Abstract:Accurate uncertainty quantification (UQ) in digital image correlation (DIC) deformations is essential for quantitative DIC-based finite element (FE) model validation. DIC UQ is well-studied in the current literature, both from a theoretical as well as experimental point-of-view, but rarely from the model validation perspective. Moreover, the DIC uncertainties are usually considered as spatial averages over the whole field of view while local contrast variations generally lead to spatially-varying noise floors. This paper investigates how DIC UQ should be performed when validating FE models. UQ was performed using experimental stationary images of a test sample. Spatial maps of point-wise temporal standard deviation (noise) and mean (bias) were constructed to be used in the model validation process. The effectiveness of reference image averaging at reducing bias and noise was also studied. Specular reflection ('hotspots') was given special attention, an important additional source of uncertainty not simulated by the Digital Twin (DT) used to perform the validation. As expected, image noise was found to be the most dominant source of DIC uncertainty. The spatially-random noise on the reference stationary image was found to be responsible for the temporal bias of the displacement distribution, as the copy of noise from that initial image affects all displacement maps since this image is used for all displacement maps. Spatially-random noise on the deformed stationary images was found to be responsible for the temporal standard deviation (noise). Both temporal noise and bias were found to be comparable in magnitude, highlighting the necessity for a spatially heterogeneous model validation criterion that accounts for both. The impact of specular reflection was difficult to quantify and exhibits potential for significantly increasing DIC uncertainties. The use of polarized lights and polarizing filters can mitigate this issue but more work is needed to allow for a realistic error budget to be established for this. Heat haze (refraction from warm air flow between camera and object) and camera heating are additional effects that are difficult to error-budget for. Finally, the effect of stereo-DIC calibration errors needs to be studied further.

A Study of the Influence of Calibration Uncertainty on the Global Uncertainty for Digital Image Correlation Using a Monte Carlo Approach

A Study of the Influence of Calibration Uncertainty on the Global Uncertainty for Digital Image Correlation Using a Monte Carlo Approach

Practical Uncertainty Quantification Guidelines for DIC-Based Numerical Model Validation

Uncertainty Quantification for DIC Displacement Measurements in Industrial Environments

Factorial-Design-Based Uncertainty Analysis for Stereo-Vision Photogrammetry

Random Errors in DIC Caused by Non-Uniform Image Noise

Spatial Uncertainty of Measurement Errors in Digital Image Correlation

Error Evaluation Technique for Three-Dimensional Digital Image Correlation.

Algorithm Analysis and Optimization of a Digital Image Correlation Method Using a Non-Probability Interval Multidimensional Parallelepiped Model

Experimental Analysis of Image Noise and Interpolation Bias in Digital Image Correlation

Calibrating large-FOV stereo digital image correlation system using phase targets and epipolar geometry

On errors of digital image correlation due to speckle patterns

Universal Method Using a Pre-Deformed Reference Subset to Eliminate the Interpolation Bias in Digital Image Correlation

Theoretical estimation of systematic errors in local deformation measurements using digital image correlation

Deformation Measurement of Scaling and Rotation Objects Based on Digital Image Correlation Method with Color Information

User-Independent, Accurate and Pixel-Wise DIC Measurements with a Task-Optimized Neural Network

A Novel Method to Measure Sub-micro Repeatability of the High-Precision Positioning Control System Based on Digital Image Correlation Method

Study on subset size selection in digital image correlation for speckle patterns.

Correction of Scanning Electron Microscope Imaging Artifacts in a Novel Digital Image Correlation Framework

Stereo digital image correlation (3D-DIC) for non-contact measurement and refinement of delta robot arm displacement and jerk

Spatial DIC Errors due to Pattern-Induced Bias and Grey Level Discretization