanomagnetite (Fe3-xTixO4) containing ~ 60% total Fe (TFe). However, the conventional smelting route for smelting beach titanomagnetite concentrate with carbon uses a blast furnace to produce pig iron and titanium slag, which has many disadvantages. First, the smelting process requires lots of coke and a high temperature. Second, sinter blend allows for the addition of only a small amount of beach titanomagnetite concentrate to ensure the desired sintering characteristics. Therefore, in order to efficiently utilize beach titanomagnetite, the processes of direct reduction followed by magnetic separation are generally applied to recover iron. In addition, additives such as CaO, CaCO3, and NaCO3 are often used in the reduction roasting process. These additives may improve the reduction characteristics or facilitate the growth of iron particles to some extent. In order to study the effect of the additive CaO on the direct reduction and magnetic separation of beach titanomagnetite concentrate which contains 58.58% of TFe and 12.04% of TiO2, the mechanisms were investigated by gas composition of CO and CO2, gasification rate of total reaction, CO partial pressure, metallization rate, mineral composition and so on. The results indicate that adding CaO can improve the gasification rate of reductant and facilitate the reduction of titanomagnetite, which improves the generation of CO2 gas and decreases the CO partial pressure. Besides, CaO can participate in solid-solid reaction, reduce FeO content in Ti-containing mineral and facilitate the migration and enrichment of Ti and Fe components, which promote the growth of metallic iron particles. Thus, adding CaO is good for the separation and recovery of Fe and Ti by grinding and magnetic separation.

Using Na 2 CO 3 as an additive to enhance the growth kinetics of iron grains during carbo-thermic reduction of ilmenite concentrate

Isothermal kinetics of carbothermic reduction of ilmenite concentrate with the addition of sodium carbonate

Mechanism of Sodium Carbonate-Assisted Carbothermic Reduction of Titanomagnetite Concentrate

Effect Of Na2so4 On The Embedding Direct Reduction Of Beach Titanomagnetite And The Separation Of Titanium And Iron By Magnetic Separation

Isothermal reduction and nitridation kinetics of ilmenite concentrate in ammonia gas

Non-isothermal Reduction Kinetics of Iron During Vacuum Carbothermal Reduction of Ilmenite Concentrate

Carbothermic reduction of vanadium titanomagnetite with the assistance of sodium carbonate

Promoting the Reduction Reactivity of Ilmenite by Introducing Foreign Ions in Chemical Looping Combustion

Effect of Na 2 CO 3 and CaCO 3 on coreduction roasting of blast furnace dust and high-phosphorus oolitic hematite

Reduction kinetics of foreign-ion-promoted ilmenite using carbon monoxide (CO) for chemical looping combustion

Effect of additives on growth of ferronickel grains and metal–slag separation behavior

The Function of Ca(Oh)(2) and Na2co3 As Additive on the Reduction of High-Phosphorus Oolitic Hematite-Coal Mixed Pellets

Effects of H 2 , CO, and a gas mixture on the reduction process of raw and pre-oxidized ilmenite concentrate powders

Effect of CaO on Reducing Atmosphere in the Direct Reduction and Magnetic Separation Process of Beach Titanomagnetite Concentrate

Experimental Study on Strengthening Carbothermic Reduction of Vanadium-Titanium-Magnetite by Adding CaF2

Effect of MgO and CaCO3 As Additives on the Reduction Roasting and Magnetic Separation of Beach Titanomagnetite Concentrate

Improving the production efficiency of high-titania slag in Ti extraction process: fluxing effect on formation of pseudobrookite

High-Titanium Slag Preparation Process by Carbothermic Reduction of Ilmenite and Wet-Magnetic Separation

Kinetics and Mechanism of Red Mud Carbothermic Reduction and Reduced Iron Grain Growth: An Influence of Sodium Sulfate

A Novel Technology for the Refinement of Low-Grade Ilmenite Concentrate