Abstract:Direct air capture (DAC) can be used to decrease the CO2 concentration in the atmosphere, but this requires substantial energy consumption. If residual waste carbon (in the form of bicarbonate solution) from DAC can be directly reused, it might present a novel method for overcoming the aforementioned challenges. Electrochemical CN coupling methods for synthesizing urea have garnered considerable attention for waste carbon utilization, but the carbon source is high-purity CO2. No research has been conducted regarding the application of bicarbonate solution as the carbon source. This study proposes a proof-of-concept electrochemical CN coupling process for synthesizing urea using bicarbonate solution from DAC as the carbon source and nitrate from wastewater as the nitrogen source. These results confirmed the feasibility of synthesizing urea using a three-electrode system employing TF and CuInS2/TF as the working electrodes via potentiostatic electrolysis. Under the optimal conditions (initial pH 5.0 and applied potential of -1.3 V vs. Ag/AgCl), the urea yield after 2 h of electrolysis reached 3017.2 μg h-1 mgcat.-1 and an average Faradaic efficiency of 19.6 %. The in-situ attenuated total reflection surface-enhanced infrared absorption spectroscopy indicated a gradual increase in the intensity of the -CONH bond signal on the surface of the CuInS2/TF electrode as the reaction progressed. This implied that this bond may be a key chemical group in this process. The density functional theory calculations demonstrated that *CONH was a pivotal intermediate during CN coupling, and a two-step CN coupling reaction path was proposed. *NH + *CO primarily transformed into *CONH, followed by the conversion reaction of *CONH + *NO to *NOCONH2. This study offers a groundbreaking approach for waste carbon utilization from DAC and holds the potential to furnish technical underpinnings for advancing electrochemical CN coupling methods.

Spatial Management of CO Diffusion on Tandem Electrode Promotes NH 2 Intermediate Formation for Efficient Urea Electrosynthesis

Efficient urea electrosynthesis from carbon dioxide and nitrate via alternating Cu–W bimetallic C–N coupling sites

Electrocatalytic Urea Synthesis with 63.5 % Faradaic Efficiency and 100 % N-Selectivity via One-step C-N coupling

Exploration of a novel electrochemical CN coupling process: Urea synthesis from direct air carbon capture with nitrate wastewater

Tuning Intermediates Adsorption and C─N Coupling for Efficient Urea Electrosynthesis Via Doping Ni into Cu

Rectifying Heterointerface Facilitated C‐N Coupling Dynamics Enables Efficient Urea Electrosynthesis Under Ultralow Potentials

Urea Synthesis via Coelectrolysis of CO2 and Nitrate over Heterostructured Cu-Bi Catalysts

Efficient urea electrosynthesis via coordination of the reaction rate of carbon dioxide and nitrate co‐reduction

Promoting Electroreduction of CO2 and NO3− to Urea via Tandem Catalysis of Zn Single Atoms and In2O3‐x

A Strongly Coupled Metal/Hydroxide Heterostructure Cascades Carbon Dioxide and Nitrate Reduction Reactions toward Efficient Urea Electrosynthesis

Efficient C-N Coupling for Urea Electrosynthesis on Defective Co3O4 with Dual-Functional Sites

Ambient electrosynthesis of urea with nitrate and carbon dioxide over a CuRu alloy catalyst

Tandem Catalysts Enabling Efficient C‐N Coupling toward the Electrosynthesis of Urea

The Tandem Nitrate and CO2 Reduction for Urea Electrosynthesis: Role of Surface N‐Intermediates in CO2 Capture and Activation

Oxide-Derived Core-Shell Cu@Zn Nanowires for Urea Electrosynthesis from Carbon Dioxide and Nitrate in Water.

Kinetically matched C–N coupling toward efficient urea electrosynthesis enabled on copper single-atom alloy

Selective Electrochemical Urea Synthesis from Nitrate and CO2 Using in Situ Ru Anchoring Onto a Three-Dimensional Copper Electrode

Electrochemical Synthesis of Urea: Co‐Reduction of Nitrite and Carbon Dioxide on Binuclear Cobalt Phthalocyanine

Electrochemical Synthesis of Urea: Co-reduction of Nitric Oxide and Carbon Monoxide

Highly Efficient and Selective Electrosynthesis of Urea Via Co-Reduction of Carbon Dioxide and Nitrate over the TiNX Catalyst

Electrocatalysts for Urea Synthesis from CO2 and Nitrogenous Species: from CO2 and N2/NOx Reduction to urea synthesis