Abstract:Considerable quantities of Nd-Fe-B magnet wastes are produced every year worldwide. Some Nd-Fe-B magnet wastes in the bulk form, produced during manufacturing, have low coercivity and cannot meet the requirements for applications. Finding an effective way to reuse those wastes by improving the coercivity, without powdering or reproducing process, becomes very important for saving energy and raw materials in manufacture. In this work, the grain boundary diffusion process is carried out on waste Nd-Fe-B sintered magnets by using Pr70Cu30 as a diffusion medium. The effects of diffusion temperature, diffusion time, and annealing time on the magnetic properties of the magnets are investigated. It is found that the coercivity increases when the diffusion temperature increases from 500 to 800 degrees C, the diffusion time increases from 1 to 3 h, or the annealing time increases from 1 to 3 h. By comparing the diffused sample with the simply heat treated sample, we find that the coercivity enhancement by grain boundary diffusion process indeed results from the infiltration of Pr and Cu elements. The coercivity of the magnet increases by 51.9%, from 7.88 kOe (1 Oe = 79.5775 A/m) to 11.97 kOe, after 4-hour diffusion at 800 degrees C followed by 3-hour annealing, with a negligible reduction of remanence B-r, achieving a 99.8% recovery of coercivity compared with the commercial N35 magnet. It is noted that 500 degrees C annealing for 3 h after 800 degrees C diffusion only slightly increases the coercivity by 4.6%, from 11.44 kOe to 11.97 kOe, which indicates that the annealing process after Pr-Cu grain boundary diffusion may be not indispensable. Based on the microstructure analysis, the diffusion of Pr and Cu is confirmed. However, the distributions of Pr and Cu are inhomogeneous within a range of tens of microns near the surface even though the diffusion has spread throughout the magnet. The structure of main phase grains separated by the continuous grain boundary phase is formed after the grain boundary diffusion process while the core-shell structure is not observed, which suggests that the modification of the grain boundary structure is the main reason for the coercivity improvement. Cu element plays an important role in forming continuous grain boundary phase. In addition, the electrochemical corrosion test shows that higher corrosion current is obtained in the diffused magnet than in the original magnet, though the corrosion potential is improved. The reduced corrosion resistance may be related to the increased RE-rich phase content and the formation of continuous grain boundary phase. The present work is of great importance for increasing the production yield of Nd-Fe-B magnets.

Boosting efficiency and oxidation resistance of Pr-Tb-Cu diffusion source for Nd-Fe-B magnets by synergistic modification of Al or Ni

Alloying Pr-Tb-Cu diffusion source with Ni for enhancing both coercivity and corrosion resistance of Nd-Fe-B magnets

Enhancing the grain boundary diffusion efficiency of Tb for Nd-Fe-B magnets using multi-element composite diffusion source

Enhancing the Grain Boundary Diffusion Efficiency of Tb for Nd-Fe-B Magnets Using Dual-Alloy Diffusion Source

Significantly Enhancing the Coercivity of NdFeB Magnets by Ternary Pr-Al-Cu Alloys Diffusion and Understanding the Elements Diffusion Behavior

Microstructure optimization and coercivity enhancement of Nd-Fe-B magnet by double-step diffusion with Pr60Cu20Al20 alloy and Tb metal

The magnetic hardening and exchange-decoupling strengthening of combined diffusion Nd-Fe-B magnet

High coercivity Nd-Fe-B magnet with low Tb concentration by combined diffusion

Magnetic performance and microstructure of NdFeB sintered magnet by diffusing Tb10Pr90-(Cu,Al,Ga) alloys

Optimization of TbAl Grain Boundary Diffusion Sources for Sintered Nd-Fe-B Magnets by Low Cost Nd Substitution for Tb

Microstructure modification and coercivity enhancement of sintered NdFeB magnet by vacuum diffusion 70Tb-20Cu-10Ga (at%) alloys

Optimizing microstructure, magnetic properties and mechanical properties of sintered NdFeB magnet by double alloy method and grain boundary diffusion

Simultaneous enhancement of coercivity and electric resistivity of Nd-Fe-B magnets by Pr-Tb-Al-Cu synergistic grain boundary diffusion toward high-temperature motor rotors

Microstructure Optimization and Coercivity Enhancement of Sintered NdFeB Magnet by Grain Boundary Diffusion of Multicomponent Tb60Pr10Cu10Al10Zn10 Films

Modifying Tb-Cu grain boundary diffusion behavior in Nd-Fe-B magnets by Gd or other rare earth elements

Grain boundary diffusion efficiency of sintered Nd-Fe-B magnets by Al, Sn and Zn addition

Coercivity Enhancement of Sintered Nd-Fe-B Magnets by Diffusing TbHx and Tb86Al7Co7 Alloy

Efficient co-diffusion of Tb and Co in a sintered Nd-Fe-B magnet by low-melting point alloys

Restoring and enhancing the coercivity of waste sintered (Nd,Ce,Gd)FeB magnets by direct Pr–Tb–Cu grain boundary diffusion

Dy-based Dual-Alloy Grain Boundary Diffusion for Sintered Nd-Fe-B Magnets with Improved Magnetic Performance and Corrosion Resistance

Coercivity enhancement of waste Nd-Fe-B magnets by Pr70Cu30 grain boundary diffusion process