Abstract:Na4Fe3(PO4)2(P2O7) (NFPP) is regarded as a promising cathode material for sodium-ion batteries (SIBs) owing to its low cost, easy manufacture, environmental purity, high structural stability, unique three-dimensional Na-ion diffusion channels, and appropriate working voltage. However, for NFPP, the low conductivity of electrons and ions limits their capacity and power density. The generation of NaFeP2O7 and NaFePO4 inhibits the diffusion of sodium ions and reduces reversible capacity and rate performance during the manufacturing process in synthesis methods. Herein, we report an entropy-driven approach to enhance the electronic conductivity and, concurrently, phase purity of NFPP as the superior cathode in sodium-ion batteries. This approach was realized via Ti ions substituting different ratios of Fe-occupied sites in the NFPP lattice (denoted as NTFPP-X, T is the Ti in the lattice, X is the ratio of Ti-substitution) with the configurational entropic increment of the lattice structures from 0.68 R to 0.79 R. Specifically, 5% Ti-substituted lattice (NTFPP-0.05) inducing entropic augmentation not only improves the electronic conductivity from 7.1 × 10-2 S/m to 8.6 × 10-2 S/m but also generates the pure-phase of NFPP (suppressing the impure phases of the NaFeP2O7 and NaFePO4) of the lattice structure, which is validated by a series of characterizations, including powder X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT). Benefiting from the Ti replacement in the lattice, the optimal NTFPP-0.05 composite shows a high first discharge capacity (118.5 mAh g-1 at 0.1 C), superior rate performance (70.5 mAh g-1 at 10 C), and excellent long cycling life (1200 cycles at 10 C with capacity retention of 86.9%). This research proposes a new entropy-driven approach to improve the electrochemical performance of NFPP and reports a low-cost, ultrastable, and high-rate cathode material of NTFPP-0.05 for SIBs.

A facile Ball-Milling preparation strategy of Nitrogen-Doped carbon coated Na4Fe3(PO4)2P2O7 Nano-Flakes with superior sodium ion storage performance

Activating the Inert Na1 Sites in Na<sub>2</sub>FePO<sub>4</sub>F Toward High Performance Sodium Storage

F and Si Dual-Doping Induced Oxygen Vacancies in a Na4Fe3(PO4)2P2O7 Cathode Enables Boosting Electrochemical Performance for Sodium Storage

Achieving Fast and Stable Sodium Storage in Na4Fe3(PO4)2(P2O7) via Entropy Engineering

Entropy-Enhanced Multi-Doping Strategy to Promote the Electrochemical Performance of Na4Fe3(PO4)2P2O7

Robust iron-based cathode for ultralong-lasting Na-ion battery with a wide operation-temperature

Entropy-Driven Enhancement of the Conductivity and Phase Purity of Na4Fe3(PO4)2P2O7 as the Superior Cathode in Sodium-Ion Batteries

Zero-strain Co-doped Na2FeP2O7/carbon Delivers Superior Rate Capability and Long-Cycle Stability for Sodium Ion Batteries

Enhanced Silicon Diphosphide-Carbon Composite Anode for Long-Cycle, High-Efficient Sodium Ion Batteries

Mn-doped Na4Fe3(PO4)2(P2O7) facilitating Na+ migration at low temperature as a high performance cathode material of sodium ion batteries

Structural modulation of Na4Fe3(PO4)2P2O7 via cation engineering towards high-rate and long-cycling sodium-ion batteries

Large Scalable Preparation of Ti-Doped Na 4 Fe 3 (PO 4 ) 2 P 2 O 7 as Cathode Material for High Rate and Long-Life Sodium-Ion Batteries

Robust NASICON-type iron-based Na4Fe3(PO4)2(P2O7) cathode for high temperature sodium-ion batteries

Na4Fe3(PO4)2(P2O7)@C/Ti3C2Tx Hybrid Cathode Materials with Enhanced Performances for Sodium-Ion Batteries

Solid-State Synthesis of Na4Fe3(PO4)2P2O7/C by Ti-Doping with Promoted Structural Reversibility for Long-Cycling Sodium-Ion Batteries.

Rapid mechanochemical synthesis of high-performance Na4Fe2.94Al0.04(PO4)2(P2O7)/C cathode material for sodium-ion storage

A Scalable Approach to Na 2 FeP 2 O 7 @Carbon/Expanded Graphite as a Low‐Cost and High‐Performance Cathode for Sodium‐Ion Batteries

Mo-Doped Na4Fe3(PO4)2P2O7/C Composites for High-Rate and Long-Life Sodium-Ion Batteries

Experimental and theoretical investigation of cobalt and manganese substitution in Na4Fe3(PO4)2P2O7 as a high energy density cathode material for sodium-ion batteries

Toward high-performance sodium storage cathode: Construction and purification of carbon-coated Na3V2(PO4)2F3 materials

Prilling and Coating Strategy to Synthesize High-Performance Spherical NaNi0.4Fe0.2Mn0.4O2 Cathode Materials for Sodium Ion Batteries